首页>外文会议>ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007

ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007

召开年：2007
召开地：Las Vegas,NV(US);Las Vegas,NV(US);Las Vegas,NV(US);Las Vegas,NV(US)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.ADAPTIVE SUPPRESSION OF TORQUE HARMONICS IN BRUSHLESS MOTORS

机译：无刷电动机中转矩谐波的自适应抑制
- 作者：Farhad Aghili
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
2.SONAR MAP CONSTRUCTION FOR UBIQUITOUS ROBOTIC SYSTEM USING A FOOTPRINT ASSOCIATION FILTER

机译：基于脚印关联滤波器的泛音机器人系统声纳图构建
- 作者：Yu-Cheol Lee;Wonpil Yu;Jong-Hwan Lim;Wan Kyun Chung;Dong-Woo Cho
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
3.SPECIALISED IMAGE CAPTURE SYSTEMS FOR A DIET BREAST CANCER SCREENING SYSTEM

机译：饮食乳腺癌筛查系统的专用图像捕获系统
- 作者：Christopher E. Hann;J. Geoffrey Chase;Crispen Berg;Richard G. Brown;Rodney B. Elliot;XiaoQi Chen
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
4.STRESS INTENSITY FACTOR CALCULATION USING A WEIGHT FUNCTION METHOD

机译：加权函数法计算应力强度因子
- 作者：Rui Sun;Zongwen An;Hong-Zhong Huang;Qiming Ma
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
5.TOWARDS A GENERIC 'SINGLE-PATH PROGRAMMING' SOLUTION WITH REDUCED POWER CONSUMPTION

机译：降低功耗的通用“单路径编程”解决方案
- 作者：Ayman K. Gendy;Michael J. Pont
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
6.VARIANT INDICATION ANALYSIS: AN INTEGRATED COMPONENT OF A VARIABLE PROCESS MODEL FOR GLOBAL PLATFORMS

机译：变量指标分析：全球平台可变过程模型的集成组件
- 作者：Martin Gunzenhauser;Gregor E.J. Gander;Luca Bongulielmi
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
7.BRIDGING THE ABSTRACTION GAP FOR THE DESIGN OF EMBEDDED REACTIVE SYSTEMS USING ESTEREL - A CASE STUDY

机译：借助酯桥接间隙设计嵌入式反应系统-案例研究。
- 作者：Martin Zauner;Michael Kramer;Peter Balog
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- esterel;
- reactive systems;
- FSM;
- synchronous programming;
- abstraction gap;
- system design;
- design methodologies;
8.BARRIERS TO CREATIVITY IN ENGINEERING EDUCATION: A STUDY OF INSTRUCTORS AND STUDENTS PERCEPTIONS

机译：工程教育中创新的障碍：教师和学生知觉的研究
- 作者：Stephany Foley;Kazem Kazerounian
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
9.CHALLENGES IN GLOBALLY DISTRIBUTED PRODUCT DESIGN TEAMS: A CASE STUDY

机译：全球分布式产品设计团队的挑战：案例研究
- 作者：C. C. Hayes
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
10.CONTROL OF A HAPTIC INTERFACE AND A MICROMACHINING SETUP WITH AN OPEN SOURCE REAL-TIME SYSTEM

机译：开源实时系统控制触觉界面和微加工设置
- 作者：Evren Samur;Ulrich Spaelter;Lionel Flaction;Pascal Maillard;Hannes Bleuler;Rolf Wuethrich
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
11.DESIGN AND DEVELOPMENT OF A LOW-COST WIRELESS DATA GLOVE FOR REMOTE ROBOTIC HAND OPERATION

机译：用于远程机器人手操作的低成本无线数据手套的设计与开发
- 作者：Igor Labutov
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
12.DEVELOPMENT OF A FLEXIBLE EDUCATIONAL MECHATRONIC SYSTEM BASED ON xPC TARGET

机译：基于xPC目标的柔性教育机电系统的开发。
- 作者：Karim A. Tahboub;Mohammad I. Albakri;Aziz M. Arafeh
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
13.DEVELOPMENT OF A MECHANICALLY COUPLED, 6-AXIS FORCE-TORQUE SENSOR FOR HUMANOID ROBOTS

