首页>外文会议>International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC

International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC

召开年：1997
召开地：Portland, OR(US);Portland, OR(US);Portland, OR(US);Portland, OR(US)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.INSULATION FOR WIND AND REACT HIGH TEMPERATURE SUPERCONDUCTING COILS

机译：风和反应高温超导线圈的绝缘
- 作者：I. H. Mutlu;Y. S. Hascicek
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
2.MECHANICAL PROPERTIES OF ZIRCONIA AND SILICA AT CRYOGENIC TEMPERATURE

机译：低温下氧化锆和二氧化硅的力学性能
- 作者：S. Ucno;S. Nishijima;A. Nakahira;K. Kijima;H. Ejima;T. Okada
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
3.THERMAL CONDUCTIVITY OF SINTERED NICKEL FILMS OBTAINED WITH THE HVOF TECHNIQUE

机译：HVOF技术获得的烧结镍膜的热导率
- 作者：F.Pavese;D.Ferri;D.Giraudi;M. Vanolo
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
4.DETERMINING THE AMOUNT OF 8-MARTENSITE DURING LOW-TEMPERATURE DEFORMATION BY A RESISTOMETRIC TECHNIQUE

机译：用电阻法测定8马氏体的低温变形量
- 作者：M. M. Chernik;L. V. Skibina
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
5.THE INTERLAMINAR SHEAR STRENGTH OF FRPs UNDER THE INFLUENCE OF VARIOUS RADIATION SOURCES

机译：各种辐射源影响下FRP的层间剪切强度
- 作者：S.M. Spiessberger;K. Humer;H. W. Weber;E. K. Tschegg;H. Gerstenberg;A. Udagawa
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
6.TESTS OF FILL FIBERS AND EPOXY RESINS FOR THE FABRICATION OF IMPREGNATED SUPERCONDUCTING SOLENOIDS

机译：填充纤维和环氧树脂用于浸渍超导电磁阀制备的测试
- 作者：M. A. Green;S. K. Mukherjee;S. M. Dardin;J. W. ONeill;R. E. Marrs;E. Magee
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
7.A COMPOSITE ELECTRICAL INSULATION IN SUPERCONDUCTING MAGNETS

机译：超导磁体中的复合电绝缘
- 作者：A. Yamamoto;T. Ueki;H. Mukai;S. Hosaka;Y. Toda;Y. Makida;S. Mine;K. Makishima
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
8.MOLECULAR DYNAMIC SIMULATION OF POLYMERIC MATERIALS AT CRYOGENIC TEMPERATURE

机译：高分子材料在低温下的分子动力学模拟
- 作者：S.Nishijima;T.Nishiura;T.Okada
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
9.LOW-TEMPERATURE THERMAL, DIELECTRIC, AND ACOUSTIC PROPERTIES OF AMORPHOUS POLYMERS

机译：非晶态聚合物的低温热，介电和声学性质
- 作者：M. Jaeckel;F.V. Schoenebeck;T. Eggert;G. Koebernik;U. Escher;B. Kluge;A. Gladun
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
10.PLASMA TREATMENT OF COMPOSITE INTERFACE FOR CRYOGENIC USE

机译：等离子体处理复合界面的低温处理
- 作者：T. Yagi;S. Ueno;S. Nishijima;T. Okada
- 会议名称：《》 | 1998年
11.TOUGHENING OF EPOXY RESIN SYSTEMS FOR CRYOGENIC USE

机译：低温用环氧树脂体系的增韧
- 作者：T. Ueki;K. Nojima;K. Asano;S. Nishijima;T. Okada
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
12.ENHANCED CREEP OF EPOXY RESIN DURING IRRADIATION AT CRYOGENIC TEMPERATURES

机译：低温下辐照过程中环氧树脂的增强蠕变
- 作者：T. Nishiura;S. Nishijima;S. Ueno;Y. Tsukasaki;T. Okada
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
13.AVOIDANCE METHOD STUDY FOR SAGBO CRACKING DURING HEAT TREATMENT OF A ITER CS MODEL COIL CONDUCTOR USING INCOLOY 908 JACKET

机译：用INCOLOY 908护套对It CS模型线圈导体进行热处理时SAGBO开裂的避免方法研究
- 作者：T. Kato;K. Hamada;K. Yamamoto;I. Watanabe;K. Ishio;T. Ando;H. Tsuji;T. Abe;K. Kikuchi;N. Minakawa;M. Tsuchiya;M. Tsubota;Y. Katayama;S. Ikeda;H. Ogata;T. Fujioka;A. Osaki
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
14.NON-EQUILIBRIUM SEGREGATION OF MANGANESE IN HIGH-Mn CRYOGENIC STEELS

