首页>外文会议>Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008

Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008

召开年：2008
召开地：Haifa(IL);Haifa(IL);Haifa(IL)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.ELECTROMECHANICAL RESPONSE OF LARGE STRAIN FERROELECTRIC ACTUATORS

机译：大型应变铁电致动器的机电响应
- 作者：Doron Shilo;Amir Mendelovich;Haika Drezner
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
2.A NEW INSTRUMENT FOR TENSILE TESTINGS OF THIN FREE STANDING FILMS AT HIGH STRAIN RATES

机译：用于高应变率的稀薄自由拉伸膜拉伸测试的新仪器
- 作者：Eran Ben-David;Doron Shilo;Daniel Rittel;David Elata
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
3.3D FINITE ELEMENT MODELING OF MOLYBDENUM EQUAL CHANNEL ANGULAR PRESSING

机译：钼等通道角挤压的3D有限元建模
- 作者：Padan Royi;Gorni David;Rubinson Leonid;Faran Eilon;Gilad Man;Weissberg Shani;Yosibash Zohar
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
4.Health Monitoring of Adhesive Joints using Magnetostrictive Fillers

机译：使用磁致伸缩填料对胶粘接头进行健康监测
- 作者：Yarden B. Weber;Daniel Schweitzer;Hedva Bar;Doron Shilo
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
5.Deformation Behavior of a Shape Memory Alloy, Nitinol

机译：形状记忆合金镍钛诺的变形行为
- 作者：Samantha Daly;Kaushik Bhattacharya;Guruswami Ravichandran
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
6.Full Field Strain Measurement in Split Hopkinson Bar Experiments

机译：霍普金森分流棒实验中的全场应变测量
- 作者：Amos Gilat;Tim Schmidt;John Tyson;Andrew Walker
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
7.Study of Sheet Metal Properties to Improve Drawability of Hydroformed Parts

机译：研究钣金性能以改善液压成形零件的可拉伸性
- 作者：A. Shirizly
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
8.Analytical and Numerical Study of Crushing of Syntactic Foams Under Uniaxial Compression

机译：单轴压缩下复合泡沫破碎的分析与数值研究
- 作者：Prabhakar Marur
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
9.Nanostructuring Pure Zr by Severe Plastic Deformation

机译：通过严重塑性变形纳米结构化纯Zr
- 作者：M.T. Perez-Prado;A. P. Zhilyaev;L. Jiang;M.E. Kassner;O.A. Ruano
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
10.Work Output Enhancement of Ferromagnetic Shape Memory Micro Actuators

机译：铁磁形状记忆微执行器的工作输出增强
- 作者：Yaniv Ganor;Doron Shilo
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
11.IN-SITU INVESTIGATION of PLASTICITY at NANO-SCALE

机译：纳米级可塑性的现场调查
- 作者：Julia R. Greer;Ju-Young Kim;Steffen Brinckmann
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
12.IN-SITU ELECTRON MICROSCOPY TESTING OF 1-D NANOSTRUCTURES

机译：一维纳米结构的原位电子显微镜测试
- 作者：Horacio D. Espinosa
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
13.A Reexamination of the Extraction of Material Properties using Nanoindentation

机译：使用纳米压痕技术对材料性质的提取进行重新检验
- 作者：B. Poon;D. Rittel;G. Ravichandran
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
14.Lost Work in an Ecosystem Used as an Environmental Impact Index

机译：生态系统中的工作损失作为环境影响指数
- 作者：Sosimo E. Diaz-Mendez;Jose Maria Rodriguez-Lelis;Abel Hernandez-Guerrero;Rosa Hilda Chavez
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
15.OPERATION OF THE SIEMENS SOFC GENERATORS CHP100 AND SFC5 IN A MECHANICAL FACTORY

机译：西门子SOFC发电机CHP100和SFC5在机械工厂中的运行
- 作者：Vittorio Verda;Gianmichele Orsello;Gianni Disegna;Ferrante Debenedictis
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
16.INVESTIGATIONS OF THERMAL DEFORMATIONS AND THEIR COMPENSATION IN CTX 210 V3 LATHE SLIDE