机译：机械耦合的人形机器人6轴力扭矩传感器的开发
- 作者：A-Ram SON;Jum-Ho Oh;Tae-Yang NOH;Wan-Suk YOO
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- humanoid robot;
- ZMP;
- force-torque sensor;
- data acquisition board;
- mechanically coupled design;
14.DEVELOPMENT OF A PRODUCTION INFORMATION MANAGEMENT SYSTEM TO SUPPORT ENVIRONMENTAL CSR ACTIVITIES FOR PROCESS PRODUCTION

机译：开发用于支持过程生产的环境CSR活动的生产信息管理系统
- 作者：Takafumi Shimizu;Satoshi Kanai;Masayuki Ichinohe;Toshijiro Ohashi;Yasuo Nakagawa
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
15.DEVELOPMENT OF A TECHNIQUE PREPARATION INTEGRATION SYSTEM WITH AGENT TECHNOLOGY

机译：基于Agent技术的技术准备集成系统的开发。
- 作者：Liu Xinhua;Wang Weida;Liu Wenjian;Xing Yue
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
16.EMBEDDING A C/C++ INTERPRETER INTO VIRTUAL INSTRUMENTS FOR SCRIPT BLOCKS

机译：将C / C ++解释器嵌入到脚本块的虚拟仪器中
- 作者：Hong Duan;Harry H. Cheng
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
17.HUMAN ROBOT COLLABORATION: AN AUGMENTED REALITY APPROACH A LITERATURE REVIEW AND ANALYSIS

机译：人类机器人协作：一种增强的现实方法，文献综述与分析
- 作者：Scott A. Green;Mark Billinghurst;XiaoQi Chen;J. Geoffrey Chase
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
18.IMPROVING THE PERFORMANCE OF TIME-TRIGGERED EMBEDDED SYSTEMS BY MEANS OF A SCHEDULER AGENT

机译：利用调度代理程序提高时间触发嵌入式系统的性能
- 作者：Ayman K. Gendy;Lei Dong;Michael J. Pont
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
19.INTEGRAL BUILDING DESIGN WORKSHOPS; A CONCEPT TO STRUCTURE COMMUNICATION

机译：整体建筑设计研讨会;结构通信的概念
- 作者：Perica Savanovic;Wim Zeiler
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
20.INTEGRAL DESIGN FOR STARTING A CULTURAL CHANGE IN DUTCH BUILDING DESIGN PRACTICE

机译：整体设计在荷兰建筑设计实践中开始文化变革
- 作者：Wim Zeiler;Emile Quanjel
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
21.LONGITUDINAL STUDY OF LEARNING OUTCOMES IN A NEW PRODUCT DEVELOPMENT CLASS

机译：新产品开发课程中学习成果的纵向研究
- 作者：Corie L. Cobb;Alice M. Agogino;Sara L. Beckman
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- new product development;
- alumni learning outcomes;
- alumni reflection;
- longitudinal assessment;
22.ON THE RELATIONSHIP BETWEEN THE RATIO OF CRACK-LENGTH TO PLATE-WIDTH AND THE STRESS INTENSITY FACTOR OF A PLATE CONTAINING A SINGLE THROUGH- THE-THICKNESS EDGE CRACK

机译：裂纹长度与板宽之比与含单板厚度裂纹的板的应力强度因子之间的关系
- 作者：Tongele N. Tongele
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
23.PROCESS PLANNING BY INTEGRATED DESIGN AND EVALUATION OF TECHNOLOGY CHAINS USING A STANDARD ERP-SYSTEM

机译：基于标准ERP系统的集成设计与技术链评估的过程计划
- 作者：Gunther Reinhart;Christian Lau;Stefan Mueller;Hans-Uwe Baron
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
24.RELATIVE MOTION EMULATING ROBOTIC SYSTEM AS A TEST BED FOR AERIAL REFUELING USING VISNAV AND MOBILE STEWART PLATFORMS

