首页>外文会议>Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)

Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.THE ANALYSIS OF THE LONGITUDINAL IMPACT AND CONTACT IN CONE BITS- ROCK SYSTEM

机译：锥坑岩体纵向碰撞的分析。
- 作者：Lu Bo;Zhu Caichao;TangQian;Feng Daihui
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Cone bits;
- Rock;
- Touch impact;
- Longitudinal vibration;
2.TRANSMISSION OF FLOATING-TYPE INNER FRICTIONAL WHEEL

机译：浮动式内摩擦轮的传递
- 作者：Qu Xiuquan;Xue Yuan;Zhang Guangyun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Transmission;
- Frictional transmission;
- Floating-type;
- Transmission capability;
- Dynamic property;
3.AN ELECTRIC TRANSMISSION STRATEGY OF TRACKED VEHICLE WITH FUEL CELL

机译：燃料电池履带车辆的电动传动策略
- 作者：Wu Shijing;Lu Hongshan;Wang Xiaosun;Sun Xuan;Qian Bo
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Hybrid electric transmission;
- Fuel cell;
- Tracked vehicle;
- Harmonic gear;
- High-pressure hydrogen;
4.TRANSMISSION SYSTEM LOAD MODELING AND EXPERIMENTAL STUDY OF THE TRACKED VEHICLE TURN

机译：履带车辆转向的传输系统负荷建模与试验研究
- 作者：Li Jun;Song Haijun;Liu Xixia;Yao Xinmin
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Transmission load;
- Tracked vehicle turn;
- Hard ground;
5.RESEARCH ON THE RELATIONSHIP OF VIBRATION DOSE AND DRIVER’S FATIGUE ON MECHANICAL TRANSMISSION VEHICLES

机译：机械传动车辆振动剂量与驾驶员疲劳强度的关系研究
- 作者：Xu Zhongming;Ma Yongzhang;He Yansong;Zhang Zhifei;Huang Yi
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Estimated vibration dose;
- Driver;
- Fatigue;
- Vehicle;
6.RESEARCH ON WEAR SHAPE WHEN CUTTING AUSTEMPERED DUCTILE IRON (ADI) WITH PCBN TOOLS AND CERAMIC TOOLS

机译：用PCBN工具和陶瓷工具切割奥氏体球墨铸铁（ADI）时的磨损形状研究
- 作者：Guo Xuhong;Liu Gang;Shen Liang;Zhang Xinjian
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Austempered ductile iron(ADI);
- PCBN tools;
- Ceramic tools;
- Wear shape;
7.RESEARCH ON TRANSMISSION MECHANISM OF CHAIN LOADING /UNLOADING EQUIPMENT FOR MSW CONTAINER

机译：城市生活垃圾容器链装卸设备的传输机理研究
- 作者：Yang Xianhai;Lv Chuanyi
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Transmission mechanism;
- Chain;
- Sag;
- Motion stability;
- Tooth-leap;
8.USING RIGID-FLEXIBLE BODIES CONTACT ALGORITHM TO SIMULATE THE ASSEMBLE PROCESS OF MULTIBODY SYSTEMS WITH LARGE PRELOAD

机译：使用刚柔体接触算法模拟具有大预载的多体系统的装配过程
- 作者：Geng Haipeng;Qi Shemiao;Yu Lie
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Large preload;
- Rigid-flexible bodies;
- Contact algorithm;
- Assistant part;
9.THE WEAR AND FATIGUE CHARACTERISTICS OF FE-MN-SI SMA

机译：FE-MN-SI SMA的磨损和疲劳特性
- 作者：Wang Jingang;Lin Chengxin;Wang Guixin;Lin Suzhong;Gao Ermiao
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Shape memory alloy;
- Friction;
- Wear;
- Stress-induced γ→ε martensitic transformation;
- Fatigue life;
10.APPLICATION OF FEA IN THE DESIGN AND TCA OF CYLINDRICAL GEAR DRIVES WITH CROWNED TOOTH GEOMETRY

机译：有限元分析在齿形几何圆柱齿轮传动设计和三氯乙烯中的应用
- 作者：Qiming Lian
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- FEA;
- TCA;
- Transmission error;
- Tooth contact;
- Stress analysis;
11.INNOVATIVE SYNTHESIS OF EPICYCLIC GEAR TRAINS BASED ON KINEMATIC CHAIN WITH SINGLE JOINTS

机译：基于单链运动链的大齿轮齿轮的创新合成
- 作者：An Peiwen;Fang Lixia
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Kinematic chain;
- Epicyclic gear trains;
- Mechanism;
- Innovation;
12.SYSTEM SIMULATION OF DYNAMIC PERFORMANCE IN ANGULAR CONTACT BALL BEARING AT ULTRA HIGH-SPEED