机译：CTX 210 V3车床滑块的热变形及其补偿的研究
- 作者：Jakub OLSZEWSKI;Wojciech PTASZYNSKI;Roman STANIEK
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
17.TIME-VARYING NONLINEAR DESIGNS FOR UNDERACTUATED ATTITUDE CONTROL WITH TWO REACTION WHEELS

机译：带有两个反应轮的动力不足姿态控制的时变非线性设计
- 作者：Congying Han;Alexandre N. Pechev
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
18.COMPUTER MODELING OF THE PRORERTIES OF CARBON NANOTUBES AND COMPOSITE MATERIALS

机译：碳纳米管和复合材料性能的计算机建模
- 作者：L.V. Bochkareva;D.M. Sanikovich
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
19.NONDESTRUCTIVE EVALUATION OF SOME MEDICAL PROSTHESIS COMPONENTS MADE FROM SYNTHERIZED ZIRCONIUM OXIDES USING US SPECTROSCOPY

机译：用光谱法对合成的氧化锆制成的某些医用假体成分进行非破坏性评估
- 作者：Raimond Grimberg;Adriana Savin;Rozina Steigmann;Alina Bruma;Sorin Leitoiu
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
20.ANALYSIS OF CMM ACCURACY IN THE MEASUREMENT OF ROUNDNESS

机译：圆度测量中CMM精度的分析
- 作者：Bartosz GAPINSKI;Miroslaw RUCKI
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
21.DIMENSIONAL INSPECTION SYSTEMS BASED ON AIR GAUGES

机译：基于气隙的尺寸检测系统
- 作者：Miroslaw Rucki;Branimir Barisic;Zofia Jaskolska
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
22.VIRTUAL EVALUATION FOR MACHINE TOOL DESIGN

机译：机床设计的虚拟评估
- 作者：Masahiko Mori;Zachary I. Piner;Ke Ding;Adam Hansel
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
23.GLUCOSE OXIDATION BY NANO-FIBROUS ANODES IN A FUEL CELL

机译：燃料电池中纳米纤维阳极对葡萄糖的氧化
- 作者：Pinchas Schechner;Eugenia Bubis;Hana Faiger;Eyal Zussman;Ehud Krolt
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
24.PERFORMANCE COMPARISON FOR A CONSTRUCTAL-BASED FLOW FIELD PATTERN IN A SINGLE PEMFC

机译：单PEMFC中基于结构的流场模式的性能比较
- 作者：C. E. Damian-Ascencio;A. Hernandez Guerrero;J.A. Escobar Vargas;S. Cano-Adrade;Elizalde Blancas
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- construtal-based;
- PEMFC;
25.ENTROPY GENERATION IN A SOLID OXIDE FUEL CELL

机译：固体氧化物燃料电池中的熵产生
- 作者：Adriano Sciacovelli;Vittorio Verda
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
26.THE EVALUATION OF STRAIN, MICROSTRUCTURAL ASPECTS AND SOME MECHANICAL PROPERTIES OF NANO-GRAINED ALUMINUM PROCESSED BY ACCUMULATIVE ROLL BONDING USING 2, 3 AND 4 INITIAL STRIPS

机译：用2、3和4初始条带累积轧制键合工艺处理纳米粒化铝的应变，微观结构和一些力学性能的评估
- 作者：Luchian Zaharia;Radu Comaneci;Constantin Baciu;Nicanor Cimpoesu
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
27.A NEW CONCEPT OF A LARGE-WORKS PACE SMALL-SIZE BENDING BELLOW ACTUATOR

机译：大型工件小尺寸弯曲波纹管执行器的新概念
- 作者：Alon Wolf;Gabor Kosa
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
28.Dynamic Properties of Delaminated Braided Textile Composite Beams