机译：相对运动仿真机器人系统作为使用VISNAV和移动式Stewart平台进行航空改装的试验床
- 作者：Changhwa Cho;John Junkins
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
25.ROBUST LAYOUT SYNTHESIS OF A MEM CRAB-LEG RESONATOR USING A CONSTRAINED GENETIC ALGORITHM

机译：基于约束遗传算法的记忆蟹腿谐振器的鲁棒布局合成
- 作者：Zhun Fan;Sofiane Achiche
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
26.A COST MODEL FOR THE METAL INERT GAS (MIG) WELDING PROCESS

机译：金属惰性气体（MIG）焊接过程的成本模型
- 作者：Pradeep Kumar Tipaji;Venkat Allada;Rajiv Mishra
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- MIG welding;
- cost model;
- cost component/driver;
27.A DESIGN PROCESS MODEL AND A COMPUTER TOOL FOR SERVICE DESIGN

机译：服务设计的设计过程模型和计算机工具
- 作者：Yoshiki SHIMOMURA;Tomohiko SAKAO;Erik SUNDIN;Mattias LINDAHL
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
28.A DESKTOP VR BASED MODULAR FIXTURE DESIGN TRAINING SYSTEM

机译：基于桌面VR的模块化夹具设计培训系统
- 作者：Peng Gaoliang;Liu Wenjian
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
29.A FLEXIBLE DESIGN AUTOMATION SYSTEM FOR TOOLSETS FOR THE ROTARY DRAW BENDING OF ALUMINIUM TUBES

机译：铝管旋转拉弯模具的灵活设计自动化系统
- 作者：Joel Johansson
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
30.A GREY SLIDING MODE CONTROLLER DESIGN FOR ANTILOCK BRAKING SYSTEM

机译：反锁制动系统的灰色滑模控制器设计
- 作者：Yesim Oniz;Erdal Kayacan;Okyay Kaynak
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
31.A SELECTION FRAMEWORK FOR DERIVATIVE PRODUCTS

机译：衍生产品的选择框架
- 作者：Alvaro J Rojas;Marcos Esterman;Jeanne M. Wesline;Matthew R. McLaughlin;Carol-Lynn Goldstein
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
32.A SIMULATION FRAMEWORK FOR ASSEMBLY/DISASSEMBLY PROCESS MODELING

机译：装配/镶嵌工艺建模的仿真框架
- 作者：Robert Iacob;Peter Mitrouchev;Jean-Claude Leon
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
33.A STUDY OF LIFE CYCLE COSTING IN THE PERSPECTIVES OF RESEARCH AND COMMERCIAL APPLICATIONS IN THE 21ST CENTURY

机译：21世纪研究和商业应用中的生命周期成本研究
- 作者：Wai M. Cheung;Linda B. Newnes;Antony R. Mileham;Robert Marsh;John D. Lanham
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
34.A SWARM ENGINEERING APPROACH TO MOBILE SENSOR NETWORK DESIGN TOWARDS COLLABORATIVE PHOTOTAXIS WITH A SLOWLY MOVING LIGHT SOURCE

机译：面向移动光网络的协同光轴的传感器网络设计的群体工程方法
- 作者：William Bourgeous;Shelley Rounds;YangQuan Chen
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- swarm engineering;
- swarm intelligence;
- cooperative;
- consensus;
- sensor networks;
- phototaxis;
- moving source;
35.AN APPROACH TOWARD ESTIMATING COST OF A NEW SYSTEM IN THE CONCEPTUAL DESIGN STAGE USING KNOWLEDGE-BASE

机译：基于知识库的概念设计阶段新系统成本估算方法
- 作者：Shun Takai
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- system;
- cost;
- concept;
- benchmarking;
- clustering;
- distribution;
36.APPLICATION OF TABLET COMPUTERS IN A CAPSTONE DESIGN COURSE

机译：平板电脑在CAPSTONE设计课程中的应用
- 作者：Brian Surgenor;Kevin Firth
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
37.ASSEMBLY CONCEPT OF A MAGNETIC LEVITATION SYSTEM FOR A LINEAR MICRO ACTUATOR