机译：超高速角接触球轴承动态性能的系统仿真
- 作者：Li Songsheng;Chen Xiaoyang;Zhang Gang;Gao Gang;Gu Jianming;Lin Wenyuan;Hu Jiandong;Mao Haixiang
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Angular contact ball bearing;
- Ultra high-speed;
- Dynamic performance;
- System simulation;
13.NEW DEVELOPMENTS IN COMPUTERIZED DESIGN AND MANUFACTURING OF SPIRAL BEVEL AND HYPOID GEARS

机译：螺旋锥齿轮和双曲面齿轮的计算机化设计和制造的新发展
- 作者：Qi Fan;Ronald S. DaFoe;John W. Swanger
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Spiral bevel and hypoid gears;
- Face hobbing and face milling;
- UMC;
- TCA;
- Tooth surface correction;
14.THE IMPROVEMENT AND SIMULATION OF TRACKED VEHICLE SUSPENSION SYSTEM BASED ON APPLICATION OF ELECTRORHEOLOGICAL FLUIDS

机译：基于电动流变技术的履带车辆悬架系统的改进与仿真
- 作者：Wang Xiaosun;Wu Shijing;Sun Xuan;Lu Hongshan;Qian Bo;Deng Mingxing
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Electrorheological fluids;
- Semi-active Suspension System;
- Tracked Vehicle;
- Nonlinear Control Scheme;
15.CHARACTERISTICS OF FREQUENCY-DOMAIN RESPONSE FOR THE PARAMETRIC VIBRATION OF SPUR GEAR PAIR SYSTEM

机译：齿轮副系统参数振动的频域响应特性
- 作者：Han Qinkai;Wang Jianjun;Gao Xiongbing;Li Qihan
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Response characteristics;
- Parametric vibration;
- Spur gear pair;
16.EFFECT OF LOAD WAVEFORMS ON BENDING FATIGUE LIFE OF PLASTIC GEARS

机译：载荷波形对塑料齿轮弯曲疲劳寿命的影响
- 作者：Takao Koide;Satoshi Oda;Tatsuya Kawato;Kouitsu Miyachika
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear;
- Plastic;
- Bending fatigue life;
- Bending fatigue strength;
- Load waveform;
17.RESEARCH ON RAPID DESIGN OF MECHANICAL TRANSMISSION SYSTEM BASED ON THE TECHNOLOGY OF VIRTUAL PROTOTYPE

机译：基于虚拟样机技术的机械传动系统快速设计研究
- 作者：Wu Qingming;Li Yong;Bao Wujun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Virtual prototype;
- Rapid design;
- Mechanical transmission;
- CAD;
18.FREE VIBRATION CHARACTERISTICS OF COMPOUND PLANETARY GEAR SETS

机译：复合行星齿轮组的自由振动特性
- 作者：Qian Bo;Wu Shijing;Deng Mingxing
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Free vibration;
- Compound planetary gear set;
- Natural frequency;
- Modal shape;
19.DESIGN OF REAL-TIME MONITOR FOR TURBINE PRINCIPAL AXIS AND SINGULARITY DETECTION WITH WAVELET

机译：汽轮机主轴实时监控器设计及小波奇异检测
- 作者：Wang Yuangan;Yu Honglin;Wu Yongfeng
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Torque measurement;
- Grating sensor;
- Wavelet transform;
- Singularity detection;
- Norm's maximum;
20.ANALYSIS AND RESEARCH ON PRESSURE VARIATION REGULARITY OF HYDRAULIC-DRIVEN RECIPROCATING PUMP

机译：液压往复泵的压力变化规律分析与研究
- 作者：Wang Xinhua;Liu Shiqiang;Qi Mingxia
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Hydraulic-driven;
- Reciprocating pump;
- Suction pressure;
- Head pressure;
- Variation regularity;
21.DEVELOPMENT OF SHAFT DRIVE CONTINUOULY VARIABLE TRANSMISSION

机译：轴驱动连续变速传动的发展
- 作者：Masashi Yamanaka;Yukihito Narita;Katsumi Inoue
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Transmission;
- CVT;
- Traction Drive;
- Efficiency;
- Ratio Change;
22.GEAR TOOTH ERROR CAUSED BY HOB MISALIGNMENT

机译：齿轮误动引起的齿轮齿错误
- 作者：Yasuaki Hiroo;Isao Sakuragi;Yosimasa Kunitake;Kosuchon SATAYOTIN
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Involute gear;
- Hobbing;
- Tooth profile error;
23.RESEARCH AND APPLICATION OF SELF-COMPENSATION FLEXIBLE DRIVE IN THE DRIVE SYSTEM DESIGN OF TRIPLE-CAR DUMPER

机译：自补偿柔性驱动器在三轮汽车自卸车驱动系统设计中的研究与应用
- 作者：Jin Herong;Zheng Dezhong
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Self-compensation;
- Flexible drive;
- Three-car dumper;
- Dual drive;
- Engagement;
24.NC MACHINING SIMULATION FOR THE WORM-WHEEL HOB-CUTTER IN DOUBLE PLANE ENVELOPING TOROIDAL WORM DRIVE