机译：层状编织纤维复合材料梁的动力特性
- 作者：Benjamin Dauda;S. Olutunde Oyadiji;Prasad Potluri
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
29.METALLIC STEREOLITHOGRAPHY

机译：金属立体成像
- 作者：Jorge Gaspar;Paulo Jorge Bartolo
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- cure;
- rheology;
- stereolithography;
30.PRODUCTION AND MATERIAL REQUIREMENTS PLANNING IN MANUFACTURING-TO-ORDER ENVIRONMENTS: AN APPLICATION TO MACHINING CENTERS PRODUCTION

机译：按订单生产环境中的生产和物料需求计划：在加工中心生产中的应用
- 作者：Tullio Tolio;Marcello Urgo;Arianna Alfieri
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
31.AN INNOVATIVE ELECTROFORMING PROCESS FOR OIL HEATED ROTATIONAL MOULDING TOOLS

机译：油加热旋转成型工具的创新电铸工艺
- 作者：Mario Monzon;Pedro M. Hernandez;Antonio N. Benitez;Maria D. Marrero;Maria A. Alvarez;Mark Kearns
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- rapid tooling;
- rapid prototyping;
- electroforming;
- rotational moulding;
- oil heating;
32.SHAPING OF THE FACE WORM GEAR BY MEANS OF THE SINGLE EDGE CUTTING TOOL

机译：用单刃切削工具成型面蜗轮
- 作者：Roman STANIEK
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
33.COMPUTER AIDED MANUFACTURABILITY ANALYSIS CLOSING THE CAD-CAM KNOWLEDGE GAP

机译：关闭CAD-CAM知识差距的计算机辅助制造能力分析
- 作者：Gilla Molcho;Pawel Kowalski;Ronit Schneor;Berend Denkena;Yaron Zipori;Moshe Shpitalni
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
34.FAST FRACTURE IN SLOW MOTION

机译：慢动作快速断裂
- 作者：Ariel Livne;Gil Cohen;Jay Fineberg
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
35.IN-PROCESS SURFACE NORMAL ESTIMATION FOR RASTER SCANNED POINT CLOUD DATA

机译：栅格点云数据的处理中表面法线估计
- 作者：Vijay Srivatsan;Reuven Katz
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
36.RECONFIGURABLE MACHINES

机译：可重构机器
- 作者：Reuven Katz;Yoram Koren
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
37.CMM MEASUREMENT UNCERTAINTY REDUCTION VIA SAMPLING STRATEGY OPTIMIZATION

机译：通过采样策略优化来降低CMM测量不确定度
- 作者：Giovanni Moroni;Stefano Petro
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
38.PROJECT SCHEDULING WITH FEEDING PRECEDENCE RELATIONS: AN APPLICATION TO PRODUCTION PLANNING

机译：具有进给优先关系的项目计划：在生产计划中的应用
- 作者：Tullio Tolio;Marcello Urgo;Arianna Alfieri
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
39.On the Nonlinear Vibrations of Clamped Oval Shells

机译：夹紧椭圆形壳体的非线性振动
- 作者：S. M. Ibrahim;B. P. Patel;Y. Nath
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
40.A DOE APPROACH FOR SENSITIVITY ANALYSIS OF A SHAPE PARTITIONING ALGORITHM

机译：形状分割算法敏感性分析的DOE方法
- 作者：Martina Gandini;Suela Ruffa
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
41.DIGITAL LAYER MANUFACTURING CHANCES AND CHALLENGES

机译：数字层制造的变化和挑战
- 作者：Gideon N. Levy
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- rapid manufacturing, rapid prototyping, SLS selective laser sintering;
- SLM selective laser melting, SLA stereolithography;
42.3D MULTI-SCALE TOPOGRAPHY ANALYSIS IN SPECIFYING QUALITY OF HONED SURFACES

机译：指定修整表面质量的3D多尺度层析成像分析
- 作者：Leila SABRI;Sabeur MEZGHANI;Mohamed EL MANSORI;Jean-Vincent LE LAN;Tommaso DAL NEGRO
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- honing;
- surface texture;
- multiscale analysis;
- abrasion;
43.LEAST SQUARES FITTING OF ANALYTIC PRIMITIVES ON A GPU