机译：线性微执行器的磁悬浮系统的装配概念
- 作者：S. Cvetkovic;C. Ruffert;Hans H. Gatzen
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
38.ASSESSMENT OF A PLASTIC OPTIC FIBRE SENSOR FOR THE MEASUREMENT OF STATIC AND DYNAMIC STRAINS

机译：用于测量静态和动态应变的塑料光纤传感器的评估
- 作者：Rongqiang Sun;S . Olutunde.Oyadiji
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
39.STATIC ANALYSIS OF CRANE GEARBOX QJC-D900

机译：起重机齿轮箱QJC-D900的静态分析
- 作者：Xiaoling Zhang;Qiang Miao;Hong-zhong Huang;Dan Ling;Zhonglai Wang
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
40.SIMULATION-BASED AND EXPERIMENTAL STUDIES OF SUBJECTIVE CLUSTERING AND BOOTSTRAP APPLICATION TO SUBJECTIVE CLUSTERING

机译：主群聚和自举法在主群聚中的基于仿真和实验研究
- 作者：Ramaprasad E Lakshminarayana;Nishant Bhardwaj;Shun Takai
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- subjective clustering;
- hierarchal clustering;
- bootstrap;
- customer needs;
41.SIMULTANEOUS PEDESTRIAN AND ROBOT LOCALIZATION TECHNIQUE IN AN INDOOR UBIQUITOUS ROBOTIC SPACE (URS)

机译：室内泛型机器人空间（URS）中的同时行人和机器人定位技术
- 作者：Hyo-Sung Ahn;Wonpil Yu
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
42.STUDY ON PRODUCT LIFE-CYCLE GENETIC ENGINEERING THEORY

机译：产品生命周期遗传工程理论研究
- 作者：Kezheng Huang
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
43.TACTILE WHOLE-FIELD IMAGING SENSOR ON PHOTOELASTICITY

机译：光弹性的触觉全场成像传感器
- 作者：Venketesh N Dubey;Gurtej S Grewal
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- whole-field sensor;
- photoelasticity;
- RGB methods;
- phase unwrapping;
- unconventional loading;
44.THE 'GDT KNOWLEDGE GAP' IN INDUSTRY

机译：行业中的“ GD＆T知识差距”
- 作者：Dean Watts
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
45.THE EFFECT OF TEAM INTERACTION ACTIVITY BASED ON CREATIVITY MODE SELF-AWARENESS FOR TEAM BASED CONCEPTUAL DESIGN PROJECT

机译：基于创意模式自我意识的团队交互活动对团队概念设计项目的影响
- 作者：MYUNG SOOK KIM;YONG SE KIM
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- personal creativity mode;
- self-awareness of creativity mode;
- team interaction;
- team composition;
46.VALIDATION OF DISTRIBUTED RISK FRAMEWORK

机译：验证分布式风险框架
- 作者：Peter Leung;Kosuke Ishii;Jan Benson;Jeffrey Abell
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- workshare;
- risk of rework;
- distributed risk framework;
- system risk;
- component risk;
47.VARIABILITY AND COMPONENT CRITICALITY IN COMPONENT REUSE AND REMANUFACTURING SYSTEMS

机译：组件重用和再制造系统中的变异性和组件关键性
- 作者：Vijitashwa Pandey;Deborah Thurston
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
48.VOICE AND ULTRASONIC SENSORS TO CONTROL AUTONOMOUS ROBOTS

机译：语音和超声波传感器可控制自主机器人
- 作者：Mohamed Fezari;Mounir Bousbia-Salah
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- speech recognition;
- voice command;
- hybrid methods;
- DTW;
- robots;
- microcontroller;
49.VISUALIZING ENERGY: HOW BIM INFLUENCES DESIGN CHOICES

机译：可视化能源：BIM如何影响设计选择
- 作者：Keith E. Hedges;Anthony S. Denzer
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- BIM;
- visualization;
- engineering education;
- architecture education;
- pedagogy;
50.WHAT SKILLS WILL FUTURE ENGINEERING GRADUATES NEED IN GLOBAL ORGANIZATIONS?