机译：双曲面蜗杆蜗杆传动中蜗轮滚刀的数控加工模拟
- 作者：Liao Zhigang;Yao Ligang;Cai Yingjie;Dai Jiansheng
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Toroidal drive system;
- Hob-cutter;
- Simulation;
- NC machining;
25.RELATION BETWEEN CHANGED HARDNESS AND SURFACE DURABILITY IN THE ROLLING-SLIDING CONTACT OF DEVELOPED CASE-CARBURIZED ALLOY STEELS

机译：硬质合金化硬质合金钢的滚动-滑动接触中硬度变化与表面耐久性之间的关系
- 作者：Tsutomu Nakanishi;Daniel Tilahun Redda;Gang Deng
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear;
- Roller;
- Case-carburized alloy steed;
- Hardness;
- Surface durability;
26.PARAMETER MODELING AND FINITE ELEMENT CONTACT ANALYSIS OF LARGE-SCALE MARINE HERRINGBONE GEARS PAIR

机译：大型人字齿轮对的参数建模与有限元联系分析
- 作者：Yan Guoping;Liu Zhenglin;Hu Shelai;Zhu Hanhua;Zhou Jianhui
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Herringbone gear;
- Contact analysis;
- Dynamic meshing;
- Instantaneous impact;
- Finite element method;
27.EFFECTS OF CARBURIZED PART, HELIX ANGLE AND FACE WIDTH ON RESIDUAL STRESSES OF CASE-CARBURIZED HELICAL GEARS

机译：渗碳部分，螺旋角和端面宽度对齿轮渗碳螺旋齿轮残余应力的影响
- 作者：Kouitsu Miyachika;Weidong Xue;Takao Koide;Satoshi Oda
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Helical gear;
- Residual stress;
- Case-carburizing;
- Elastic-plastic stress analysis;
- 3D-FEM;
28.METHODICAL POWERTRAIN VALIDATION WITH BEHAVIOURAL MOCK UPS

机译：行为模拟UPS进行系统的动力传动系统验证
- 作者：Albert Albers;Tobias Düser;Christian Schyr
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Vehicle development;
- Validation;
- Testing;
- Element model;
- Simulation;
29.SIMPLIFIED MODEL FOR DEFORMATION OF GEAR TOOTH AND MESHING SIMULATION

机译：齿轮齿形变形和网状模拟的简化模型
- 作者：Hidehiro Yoshino;Fumihiro Ohshima
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear tooth deformation simplified model;
- Transmission error;
- Tooth contact;
- Meshing simulation FEM analysis;
30.BANDSAW AND POWER TRANSMISSION DYNAMICS SIMULATION

机译：带锯和功率传输动力学仿真
- 作者：Heikki Martikka;Kalle Saastamoinen;M.Sc Wang Yongbo;Liu Yonggang;M.Sc Tero P?ll?nen
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Dynamics simulation;
- Bandsaws;
- Moving bands;
31.DYNAMIC CONTACT SIMULATION ANALYSIS OF HYPOID GEAR

机译：双曲面齿轮的动态接触仿真分析
- 作者：Xie Gang;Ma Xuejie;Wang Xiaolin
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Hypoid gear;
- Dynamic contact;
- Contact simulation;
- Rigid-plastic FEM;
32.CHARACTERISTIC OF QUENCHING REFRIGERANT FOR HEAT TREATNENT DEFORMATION CONTROL OF SM45C STEEL

机译：SM45C钢热变形控制淬火剂的特性。
- 作者：Lu Long;Sungki Lyu;Huibo He;Minju Ahn;Yuson Son
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Heat-treatment deformation;
- Quenching refrigerant;
- Conditions of quenching;
- Fatigue strength;
33.SHIFT PERFORMANCE CONTROL FOR MILD HYBRID ELECTRIC VEHICLE EQUIPPED WITH AUTOMATIC MANUAL TRANSMISSION

机译：配备自动手动变速箱的轻型混合动力汽车的换档性能控制
- 作者：Ye Ming;Qin Datong;Liu Zhenjun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Shift performance;
- Automatic manual transmission;
- Engine speed control;
- ISG motor;
34.IMPROVED WAVELET NEURAL NETWORK AND ITS APPLICATION IN DYNAMIC OPTIMAL DESIGN OF BEVOLOID GEAR RV REDUCER

机译：改进的小波神经网络及其在齿轮减速器动态优化设计中的应用
- 作者：Yu Guangbin;Li Guixian;Wu Junfei;Wang Yanfei
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Improved wavelet neural network;
- RV reducer;
- Dynamic optimization;
35.RESEARCH ON PRINCIPLE OF QUASI GAS POWER CYCLE FOR POWER MEMS

机译：功率MEMS准气动力循环原理研究。
- 作者：Zhang Li;Chen Weijun;Deng Daqiang;Xu Zongjun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Power MEMS;
- Micro heat engine;
- Gas power cycle;
- Rotary engine;
36.DETERMINING PROTEIN STRUCTURE SIMILARITY BASED ON ROBOT TECHNIQUES