机译：在GPU上最小二乘法拟合分析原语
- 作者：Meghashyam Panyam;Thomas R. Kurfess;Thomas M. Tucker
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
44.BEYOND LEAN MANUFACTURING: DEVELOPING AN INTEGRATED METHODOLOGY TO DESIGN EFFECTIVE MANUFACTURING SYSTEMS

机译：超越精益制造：开发一种集成方法来设计有效的制造系统
- 作者：Marco Cantamessa;Francesca Montagna
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
45.VIRTUAL FUSION: HYBRID PROCESS SIMULATION AND EMULATION-IN-THE-LOOP

机译：虚拟融合：混合过程仿真和循环仿真
- 作者：William S. Harrison;Dawn Tilbury
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
46.DIGITAL MANUFACTURING OF IMPLANT BASED DENTAL RESTORATIONS

机译：基于植入物的牙齿修复的数字化制造
- 作者：Ming C. Leu;Parthiban Delli
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- CAD/CAM;
- rapid prototyping;
- direct digital manufacturing;
- dental restoration;
47.KNOWLEDGE BASED APPROACH TO ASSEMBLY SYSTEM REUSE

机译：基于知识的组装系统重用方法
- 作者：Robert Harms;Timo Fleschutz;Guenther Seliger
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- knowledge based systems;
- assembly systems;
- reuse;
48.CONTROL OF A TWO-STAGE ASSEMBLE-TO-ORDER MANUFACTURING SYSTEM UNDER DEMAND AND CAPACITY UNCERTAINTIES

机译：具有需求和容量不确定性的两阶段按订单生产系统的控制
- 作者：Oben Ceryan;Yoram Koren;Izak Duenyas
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
49.PARAMETRIC STUDY OF INSTALLED FOGGING SYSTEMS USING CFD MODEL

机译：基于CFD模型的雾化系统参数化研究
- 作者：Y. Hain;V. Litinetski;A. Litinetsky
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- gas turbine;
- output;
- augmentation;
- fogging;
- CFD;
50.A ROUGH-CUT COST ESTIMATION IN A FINITE-CAPACITY STOCHASTIC ENVIRONMENT BASED ON FORCED IDLE TIME PREDICTION

机译：基于强制空闲时间预测的有限容量随机环境中的粗切成本估算
- 作者：Mark Eklin;Yohanan Arzi;Avraham Shtub
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
51.ASSEMBLY SYSTEM RECONFIGURATION PLANNING USING GENETIC ALGORITHM

机译：遗传算法的装配系统重构规划
- 作者：A. Bryan;S. J. Hu;Y. Koren
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
52.PROCESSING-STRUCTURE-PROPERTY RELATIONSHIPS IN HIERARCHICALLY-STRUCTURED POLYMER COMPOSITES FOR MULTIFUNCTIONAL STRUCTURES

机译：多功能结构的多层结构聚合物复合材料中的加工-结构-性能关系
- 作者：Hugh A. Bruck
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
53.CMM MEASUREMENT VARIABILITY ANALYSIS: A COMPARISON BETWEEN TWO METROLOGICAL LABORATORIES MEASURING THREE INDUSTRIAL WORKPIECES

机译：CMM测量变异性分析：两个计量实验室测量三个工业工件的比较
- 作者：Francesco Aggogeri;Emanuele Barini;Raffaello Levi
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
54.MULTI-MATERIAL FREEFORM FABRICATION OF ACTIVE SYSTEMS

机译：主动系统的多材料自由形式制造
- 作者：Evan Malone;Hod Lipson
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- multimaterial;
- multi-process;
- freeform fabrication;
- additive manufacturing;
- rapid prototyping;
- open-source;
55.MODELLING OF HARD BROACHING