机译：全球组织对未来工程学有什么要求？
- 作者：C. C. Hayes;A. Pande
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
51.WIRELESS SENSING OF PHYSICAL PARAMETERS INSIDE HERMETICALLY ENCLOSED CONDUCTIVE ENVELOPES

机译：气密性封闭的导电包层内物理参数的无线传感
- 作者：Martin Kluge;Jordi Sabater;Josef Schalk;Luong v. Ngo;Helmut Seidel;Ulrich Schmid
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
52.AUTONOMOUS HELICOPTER FOR SURVEILLANCE AND SECURITY

机译：用于监控和安全的自主直升机
- 作者：P. Zingaretti;A. Mancini;E. Frontoni;A. Monteriu;S. Longhi
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
53.Axisymmetrical Stress Analysis and Strength of Epoxy-Steel Composite Cylinders Under Push-Off Loadings

机译：推力作用下环氧-钢复合材料圆筒的轴对称应力分析及强度
- 作者：Toshiyuki SAWA;Taro HASEGAWA
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
54.BUILDING COMPONENT BASED SOFTWARE CONNECTORS FOR COMMUNICATION MIDDLEWARE IN DISTRIBUTED EMBEDDED SYSTEMS

机译：为分布式嵌入式系统中的通信中间件构建基于组件的软件连接器
- 作者：Dietmar Schreiner;Karl M. Goeschka
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
55.CAD-BASED AUTOMATIC GENERATION OF ROBOT TRAJECTORY IN SHOE SPRAY SYSTEMS

机译：鞋喷雾系统中基于CAD的机器人轨迹自动生成
- 作者：Chuanyu Wu;Leiying He;Xudong Hu;Qinchuan Li
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- trajectory;
- orientations;
- NURBS;
- curve fitting;
- CAD-based;
56.CATEGORIES OF VISUAL QUALITY CUES

机译：视觉质量提示类别
- 作者：Karin Forslund;Rikard Soederberg
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
57.CANE MOUNTED KNEE-ABOVE OBSTACLE DETECTION AND WARNING SYSTEM FOR THE VISUALLY IMPAIRED

机译：视障者的拐杖安装在障碍物上方的拐杖检测和警告系统
- 作者：M Balakrishnan;Kolin Paul;Ankush Garg;Rohan Paul;Dheeraj Mehra;Vaibhav Singh;P.V.M. Rao;Vishwas Goel;Debraj Chatterjee;Dipendra Manocha
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
58.CAPILLARY FLOWS OF HIGHLY FILLED EPOXY/NI SUSPENSIONS FOR CONDUCTIVE ADHESIVE APPLICATIONS

机译：导电胶应用的高填充环氧树脂/ NI悬浮液的毛细管流
- 作者：Jianguo Zhou;Erol Sancaktar
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
59.Computer Integrated Design of Surfboard-Fins to Improve Turning Ability with Drag Force Reduction

机译：冲浪板鳍的计算机集成设计，可通过降低阻力来提高转向能力
- 作者：Haruo Sakamoto;Yukari Yanamoto
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- surfing;
- surfboard-fin;
- computational fluid dynamics;
- 3D-CAD;
- solid model;
- surface element model;
60.COMPUTER-AIDED LABORATORY WORK TO 'MECHANISM AND MACHINE SCIENCE' COURSE

机译：计算机辅助实验室在“机械与机械科学”课程中的工作
- 作者：Valentina V. Kuzlyakina;MarinaV. Nagaeva
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- laboratory practical work;
- computer support;
- structuring;
- dynamic;
- power transmission;
- cam;
61.CONCEPTS AND TOOLS FOR THE TEST OF THE COMMUNICATION SUB-SYSTEM OF TIME-TRIGGERED DISTRIBUTED EMBEDDED SYSTEMS

机译：时间触发分布嵌入式系统通信子系统测试的概念和工具
- 作者：Martin Horauer;Eric Armengaud;Andreas Steininger
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
62.CONTACT STRESS ANALYSIS OF GEAR OF CRANE GEARBOX