机译：基于机器人技术的蛋白质结构相似性测定
- 作者：Feng Haitao;Cui Junwen;Hang Lubin
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Protein;
- Structure similarity;
- Writhing number;
- Knot theory;
- Unit quaternion;
37.SYNTHESIS AND ANALYSIS OF PARALLEL-ROBOT BASED FLEXIBLE FIXTURE FOR AUTOMOBILE BODY ASSEMBLY

机译：基于并行机器人的汽车车身柔性夹具的合成与分析
- 作者：Yu Hongjian;Li Bing;Yang Xiaojun;Dai Jiansheng
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Flexible fixture;
- Inverse singularity;
- Theory of screws;
- Dexterity;
38.MESHING CONTROL OF CYCLOID GEAR WITH HIGH PRECISION IN MECHANICAL MOVEMENT

机译：机械运动中高精度的摆线齿轮的啮合控制
- 作者：Xu Wujiao;Qin Datong;Fu Yu;R.Du
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Cycloid gear;
- Loaded tooth contact analysis;
- Tooth profile modification;
- Meshing control;
39.VARIATION ANALYSIS FOR FLEXIBLE SHEET METAL ASSEMBLY WITH PRINCIPAL COMPONENT ANALYSIS APPROACH

机译：柔性板金属组件的主成分分析法变异分析。
- 作者：Li Bing;Ran Tao;HuYing
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Sheet Metal Assembly;
- Principal Component Analysis;
- Finite Element Analysis;
40.STUDY ON THE NONLINEAR VIBRATION CHARACTER OF THE SPIRAL BEVEL AND HYPOID GEARS TRANSMISSION SYSTEM

机译：螺旋锥齿轮和双曲面齿轮传动系统的非线性振动特性研究
- 作者：Wang Lihua;Huang Yayu;Li Runfang;Lin Tengjiao
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Spiral bevel gear;
- Concentrated parameter;
- Dynamic response;
- Nonlinear vibration;
41.ROBOT’S CONTROL PROGRAM DESIGN BASED ON STATE TRANSITION METHED

机译：基于状态转换方法的机器人控制程序设计
- 作者：Wang Mingshun;He Lihong;Chen Shuping
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Robot;
- State transition;
- Finite state machine;
- Manipulator;
- Control program design;
42.SCRATCHING OF TOOTH FLANK OF HOBBED GEARS DUE TO CHIP CRUSH IN CUTTING EDGE CLEARANCE

机译：切削边缘间隙时由于碎屑造成的滚齿齿轮齿面的刮擦
- 作者：Masaharu Komori;Aizoh Kubo;Masaoki Sumi;Masataka Yonekura;Ryo Egami
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear;
- Cutting;
- Chip;
- Hobbing;
- Dry Cutting;
- Scratch;
- Clearance;
- Simulation;
43.INFLUENCE OF GEAR ECCENTRICITY ON THE CHARACTERISTICS OF NOISE SPECTRUM–FREQUENCY MODULATION AND SIDEBANDS OF MESH FREQUENCY

机译：齿轮的偏心度对噪声谱-频率调制和网格频率旁带特征的影响
- 作者：Syuhei Kurokawa;Yasutsune Ariura
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear;
- Transmission error;
- Eccentricity;
- Noise emission;
- Spectrum;
- Frequency modulation;
44.OPTIMIZATION DESIGN OF DOUBLE CRANK RING-PLATE-TYPE PIN-CYCLOID-GEAR PLANETARY DRIVE

机译：双曲柄环板式销钉-圆柱齿轮行星传动的优化设计
- 作者：He Weidong;Li Lixing;Li Xin;Linda Schmidt
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
45.DEVELOPMENT OF HIGH PERFORMANCE HELICAL GEAR FOR AUTOMOTIVE TRANSMISSION

机译：高性能传动用螺旋齿轮的研制。
- 作者：Kohei Saiki;Yoshikazu Miyoshi;Takeshi Watanabe
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Helical gear;
- High strength;
- Low noise;
- Teeth number;
- Ease-off;
- Optimization;
- Design system;
46.HIGH PRECISION REFERENCE ARTIFACT FOR GEAR CHECKER CALIBRATION

机译：齿轮校验器校准的高精度参考工件
- 作者：Aizoh Kubo;Masaharu Komori;Koshi Kondo;Toshiyuki Takatsuji;Sonko Osawa
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear checker;
- Calibration;
- Artifact;
- Ball artifact;
- Wedge artifact;
- Ball-wedge artifact;
47.DYNAMIC SIMULATION OF PLANETARY GEAR SYSTEM BASED ON BOND GRAPH THEORY

机译：基于键合图理论的行星齿轮系统动力学仿真
- 作者：Li Runfang;Wang Jianhui;Yuan Min;Lam K.T.
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Planetary gear transmission;
- Dynamic simulation;
- Bond graph;
- State equation;
- Graph representation;
48.HEAT FLOW IN V-BELTS