机译：硬分组建模
- 作者：Konrad Wegener;Guilherme E. Vargas;Friedrich Kuster;Fabio W. Pinto;Thomas Schnider
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
56.CO-EVOLUTION GENETIC ALGORITHM FOR UAV DISTRIBUTED TRACKING IN URBAN ENVIRONMENTS

机译：城市环境中无人机分布式跟踪的协同进化遗传算法
- 作者：Vitaly Shaferman;Tal Shima
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
57.ORMAT RANKINE CYCLE CONFIGURATIONS FOR UTILIZATION OF LOW TEMPERATURE HEAT SOURCES

机译：利用低温热源的Ormat RANKINE循环构型
- 作者：Lucien Y. Bronicki
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
58.METHODICAL APPROACH TO FACTORY PLANNING REGARDING A LEAN PRODUCTION SYSTEM

机译：关于精益生产系统的工厂规划的系统方法
- 作者：Uwe Dombrowski;Markus Palluck
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
59.SOLUTIONS FOR MODELLING THE ENERGY INPUT IN ELECTRON BEAM MATERIAL PROCESSING

机译：电子束材料加工中能量输入建模的解决方案
- 作者：Michael F. Zaeh;Stefan Lutzmann;Gregor Branner;Gerhard Strasser
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
60.A NOVEL GAS-ASSIST ATOMIZER FOR POWER STATIONS

机译：新型燃气站气体辅助雾化器
- 作者：M. P. Levitsky;E. Korin;J. Haddad;S.P. Levitsky;Y.Levy;V. Sherbaum;V. Ovcharenko;Y. Bercovich
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
61.DESIGN, DEVELOPMENT AND CHARACTERIZATION OF A MICRO-REACTOR FOR FAST PYROLYSIS OF BIOMASS FEEDSTOCKS

机译：微生物反应器快速热解微反应器的设计，开发和表征
- 作者：J. Rhett Mayor;Alex Williams
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
62.ANALYSIS OF THE PRODUCTION VARIABILITY IN MANUFACTURING LINES

机译：生产线生产变异性分析
- 作者：Colledani M.;Matta A.;Tolio T.
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
63.GUIDANCE LAW BASED ON DIFFERENTIAL GAMES FOR HIGH ORDER INPUT CONSTRAINED MISSILE AND TARGET

机译：基于微分游戏的高阶输入受限导弹和目标制导律
- 作者：Ilan Rusnak;Gyorgy Hexner
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
64.MODELLING THE EVOLUTION OF PACKAGING SYSTEMS FOR PRODUCT VARIATION

机译：模拟产品变化的包装系统的演变
- 作者：Jason Matthews;Baljinder Singh;Glen Mullineux;Tony Medland
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
65.THE PROBLEM OF DISTRIBUTED WIRELESS SENSORS POSITIONING IN THE MOBILE SPATIAL COORDINATE MEASURING SYSTEM (MSCMS)

机译：移动空间坐标测量系统（MSCMS）中的分布式无线传感器定位问题
- 作者：Fiorenzo Franceschini;Maurizio Galetto;Domenico Maisano;Luca Mastrogiacomo
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
66.EXPERIMENTAL ANALYSIS OF PROCESS AND LASER PARAMETERS IN LASER MARKING

机译：激光打标过程和激光参数的实验分析
- 作者：Jean-Pierre Kruth;Evren Yasa
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- laser marking;
- experimental design;
- selective laser erosion;
67.SAMPLING POINT SEQUENTIAL DETERMINATION BY KRIGING FOR TOLERANCE VERIFICATION WITH CMM

机译：用Krig进行采样点序列确定的CMM公差验证
- 作者：G. Barbato;E. M. Barini;P. Pedone;D. Romano;G. Vicario
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
68.EEXTENDED GEOMETRIC FILTER FOR RECONSTRUCTION AS A BASIS FOR COMPUTATIONAL INSPECTION

机译：扩展的几何过滤器可作为计算检验的基础进行重建
- 作者：Alexander Miropolsky;Anath Fischer
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
69.HYBRID LIQUID DESICCANT / VAPOUR COMPRESSION AIR-CONDITIONING SYSTEMS: A CRITICAL REVIEW

