首页>外文会议>ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007

ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007

召开年：2007
召开地：San Antonio,TX(US)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.CUSTOM MATERIAL MODELING WITHIN FEA FOR USE IN AUTOFRETTAGE SIMULATION

机译：有限元内的自定义材料建模，可用于自动装备模拟
- 作者：Michael C. Gibson;John G. Hetherington;Amer Hameed;Anthony P. Parker
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
2.ANALYTICAL MODELING OF HYDRAULICALLY EXPANDED TUBE-TO-TUBESHEET JOINTS

机译：液压扩展管对管接头的分析模型
- 作者：Nor Eddine Laghzale;Abdel-Hakim Bouzid
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
3.A NEW ULTRASONIC INSPECTION TECHNIQUE FOR FLAW DEPTH SIZING BASED ON SHORT PATH OF DIFFRACTION

机译：基于衍射短路径的缺陷深度超声检测新技术
- 作者：Shan Lin;Hiroyuki Fukutomi;Takashi Ogata
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
4.3D FINITE ELEMENT MODELING OF THE SWAGE AUTOFRETTAGE PROCESS INCLUDING THE BAUSCHINGER EFFECT

机译：包括鲍辛格效应在内的SWA自助过程的3D有限元建模
- 作者：E. Troiano;J.H. Underwood;R.R. de Swardt;A. M. Venter;A. P. Parker;C. Mossey
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
5.A Numerical Model for Evaluating the Residual Stress Field in an Autofrettaged Spherical Pressure Vessel Incorporating the Bauschinger Effect

机译：结合鲍辛格效应的自密封球形压力容器中残余应力场的数值模型
- 作者：M. Perl;J. Perry
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
6.AUTOFRETTAGE OF A SPHERICAL PRESSURE VESSEL

机译：球面压力容器的自组装
- 作者：Anthony P. Parker;Xiaoping Huang
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
7.AUTOFRETTAGED SPHERICAL PRESSURE VESSELS DESIGN

机译：自动分装的球形压力容器设计
- 作者：R. Adibi-Asl
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
- autofrettage;
- spherical vessel;
- optimum design;
8.AWJ PEFORMANCE CHARACTERSITICS AT 600 MPa

机译：600 MPa时的AWJ性能特征
- 作者：Mohamed Hashish
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
9.Coupled Thermo-Mechanical Modelling of Friction Stir Welding

机译：搅拌摩擦焊接的热力耦合模型
- 作者：Hongjun Li;Donald Mackenzie
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
- friction stir welding (FSW);
- thermomechanical;
- numerical modelling;
10.FATIGUE LIFE OF COMMERCIAL HIGH PRESSURE NEEDLE VALVES AND TEE ASSEMBLIES

机译：商业高压针阀和三通组件的疲劳寿命
- 作者：Mario L. Rovere;Michael D. Mann;William R. Culley
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
11.GUIDED WAVE C.U.I. INSPECTION

机译：引导波C.U.I.检查
- 作者：Michael Sens
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
12.IMPROVED DESIGN FOR HYPERCOMPRESSOR PACKING CUPS

机译：高压压缩机包装杯的改进设计
- 作者：Nicola Campo;Francesco Chiesi
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
13.HILL STRESS CALCULATIONS FOR AUTOFRETTAGED TUBES COMPARED WITH NEUTRON DIFFRACTION RESIDUAL STRESSES AND MEASURED YIELD PRESSURE AND FATIGUE LIFE

机译：与中子衍射残余应力和测得的屈服压力和疲劳寿命相比的自粘性管的山丘应力计算
- 作者：J. H. Underwood;R. R. deSwardt;A. M. Venter;E. Troiano;E. J. Hyland;A. P. Parker
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
14.INTERACTIONS BETWEEN BLAST LOADING AND DYNAMIC ELASTIC RESPONSE OF CONTAINMENT VESSELS

机译：围护容器的爆炸载荷与动态弹性响应之间的相互作用
- 作者：Q.Dong;Q.M.Li;J.Y.Zheng
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
- blast loading;
- dynamic elastic response;
- containment vessel;
15.LIMITATIONS OF ASME SECTION VIII DIVISION 3 PRESSURE VESSELS DESIGNED TO NON-MANDATORY APPENDIX J

机译：针对非强制性附录J设计的ASME第VIII分部3压力容器的限制
- 作者：Daniel T. Peters;Matthew Bernoskv
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
16.NEUTRON AND SYNCHROTRON DIFFRACTION MEASUREMENTS OF RESIDUAL STRESS IN STEEL WELDMENTS