机译：三角皮带的热流
- 作者：Frank H. Schaefer
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Heat flow;
- V-Belts;
- Power loss;
49.EFFECT OF THE DEGREE OF UNIFORM B-SPINE ON DYNAMICAL OPTIMIZATION OF CAM CURVES

机译：均匀B型脊柱的度对CAM曲线动力学优化的影响
- 作者：Lin Changjun;Qiu Hua;Hiroaki Ozaki;Lin Chao
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Cam curve design;
- Dynamical optimization;
- Uniform B-spline;
- Indexing cam mechanism;
50.HYPOCYCLOID DRIVE

机译：液力传动
- 作者：Zhou Xiaoting
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Hypocycloid;
- Curtate hypocycloid;
- Pinhole output mechanism;
- Array output shaft;
51.RESEARCH OF PLANETARY STEPLESS TRANSMISSION WITH RING CONES FOR EXCITER OF VIBRATIONAL FIRE GRATE

机译：环型激振器带环锥面无级变速器的研究
- 作者：Xiong Binsheng;Chen Jiangyi;Wu Xiaoling;Xiong Anran;Cui Xiaokang
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
52.OPTIMIZATION MODEL OF CHARGE MOTION IN TUMBLING BALL MILLS

机译：摆球铣削中电荷运动的优化模型
- 作者：Shi Duanwei;Hu Guoming
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Comminution;
- Tumbling ball mill;
- Model;
- Optimization;
53.EQUIPMENT SHARING AND PLANNING IN NETWORK-BASED MANUFACTURING

机译：基于网络的制造中的设备共享和计划
- 作者：Cao Le;Liu Fei
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Networked manufacturing;
- Equipment sharing;
- Linear programming;
54.THERMAL ANALYSIS AND OPTIMIZTION ON STEEL-WORM WHEEL WITH THE COATING

机译：带涂层的钢制蜗轮的热分析和优化
- 作者：Shi Wankai;Qin Datong;Zhang Qingwei
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Worm gear;
- Coating;
- Thermal analysis;
- Optimization;
- Bulk temperature;
55.NUMERICAL SIMULATION AND EXPERIMENTAL RESEARCH ON THE VIBRATION, SHOCK AND NOISE OF GEAR SYSTEM

机译：齿轮系统振动，冲击与噪声的数值模拟与实验研究
- 作者：Lin Tengjiao;Li Runfang;Liu Wen;Du Xuesong;Jiang Renke
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear system;
- Dynamic analyses;
- Structure noise;
- Finite element method;
56.INVESTIGATION OF POWER MATCHING OF HYDRAULIC SYSTEM WITH ELECTRIC PUMP IN CONTINUOUSLY VARIABLE TRANSMISSION

机译：连续变速输电泵液压系统功率匹配的研究
- 作者：Yang Yang;Qin Datong;Yang Yalian
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- CVT;
- Hydraulic system;
- Power matching;
- Electric pump;
- Modeling and simulation;
57.FATIGUE STRENGTH OF SINTERED AND POWDER-FORGED GEARS WITH DIFFERENT GREEN DENSITY AND NICKEL CONTENT

机译：具有不同绿色密度和镍含量的烧结和粉末锻造齿轮的疲劳强度
- 作者：Akira Yoshida;Masanori Seki;Yuji Ohue;Masaaki Sato
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear;
- Sintering;
- Powder forging;
- Fatigue strength;
- Contact stress;
58.INFLUENCE FACTORS OF MATCHING CONTROL ON THE CAR WITH CONTINUOUSLY VARIABLE TRANSMISSION SYSTEM

机译：连续变速传动系统汽车匹配控制的影响因素
- 作者：Sun Dongye;Qin Datong;Hu Jianjun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Car;
- Continuously variable transmission;
- Matching method;
- Control strategy;
59.SCOPE-EXTENT OF VALIDITY OF RULES

机译：规则有效性的范围
- 作者：Aizoh Kubo
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- MOT;
- Simulation;
- Gear;
- Bearing;
- Pitting;
- Flaking;
- Edge contact;
60.FINITE ELEMENT ANALYSIS OF INTERNAL EXCITATION AND STRUCTURE BORNE NOISE IN GEARED SYSTEM

机译：齿轮系统内部激励与结构固有噪声的有限元分析
- 作者：Liu Wen;Li Runfang;Lin Tengjiao;Lü Hesheng;Xie Yongchun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Finite element method;
- Internal excitation;
- Dynamic analyses;
- Structure borne noise;
61.CONSTRAINTS IN MACHINERY AND SELF-ADAPTIVE MECHANISM

机译：机械和自适应机制的约束
- 作者：Luo Jinliang;Huang Maolin;Wen Qun Qun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Machinery;
- Constraint;
- Variable constraint;
- Self-adaptive mechanism;
62.THE DESIGN OF AUTOMOBILE GEARBOX COMPREHENSIVE TEST BED WITH MACHINE ENERGY RETURN