机译：混合液体干燥剂/蒸汽压缩空调系统：一项重要的评论
- 作者：Roza I. Christodoulaki;Emmanuil D. Rogdakis;Irene P. Koronaki
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
70.Thermo-Mechanical Aspects of Adiabatic Shear Failure of AM50 and Ti6A14V Alloys

机译：AM50和Ti6A14V合金绝热剪切失效的热机械方面
- 作者：D. Rittel;Z. G. Wang
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- Mg AM50;
- Ti6Al4V;
- adiabatic shear band;
- IR detectors;
- hopkinson bar;
71.IN-LINE INSPECTION OF ENGINE VALVE SEATS USING A NON-CONTACT RANGE SENSOR

机译：使用非接触式范围传感器对发动机阀门座进行在线检查
- 作者：Vijay Srivatsan;Bartosz Powalka;Reuven Katz;John Agapiou
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
72.HIGH STIFFNESS CLOSED-FORM KINEMATIC STRUCTURAL DESIGN OF A LOW-COST 4/5-AXIS MICRO/MESO-SCALE INVERTED HIGH-SPEED MACHININGCENTER

机译：低成本4/5轴微/中尺度倒置高速加工中心的高刚度闭式运动结构设计
- 作者：J.Rhett Mayor;Edward Kimn
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
73.DEFORMATION AND FRACTURE OF A SILICATE MELT AROUND Tg: IMPLICATIONS TO DYNAMICS OF VOLCANIC ERUPTIONS

机译：Tg周围硅质熔体的形变和断裂：对火山喷发动力学的影响
- 作者：Mie Ichihara;Daniel Rittel;M. B. Rubin
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
74.SEN ANALYSIS OF STRATIFIED HOT WATER HEAT STORES WITH RESPECT TO AXIAL POSITION AND NUMBER OF CHARGING-DISCHARGING EQUIPMENTS

机译：分层热水储藏的轴向位置和充放电设备数量的SEN分析
- 作者：Varghese Panthalookaran
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
75.MODELING THE MANUFACTURING COST OF SOLID OXIDE FUEL CELLS

机译：固体氧化物燃料电池的制造成本建模
- 作者：Isa Bar-On;Tracey S. Vincent;Mark Koslowske;Heather K. Woodward-Hagg
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
76.EXPERIMENTAL AND FINITE ELEMENT ANALYSIS OF THE THERMAL-ELECTRIC PROCESS IN MONOPOLAR ELECTROSURGICAL THERMAL MANAGEMENT

机译：单极电热管理中热电过程的实验和有限元分析
- 作者：Jacob S. Gee;Robert E. Dodde;James D. Geiger;Albert J.Shih
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
77.THE INFLUENCE OF VALVE SEATS MACHINING PROCESS ON ROUNDNESS ERROR

机译：阀座加工工艺对圆度误差的影响
- 作者：Bartosz Powaika;Reuven Katz
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
78.GENERATION OF RESIDUAL STRESSES IN COMPOSITES

机译：复合材料中残余应力的产生
- 作者：PAUL BARSANESCU;RAIMOND GRIMBERG;PETRU CARLESCU
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
79.ADVANCED FERROELECTRIC MFC ACTUATORS: THE EFFECT OF FERRO- ELASTIC DOMAIN SWITCHING

机译：先进的铁电MFC执行器：铁弹性域切换的影响
- 作者：Uri Kushnir;Oded Rabinovitch
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
80.CAE TOOLS AS VALID OPPORTUNITY TO IMPROVE QUALITY CONTROL SYSTEMS PERFORMANCES FOR SHEET METAL FORMED COMPONENTS

机译：CAE工具是提高钣金件质量控制系统性能的有效机会
- 作者：Antonio Del Prete;Teresa Primo;Alfredo Etia
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
81.ALUMINUM SHIELD UNDER HYPERVELOCITY IMPACT OF MYLAR FLYER