机译：钢焊缝残余应力的中子和同质子衍射测量
- 作者：Anna M. Paradowska;John W.H. Price;Raafat Ibrahim
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
- neutron diffraction;
- synchrotron diffraction;
- residual stress;
- welding;
- beds-on-plate;
- post-weld heat treatment;
17.EXPERIMENTAL STUDY OF THREE-DIMENSIONAL IDENTIFICATION OF SEMI-ELLIPTICAL CRACK ON THE BACK SURFACE BY MEANS OF DIRECT-CURRENT ELECTRICAL POTENTIAL DIFFERENCE METHOD OF MULTIPLE-POINT MEASUREMENT TYPE

机译：多点测量类型直接电流电势差法对后表面半椭圆裂纹进行三维识别的实验研究
- 作者：Naoya TADA;Makoto UCHIDA;Akira FUNAKOSHI;Hiroki ISHIKAWA
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
18.COKE DRUM WELD INSPECTION

机译：焦炭桶焊接检查
- 作者：John McMillan
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
19.PHASED FLOW: THE ULTIMATE INITIATOR INJECTION SYSTEM

机译：分阶段流动：终极启动器注射系统
- 作者：Michael D. Mann
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
20.NEW CORROSION MAPPING TECHNOLOGY AT HIGH TEMPERATURE APPLICATION

机译：高温应用中的新腐蚀映射技术
- 作者：M. A. Saleem;A. A. Hulaibi;R. J. Carswell
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
21.Online AE Inspection and Safety Assessment of Vertical Storage Tank

机译：立式储罐在线AE检查和安全评估
- 作者：Guan Weihe;Tao Yuanhong;Chen Xuedong;Yuan Rong;Chen Yingfeng
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
22.REMOTE MEASUREMENT OF THE PIPE THICKNESS REDUCTION BY MICROWAVES

机译：微波降低的管道厚度的远程测量
- 作者：Yang Ju
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
23.STRESS RELAXATION IN ALUMINUM WELDING USING ULTRASONIC METHOD

机译：超声波法焊接铝中的应力松弛
- 作者：Marcilio H. Andrino;Auteliano A. dos Santos Jr.;Don E. Bray;Roseana E. Trevisan
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
24.RESEARCH AND DEVELOPMENT OF LOCALLY INSTALLED DAMPERS SUITABLE FOR INDUSTRIAL AND NON-INDUSTRIAL STRUCTURES BY USING DISPLACEMENT AMPLIFICATION MECHANISM

机译：利用位移放大机制研究适合工业和非工业结构的局部安装阻尼器的研究与开发
- 作者：Tomoyoshi WATAKAB;ESatoshi FUJITA
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
25.ULTRASONIC SENSORS FOR HEALTH MONITORING OF PRESSURE VESSELS: A SURVEY

机译：用于压力容器健康监测的超声波传感器：一项调查
- 作者：B. R. Tittmann
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
26.DETERMINATION OF RESIDUAL STRESSES IN AUTOFRETTAGED COMPOUND TUBES FOR DIFFERENT GEOMETRIES

机译：测定不同几何形状的自动装配复合管中的残余应力
- 作者：M. Mohammadi;G. H. Farrahi;S. H. Hoseini
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
27.Dynamic crack propagation and arrest in PWR pressure vessel steel:Interpretation of experiment with the X-FEM method

机译：压水堆压力容器钢中裂纹的动态扩展和阻止：X-FEM方法的实验解释
- 作者：B. Prabel;S. Marie;A. Combescure
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
28.EFFECT OF AUTOFRETTAGE IN THE THICK-WALLED CYLINDER WITH A RADIAL CROSS- BORE

机译：径向交叉孔在粗壁圆筒中自动装填的影响
- 作者：Hongjun Li;Richard Johnston;Donald Mackenzie
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
29.ELASTIC-PLASTIC J AND COD ESTIMATES FOR CIRCUMFERENTIAL THROUGH-WALL CRACKS BETWEEN ELBOWS AND STRAIGHT PIPES UNDER BENDING

机译：弯曲下弯头和直管之间周向贯穿壁裂纹的弹塑性J和COD估计
- 作者：Tae-Kwang Song;Yun-Jae Kim
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年
30.Fatigue Comparison of Different High Pressure Materials and Design Consequences

机译：不同高压材料的疲劳比较及设计后果
- 作者：Manfred POELZL
- 会议名称：《ASME(American Society of Mechanical Engineers) Pressure Vessels and Piping Conference 2007》 | 2008年