机译：具有机械能返回的汽车变速箱综合试验台的设计
- 作者：Lv Xiafu;Gao Yuehua;Cai Ping;Yu Xiaoli;Zhou Qiusha
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Automobile gearbox;
- Performance test bed;
- Machine energy return;
63.RESEARCH ON THE IMPACT OF CORNER CONTACT OF SPUR TRANSMISSION

机译：角传输对角接触的影响研究
- 作者：Zhou Changjiang;Tang Jinyuan;Han Xu;Wu Changde
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Spur transmission;
- Corner contact;
- Calculi;
- Finite element method (FEM);
64.STUDYING THE DYNAMIC DEFINITION METHOD OF QUALITY MANAGEMENT BUSINESS PROCESS BASED ON WORKFLOW TECHNOLOGY

机译：基于工作流技术的质量管理业务流程动态定义方法研究
- 作者：Cai Zhangli;Yi Shuping;Xiong Shiquan
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Workflow;
- Quality management;
- Business process;
- Dynamic definition;
65.FE SIMULATION OF MESHING MECHANISM PROPERTIES OF PLASTIC GEARS

机译：塑料齿轮啮合机制的有限元模拟
- 作者：J Wang;I Howard;D Walton
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Non-metallic gears;
- Nylon PA6;
- FEA;
- Combined torsional mesh stiffness;
- Load sharing ratio;
66.COMPREHENSIVE ANALYSIS OF SPUR GEARS IN MESH WITH VARIOUS TYPE PROFILE MODIFICATIONS

机译：各种类型轮廓修改的网眼中毛刺齿轮的综合分析
- 作者：J Wang;I Howard
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gear;
- Tip relief;
- Profile modification;
- Rigid body motion;
- FEA;
- Meshing;
67.DEVELOPMENT PROSPECT OF SOLID LUBRICATING TECHNOLOGY APPLIED IN SPACE MECHANISMS OF HIGH RELIABILITY

机译：固体润滑技术在高可靠空间机理中的应用前景
- 作者：Wang Jiaxu;Xiao Ke;Zhang Baolei;Tang Feng
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Space environment;
- Space mechanism;
- Chemical vapor deposition;
- Physical vapor deposition;
- Magnetron sputter;
- Laser treatment;
68.STANDING START CONTROL FOR VEHICLE WITH AUTOMATIC MANUAL TRANSMISSIONS

机译：带有自动手动变速箱的汽车起步控制
- 作者：Liu Zhenjun;Qin Datong;Amir Ibrahim A.
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Standing start control;
- AMT;
- dSPACE;
69.FEATURE MODELING CONSTRAINT-BASED FOR COLLABORATIVE DESIGN

机译：基于特征建模约束的协同设计
- 作者：Luo Tianhong;Chen Xiaoan;Luo Wenjun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Collaborative design;
- Feature modeling;
- Constraint-based;
70.STUDY ON MULTI-OBJECTIVE OPTIMIZATION OF THE MECHANICAL STRUCTURE BASED ON THE RBFNN AND THE PARETO GA

机译：基于RBFNN和Pareto GA的机械结构多目标优化研究
- 作者：Liu Qian;Shi Weijia;Wang Jingang;Tai Xiaohong
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Radial based function;
- Multi-objective optimization;
- Genetic algorithm;
71.STUDY ON OIL FILM CAPABILITY OF HYBRID HYDRODYNAMIC JOURNAL BEARING BASED ON MATLAB

机译：基于MATLAB的混合动力滑动轴承油膜性能研究。
- 作者：Jiang Guiyun;Wang Yongqing;Yan Xinchun;Zhang Yunfei
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Hybrid hydrodynamic journal bearing;
- Oil film capacity;
- Numerical value method;
- Simulation;
- MATLAB;
72.STUDY ON INNOVATIVE SYNTHESIS OF EPICYCLIC GEAR TRAINS WITH MULTI-DEGREES OF FREEDOM

机译：具有多种自由度的大齿轮齿轮创新合成方法的研究
- 作者：Ren Hengbin;Qin Wei;Huang Maolin;Du Li
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Epicyclic Gear Trains;
- Innovative synthesis;
- Degrees of freedom;
73.STUDY AND DESIGN ON NEW TYPE MAGNETO-RHEOLOGICAL FLUID CLUTCH

机译：新型磁流变液离合器的研究与设计
- 作者：Jiang Jiandong;Zhao Yingdi;Liang Xichang
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Magnetorheological fluid;
- MRT FEA;
74.RESEARCH METHOD FOR LUBRICATED MULTI-DISC CLUTCHES

机译：润滑多盘离合器的研究方法
- 作者：Albert Albers;Johannes Bernhardt;Sascha Ott
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Multi-disc clutch;
- Permanent slip;
- Friction system;
- Chatter;
- Research-method;
- Heat dissipation;
- Power density;
75.AN EXPERIMENTAL STUDY ON THE REMOVAL GAS ENGINE EXHAUST BY LOW TEMPERATURE PLASMA TECHNOLOGY