机译：起重机齿轮箱齿轮接触应力分析
- 作者：Zhonglai Wang;Hong-zhong Huang;Bo Yang;Qiang Miao;Dan Ling
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
63.DAMAGE DETECTION OF GEARBOX USING WAVELET-BASED SINGULARITY ANALYSIS METHOD

机译：基于小波奇异性分析的齿轮箱损伤检测
- 作者：Qiang Miao;Hong-Zhong Huang;Xianfeng Fan
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
64.DESIGN AND MANUFACTURING EDUCATION UTILIZED DIGITAL ENGINEERING

机译：利用数字工程的设计与制造教育
- 作者：Masashi YAMANAKA
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
65.DESIGN FOR DISASSEMBLY WITH HIGH-STIFFNESS, HEAT-REVERSIBLE LOCATOR-SNAP SYSTEMS

机译：高刚性，热可逆定位器-捕捉系统的拆卸设计
- 作者：Mohammed Shalaby;Kazuhiro Saitou
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
66.DEVELOPMENT OF EXTENDED WHEELCHAIR OPERATION OBSERVER TO ESTIMATE PRECISE TWO-DIMENSIONAL TILT INFORMATION

机译：扩展轮椅操作观察器的开发，以估计精确的二维倾斜信息
- 作者：Sehoon Oh;Yoichi Hori
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
67.Embracing Product Design Engineering

机译：拥抱产品设计工程
- 作者：Hugh Jack;John Farris;Shabbir Choudhuri;Princewill Anyalebechi;Charlie Standridge
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
68.INTERACTIVE IMAGE PROCESSING AND MANIPULATION

机译：交互式图像处理和操纵
- 作者：Stephen S. Nestinger;Harry H. Cheng
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
69.ENERGY SCAVENGING FOR WIRELESS SENSOR NETWORKS

机译：无线传感器网络的能源提升
- 作者：Xin Xue;Luis Gonzalez-Argueta;V. Sundararajan
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
70.EVALUATION OF PROCESSING EFFECTS ON POLYSTYRENE/CLAY NANOCOMPOSITES USING AN EXCIMER LASER

机译：用准分子激光评估聚苯乙烯/粘土纳米复合材料的加工效果
- 作者：I-Ta Chang;Erol Sancaktar
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
71.FABRICATION OF HIGH DENSITY SILICON NANO-DOTS BY EXCIMER LASER IRRADIATION ON BLOCK COPOLYMER MASKS

机译：准分子激光辐照在嵌段共聚物膜上制备高密度硅纳米点
- 作者：Dae Up Ahn;Erol Sancaktar
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
72.FEM STRESS ANALYSIS AND STRENGTH OF ADHESIVE-RIVETS COMBINATION JOINTS UNDER TENSILE SHEAR LOADINGS

机译：拉伸剪切载荷下胶粘组合节点的有限元应力分析与强度
- 作者：Toshiyuki Sawa;Ryo Nogaito
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
73.GEOMETRICAL ROBUST FORM DIVISION

机译：几何鲁棒形式划分
- 作者：Andreas Dagman;Rikard Soderberg
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
74.INTEGRAL DESIGN METHODOLOGY WITHIN INDUSTRIAL COLLABORATION

机译：产业合作中的整体设计方法论
- 作者：Wim Zeiler;Emile Quanjel
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
75.INTEGRATING TECHNOLOGY OBSOLESCENCE CONSIDERATIONS INTO PRODUCT DESIGN PLANNING

机译：将过时的技术考虑因素纳入产品设计计划中
- 作者：Kiri Feldman;Peter Sandbom
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- obsolescence;
- forecasting;
- operational amplifier;
- flash memory;
- DMSMS;
76.INTRODUCTION TO ENGINEERING THROUGH SERVICE-LEARNING

机译：通过服务学习进行工程介绍
- 作者：David Kazmer;John Duffy;Linda Barrington;Beverly Perna
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
77.MODELING AND CONTROL OF NONLINEAR SERIES ELASTIC ACTUATOR