机译：聚酯薄膜超高速冲击下的铝屏蔽
- 作者：J. Zhao;F. Tan;C. Liu;C. Sun
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
82.DETERMINATION OF FULL SET ELASTIC CONSTANTS FOR COMPOSITE MATERIALS ON BASIS OF FREQUENCY RESPONSE ANALYSIS, FEA, AND GA

机译：基于频率响应分析，FEA和GA的复合材料全弹性常数的确定
- 作者：Arcady Soloviev;Anton Bychkov;Maria Shevtsova
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
83.IMPROVED MATERIALS FOR DIELECTRIC ELASTOMER ACTUATORS

机译：介电弹性体的改良材料
- 作者：Dorina Opris;Martin Molberg;Christiane Loewe;Frank Nueesch;Christopher Plummer;Yves Leterrier
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
84.RAPID MANUFACTURING USING INFILTRATION SELECTIVE LASER SINTERING

机译：使用渗透选择性激光烧结进行快速制造
- 作者：David L. Bourell;Phani Vallabhajosyula;Brooke Stevinson;Ssuwei Chen;Joseph J. Beaman Jr.
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
85.NEW DEVELOPMENT IN COMPUTER AIDED ELECTROFORMING FOR RAPID PROTOTYPING APPLICATIONS

机译：快速原型应用计算机辅助电铸的新进展
- 作者：Mario Monzon;Pedro M. Hernandez;Maria D. Marrero;Antonio N. Benitez;Fernando Ortega;Ayoze Socas
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- electroforming;
- rapid tooling;
- rapid prototyping;
- rapid manufacturing;
- cathodic orientation;
86.VIRTUAL SERVICE SYSTEM ENGINEERING

机译：虚拟服务系统工程
- 作者：Dieter Spath;Wilhelm Bauer;Manfred Dangelmaier
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
87.HSM MACHINING STABILITY DURING HARDENED STEELS MILLING PROCESS

机译：硬化钢铣削过程中的HSM加工稳定性
- 作者：Pawel Twardowski
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
88.DETERMINING NETWORK CONTROL SOLUTION DESIGNS FOR MANUFACTURING SYSTEMS

机译：确定制造系统的网络控制解决方案设计
- 作者：James Moyne;Dawn Tilbury
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
89.LIQUID-PHASE SINTERING OF TUNGSTEN CARBIDE-COBALT BY LASER RADIATION

机译：激光辐照碳化钨-钴的液相烧结
- 作者：Thorsten Glaeser;Axel Demmer;Fritz Klocke
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
- rapid manufacturing;
- laser sintering;
- cemented carbides;
90.Structured Optimization

机译：结构优化
- 作者：Maurizio Sperati
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
91.FLEXIBLE MANUFACTURING CELL'S CLAMPING FIXTURE

机译：灵活制造电池的夹具
- 作者：Peter Kostal;Karol Velisek
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
92.NB-DOPED BARIUM TITANATE: CONCENTRATION-PROPERTIES RELATIONS

机译：NB掺杂的钛酸钡：浓度-特性关系
- 作者：Shany Hershkovitz;Sioma Baltianski;Yoed Tsur
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
93.SOFTWARE TOOLS TO SUPPORT ADVANCED DESIGN TECHNIQUES AND PROCESSES

机译：支持先进的设计技术和过程的软件工具
- 作者：Michael M. Campbell
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
94.IN- SITU OBSERVATIONS OF DISLOCATION PATTERNING IN DEFORMED POLYCRYSTALLINE ALUMINUM

机译：变形多晶铝中位错形态的原位观察
- 作者：Peri Landau;Guy Makov;Roni Z. Shneck;Arie Venkert
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年
95.INTEGRATING NON-CAD DATA WITH REVERSE ENGINEERING TOOLS

机译：将非CAD数据与逆向工程工具集成
- 作者：Yoram Retter
- 会议名称：《Conference on engineering systems design and analysis;Biennial conference on engineering systems design and analysis;ESDA 2008》 | 2009年