机译：低温等离子技术去除发动机废气的实验研究
- 作者：Ran Zhenya;Xia Gang
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Low temperature plasma;
- Engine Exhaust;
76.OPTIMAL DESIGN FOR THE CYCLOID DRIVE OF FA SERIES BASED ON GENETIC ALGORITHM

机译：基于遗传算法的FA系列摆线驱动的优化设计
- 作者：Lei Lei;Guan Tianmin;Shi Xiaochun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- The cycloid drive of FA series;
- Genetic algorithm;
- Optimal design;
77.STUDY AND DEVELOPMENT OF DOUBLE TRACK TYPE FLEXIBLE DRIVING WITH MULTI-CHANNEL ENGAGING

机译：多通道啮合双轨式柔性驱动的研究与开发
- 作者：He Yuancheng;Feng Yanbin;Zheng Ziqiu;Qin Datong
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Flexible driving with multi-channel engaging;
- Double track type;
- Gear;
- Study and development;
78.NUMERICAL IMITATION OF FATIGUE LIFE FOR MILITARY TRACKED VEHICLE TORSION BAR

机译：履带车辆扭力杆疲劳寿命的数值模拟
- 作者：Rui Qiang;Wang Hongyan
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Military tracked vehicle;
- Fatigue life;
- Numerical imitation;
- Adams;
- Nastran;
79.ANALYSIS AND CALCULATION ON ELASTO-HYDRODYNAMIC LUBRICATION OF INVOLUTE GEAR TRANSMISSION WITH THE UNSYMMETRIC TEETH PROFILE AND DOUBLE PRESSURE ANGLES

机译：非对称齿形和双压力角的渐开线齿轮传动的弹性-水力润滑分析与计算
- 作者：Li Wei;Liu Yanjun;Meng Huirong
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Double pressure angles;
- Asymmetric teeth profile;
- Involute gear transmission;
- Elasto-hydrodynamic;
- Lubrication;
- Oil-film thicknes;
80.INTEGRATING AXIOMATIC DESIGN AND TRIZ TO SOLVE DESIGN PROBLEMS

机译：集成公理设计和TRIZ解决设计问题
- 作者：Zhang Lujun
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Axiomatic design;
- TRIZ;
- Integration;
81.DEVELOPMENT AND APPLICATION OF THE INTELLIGENT FAULT DIAGNOSIS SYSTEM BASED KBE GRAPH

机译：基于KBE图的智能故障诊断系统的开发与应用
- 作者：Tang Qian;Fan Qun;Zhu Caichao;Zhang Jin
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- KBE;
- Graph;
- Fault;
- Intelligent diagnosis;
82.STUDY ON THE RAPID PROTOTYPING MANUFACTURING TECHNIQUE OF THE VEHICLE BODY HULL

机译：车身的快速原型制造技术研究。
- 作者：Shi Jinfa;Zhou Yuhui
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- The vehicle body hull;
- The rapid prototyping manufacturing;
- Robot;
- Spraying to coat;
83.NC MILLING TOOL PATH GENERATION OF FREE-FORM SURFACE WITH POLAR PROJECTION METHOD

机译：极性投影法生成自由曲面的数控铣削刀具轨迹
- 作者：He Qing;Gui Guisheng;Cang Gonglin
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Polar projection method;
- Free-form surface;
- NC milling;
84.DETECTION OF GEARBOX DETERIORATION USING HYPOTHESIS TEST-ASSISTED AUTOREGRESSIVE MODELING

机译：假设假设测试辅助的自动回归模型检测齿轮箱的变形
- 作者：Shao Yimin;Yimin Zhan;Chris K. Mechefske
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Gearbox;
- Condition detection;
- Hypothesis test;
- Autoregressive modeling;
85.SCM-ORIENTED ENTERPRISE INFORMATION SYSTEM INTEGRATION TECHNOLOGY AND APPLICATION

机译：面向SCM的企业信息系统集成技术与应用
- 作者：Deng Lei;Wang Xu;Xie Xinling
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Supply chain management(SCM);
- Enterprise application integration(EAI);
- Integration;
86.PERFORMANCE ANALYSIS OF THE ASYMMETRIC TOOTHED CHAIN

机译：不对称链的性能分析
- 作者：Tian Bo;Liang Xichang;Pan Jisheng
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Chain drive;
- Toothed chain;
- Asymmetric;
87.NEW KIND OF HYDRAULIC MOTOR WITH SWINGING PLANETARY DRIVE OF BEVEL GEARS AND ITS APPLICATION IN CAPSTAN

机译：摆动齿轮行星齿轮传动的新型液压马达及其在CAPSTAN中的应用
- 作者：Liu Huran;Liu Quanhong;Zhao Dongfu;Song Deyu;Wang Yong gang;C.Y. Chan
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
88.FINITE ELEMENT ANALYSIS ON THE OUTPUT MECHANISM WITH PIN-HOLES OF CYCLOIDAL SPEED REDUCER