机译：非线性串联弹性执行器的建模与控制
- 作者：Ehsan Basafa;Hassan Salarieh;Aria Alasty
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
78.MAKING DESIGN REVIEWS COUNT

机译：进行设计审阅数
- 作者：Kurt A. Beiter;Kosuke (Kos) Ishii;Harshavardhan (Harsh) Karandikar
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- design reviews;
- customer value chain analysis;
- failure modes and effects analysis;
- stage-gate process;
79.MANUFACTURABILITY-ORIENTED GROUND BEAM-JOINT TOPOLOGY OPTIMIZATION FOR MULTI-PIECE FRAME STRUCTURE DESIGN

机译：面向制造性的多层梁结构拓扑优化
- 作者：Myung-Jin Kim Young Kim;Gang-Won Jang;Yoon Young Kim
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
80.MECHANICAL PROPERTIES OF ELECTROSPUN CARBON NANOFIBER (ECNF)/EPOXY NANOCOMPOSITES

机译：电纺碳纳米纤维（ECNF）/环氧纳米复合材料的力学性能
- 作者：Darunee Aussawasathien;Erol Sancaktar
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
81.METAMODELING OF MECHATRONIC SYSTEMS IN THE MIXEDMODELS PLATFORM

机译：混合模型平台中机电系统的元建模
- 作者：Shilpa A. Vaze;Prakash Krishnaswami;James DeVault
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
82.MODELING AND SIMULATION OF FUEL CELL ELEVATOR BACKUP POWER SYSTEMS USING ADVANCED VEHICLE SIMULATOR

机译：先进车辆模拟器对燃料电池电梯后备电源系统的建模与仿真
- 作者：Yuliang Leon Zhou;Zuomin Dong
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
83.MODEL-BASED COMMUTATION OF BRUSHLESS PERMANENT MAGNET MOTORS FOR HIGH-SPEED MECHATRONIC SYSTEMS

机译：高速机电系统基于模型的无刷永磁电动机换相
- 作者：Martin Hosek;Roumen Botev
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
84.MULTI-PROCESS ROUTES DECISION-MAKING THROUGH INTEGRATION OF WORKFLOW TECHNOLOGY AND MAX-MIN ANT SYSTEM

机译：通过工作流技术和最大最小蚂蚁系统的集成进行多进程路由决策
- 作者：Liu Wenjian;Liu Xinhua;Jin Tianguo
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
85.MODELING UNCERTAINTY REDUCTION IN CONCURRENT ENGINEERING DESIGN TEAMS

机译：并行工程设计团队中的建模不确定性减少
- 作者：Francesca A. Barrientos;Irem Y. Turner;David G. Ullman
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- risk-based design;
- concurrent engineering;
- design teams;
- uncertainty;
- design theory and methodology;
- conceptual design;
86.MOTION CLASSIFICATION USING WIRELESS SENSORS FOR ACTIVITY MONITORING IN FIREFIGHTING

机译：使用无线传感器对运动进行分类以进行消防活动
- 作者：Nyugen Nyugen;V. Sundararajan;Victor B. Zordan
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
87.PARAMETER ESTIMATION FOR WEIBULL DISTRIBUTION USING SUPPORT VECTOR REGRESSION

机译：支持向量回归的威布尔分布参数估计
- 作者：Dan Ling;Qiang Miao;Hong-Zhong Huang;Bo Yang
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
88.PATH TRACKING DESIGN BASED ON JERK INPUT FRACTIONAL PREFILTER AND JERK LIMITED INPUT SHAPER APPROACHES

机译：基于Jerk输入分数阶和Jerk有限输入整形方法的路径跟踪设计
- 作者：Pierre Melchior;Rim Jallouli-Khlif;Bruno Orsoni;Nabil Derbel;Alain Oustaloup
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
89.PHOTOELASTIC STRESS ANALYSIS UNDER UNCONVETIONAL LOADING