机译：摆线减速器针孔输出机制的有限元分析
- 作者：Wang Shuyan;Chen Bingkui
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Cycloidal speed reducer;
- Load capacity;
- Finite element method;
89.THE APPLICATION OF DYNAMIC OPTIMIZATION METHOD TO AUTOMOBILE SHOCK ABSORPTION TWIST BAR SPRING DESIGN

机译：动态优化方法在汽车减震扭杆弹簧设计中的应用
- 作者：Song Guiqiu;Zhou Jing
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Optimization;
- Integrated design method;
- Dynamic design;
- Double goal optimization;
- Automobile twist bar spring;
90.SIMULATION ON FRICTION COMPENSATION FOR THE PNEUMATIC PROPORTIONAL SYSTEM

机译：气动比例系统的摩擦补偿模拟
- 作者：Liu Yanjun;Kong Xiangzhen;Wang Yong
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Valve-controlled cylinder;
- Friction compensating;
- NNC;
- Vibrating signal;
91.DYNAMIC ANALYSIS TO THE REVOLVING MECHANISM BASIS ON THE METHOD OF EQUIVALENT FINITE ELEMENT

机译：等效有限元法的旋转机构动力学分析
- 作者：Che Renwei;Lu Nianli;Xue Yuan
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Revolving mechanism;
- Dynamic analysis;
- EFEM;
- Finite Element;
- Equivalent system;
- Geared system1;
92.NEW PROCESS DEVELOPMENT OF THRUST CONE BASED ON SIMULATION TECHNOLOGY

机译：基于仿真技术的止推锥新工艺开发
- 作者：Wang Menghana;Zhou Jie;Li Wenxiang
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Thrust cone;
- Simulation;
- Forging;
- Wall difference;
93.PRINCIPLE AND QUALITY ANALYSIS ON NO-CHIP COLD-ROLLING MANUFACTURING HARMONIC GEAR

机译：无芯片冷轧谐波齿轮的原理和质量分析
- 作者：Yang Xianghong;Lin Shuzhong;Sun Huilai;Qi Xiangyang
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Harmonic gear;
- No-chip cold-rolling manufacturing;
- Principle and quality analysis;
94.THE PERIODIC SOLUTION AND STABILITY ANALYSIS OF NONLINEAR GEAR SYSTEM WITH CLEARANCE

机译：具有间隙的非线性齿轮系统的周期解和稳定性分析
- 作者：Yang Huadong;Zhang Xia;Yang Xiaohong;Fan Xiaoliang
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Nonlinear with clearance;
- Incremental harmonic balance method;
- Periodic solution Stability;
95.RESEARCH ON TRANSMISSION SYSTENS OF MSW MANAGEMENT EQUIPMENT BASING ON VIRTUAL PROTOTYPING

机译：基于虚拟样机的城市生活垃圾管理设备传输系统研究
- 作者：Lv Chuanyi;Yang Xianhai
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- MSW management equipment;
- Virtual prototyping;
- Transmission system;
- Rotary lifting device;
96.THEORETICAL RESEARCH AND PARAMETER OPTIMIZATION ON THE PLANETARY RINGY GEAR TRANSMISSION

机译：行星环形齿轮传动的理论研究与参数优化
- 作者：Xiang Zhongfan;Wang Jinge
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Mechanical transmission;
- Planetary gear train;
- Pumping system;
97.SOLVING COMPLEX OPTIMIZATION PROBLEMS USING IMPROVED PARTICLE SWARM OPTIMIZER

机译：使用改进的粒子群优化器解决复杂的优化问题
- 作者：Lei Kaiyou;Qiu Yuhui;Wang Xuefei
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- NP-hard problem;
- Particle swarm optimization;
- Inertia weight;
- Premature problem;
98.RESEARCH ON THE JOINT PARAMETERS IDENTIFICATION OF SPINDLE SYSTEM OF HORIZONTAL BORING MACHINE

机译：水平镗床主轴系统联合参数识别的研究
- 作者：Han Xi;Zhong Li
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Horizontal boring machine;
- Spindle system;
- Modeling;
- Joint;
- Parameters identification;
99.STUDY ON EXPLOSIVE ORDNANCE DISPOSAL ROBOT MOVING IN CLUTTERED TERRAIN AND STABILITY ANALYSIS OF THE EXPLOSIVE

机译：杂乱地区爆炸物和军械处置机器人的研究及爆炸物的稳定性分析
- 作者：Mo Haijun;Huang Ping;Zhu Wenjian
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Explosive ordnance disposal robot;
- Explosive;
- Vibration;
- Stability;
100.DEVELOPMENT OF THE ROTARY TABLE TORSION TESTING SYSTEM USED IN CASING DRILLING

机译：套管钻井转盘扭转测试系统的开发
- 作者：Yan Wenhui;Nan Shuqi;Peng Yong
- 会议名称：《Proceedings of the International Conference on Mechanical Transmissions (ICMT'2006)》 | 2006年
- Casing drilling;
- Torsion testing;
- Rotary table;