机译：非常规载荷下的光弹应力分析
- 作者：Venketesh N Dubey;Gurtej S Grewal
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- photoelasticity;
- unconventional loading;
- RGB methods;
- phase unwrapping;
- stress analysis;
90.PROBABILISTIC ANALYSIS OF STATIC RESPONSE FOR TURBINE BLADE WITH PARAMETRIC UNCERTAINTY

机译：参数不确定的涡轮叶片静响应的概率分析
- 作者：An L.Q.;Wang Z.Q.
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
91.POLYMER COMPOSITE-BASED VIBRATION AND NOISE EMISSION CONTROLS FOR HAND-STRUCK IMPACT TOOLS

机译：基于聚合物复合材料的振动和噪声控制，用于手敲式冲击工具
- 作者：Matthew Griffith;Daniel Brisach;Janelle Konchar;Stephen Petfield;Peter Popper;James Glancey
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- hand-struck tools;
- engineering polymer;
- impact;
- finite element model;
- vibration;
92.PREDICTION OF ASSEMBLY VARIATION DURING EARLY DESIGN

机译：早期设计期间组件变化的预测
- 作者：Zuozhi Zhao;Michelle Bezdecny;Byungwoo Lee;Yanyan Wu;Dean Robinson;Mark Slagle;Duke Coleman;John Barnes;Steve Walls;Lowell Bauer
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
93.PROBABILISTIC ANALYSIS FOR COMPARING FATIGUE DATA BASED ON JOHNSON-WEIBULL PARAMETERS

机译：基于JOHNSON-WEIBULL参数的疲劳数据比较概率分析
- 作者：Brian L. Vlcek;Robert C. Hendricks;Erwin V. Zaretsky
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
94.PRODUCT DEVELOPMENT TASK PLANNING USING WORTH FLOW ANALYSIS OF INTERACTING COMPONENTS

机译：交互组件价值流分析的产品开发任务计划
- 作者：Toshiharu Miwa;Kosuke Ishii
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
95.REPRESENTATION OF SIMILARITY AND DEPENDENCY FOR MANUFACTURING PROCESS-BASED PRODUCT MODULARITY

机译：制造基于过程的产品模块化的相似性和依赖性
- 作者：Xiaoxia Lai;John K. Gershenson
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- modular design;
- modularity representation for manufacturing process;
- similarity;
- dependency;
96.RE-SHAPING SEMI-ACTIVE STRUCTURAL RESPONSE VIA SIMPLE APPLICATIONS OF EMBEDDED COMPUTATION, SENSORS AND VALVES

机译：通过嵌入式计算，传感器和阀门的简单应用来重塑半主动结构响应
- 作者：J. Geoffrey Chase;Kerry J. Mulligan;John B. Mander;Geoffrey W. Rodgers;Xiaoqi Chen
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
97.ROBUST CONTROL SYSTEM DESIGN FOR MULTIVARIABLE PLANTS WITH LIGHTLY DAMPED MODES

机译：轻阻尼模式多变量植物的鲁棒控制系统设计
- 作者：D. Nelson-Gruel;P. Lanusse;A. Oustaloup;V. Pommier
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
- lightly damped modes;
- MIMO;
- CRONE;
- control system;
- fractional order system;
- frequency domain;
98.SAAST ROBOTICS - AN INTENSIVE THREE WEEK ROBOTICS PROGRAM FOR HIGH SCHOOL STUDENTS

机译：SAAST ROBOTICS-高中学生的密集三周机器人程序
- 作者：David J. Cappelleri;James F. Keller;Terry Kientz;Peter Szczesniak;Vijay Kumar
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
99.SELECTED DISASSEMBLY PLANNING FOR PRODUCT MAINTAINABILITY

机译：针对产品可维护性的选定拆卸计划
- 作者：Qingjin Peng;Chulho Chung
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年
100.SIMULATION BASED OPTIMAL TOLERANCING FOR MULTIBODY SYSTEMS

机译：基于仿真的多体系统最优调优
- 作者：Henry Arenbeck;Samy Missoum;Anirban Basudhar;Parviz E. Nikravesh
- 会议名称：《ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2007》 | 2008年