机译：高锰低温钢中锰的非平衡偏析
- 作者：D. Y. Sun;K. S. Xue;Z. R. Xu;B. Wang;J. J. Zhang;J. F. Yi;W. Wang
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
15.LOW-TEMPERATURE PLASTIC DEFORMATION AND RESISTIVITY OF COARSE-GRAIN PURE ALUMINUM

机译：粗粒纯铝的低温塑性变形和电阻率
- 作者：S.E. Demyanov;M.L. Petrovskii;A.V. Petrov;S.P. Zakatov
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
16.THERMAL CONTRACTION COEFFICIENT MEASUREMENT TECHNIQUE OF SEVERAL MATERIALS AT LOW TEMPERATURES USING ELECTRONIC SPECKLE PATTERN INTERFEROMETRY

机译：电子散斑图样干涉法对几种材料的热收缩系数测量技术
- 作者：S. Nakahara;S. Nishida;S. Hisada;T. Fujita
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
17.LOW TEMPERATURE TENSILE AND SHEAR/ TENSION PROPERTIES OF COMPOSITE MATERIALS WITH ELECTRICALLY INSULATING BARRIER FILMS

机译：带电绝缘阻挡膜的复合材料的低温拉伸和剪切/拉伸性能
- 作者：D. E. Baynham;D. Evans;S. J. Gamage;D. Morrow;S. J. Robertson
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
18.AEROGEL-BASED CRYOGENIC SUPERINSULATION

机译：基于气凝胶的低温绝热
- 作者：J.E. Fesmire;S. Rouanet;J. Ryu
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
19.FREE VOLUME AND CRYOGENIC PROPERTIES OF HYBRID MATERIALS

机译：混合材料的自由体积和致冷性能
- 作者：T. Okada;S. Nishijima;S. Ueno;Y. Honda;K. Niihara;A. Nakahira;K. Kijima
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
20.PROPERTIES OF MATERIALS FOR USE IN LIQUID HYDROGEN CONTAINMENT VESSELS

机译：液态氢容器中所用材料的特性
- 作者：S. J. Canfer;D. Evans
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
21.FAILURE CRITERION OF GLASS/EPOXY COMPOSITES USED AS ELECTRICAL INSULATION FOR LARGE SUPERCONDUCTING MAGNETS

机译：大型超导磁体用作电绝缘的玻璃/环氧树脂复合材料的破坏准则
- 作者：J.M. Rey;F. Rondeaux;B. Gallet;A. Desirelli;F. Kircher
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
22.VAMAS ROUND ROBIN TESTS ON COMPOSITE MATERIAL AND SOLDER AT LIQUID HELIUM TEMPERATURE

机译：液氦温度下在复合材料和焊料上进行的VAMAS轮循测试
- 作者：T. Ogata;D. Evans;A. Nyilas
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
23.POP-IN PHENOMENA IN AN AI-Li ALLOY

机译：AI-Li合金中的弹出现象
- 作者：A. Bussiba;H. Alush;M. Kupiec
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
24.FATIGUE-INDUCED ELECTRICAL DEGRADATION OF COMPOSITE HIGH-PURITY/HIGH-STRENGTH ALUMINUM RINGS AT 4 K

机译：高纯/高强度复合铝环在4 K时的疲劳诱导电降解
- 作者：S. L. Bray;J . W. Ekin;M. J. Nilles
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
25.OPTIMIZATION STUDIES ON HIGH-STRENGTH Ag -Cu CONDUCTORS

机译：高强度Ag-Cu导体的优化研究
- 作者：F. Heringhaus;S.O. Prestemon;G. Gottstein;H.-J. Schneider-Muntau
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
26.TIME-RESOLVED FLOW STRESS BEHAVIOR OF STRUCTURAL MATERIALS AT LOW TEMPERATURES

机译：低温下结构材料的时变流动应力行为
- 作者：B. Obst;A. Nyilas
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
27.FATIGUE CRACK GROWTH RATE OF SUS 316 AND WELD JOINT WITH NATURAL CRACK AT 7 K

机译：7 K自然裂纹下SUS 316和焊接接头的疲劳裂纹扩展速率
- 作者：A. Nishimura;J. Yamamoto;A. Nyilas
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
28.EFFECT OF AN 8 TESLA MAGNETIC FIELD ON MECHANICAL PROPERTIES OF INCOLOY 908 ALLOY AT 4K

机译：8 TESLA磁场对INCOLOY 908合金4K力学性能的影响
- 作者：T.Kadota;T.Tanaka;Y.Kohno;H.Nakajima;H.Tsuji;K.Shibata
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
29.MECHANICAL INVESTIGATIONS ON AGED STAINLESS STEEL AND INCOLOY 908 MATERIALS AT 4.2 K AND 7 K

机译：在4.2 K和7 K下对陈旧的不锈钢和Incoloy 908材料进行的机械研究
- 作者：A. Nyilas;B. Obst;D. R. Harries
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
30.LOW-TEMPERATURE TENSILE PROPERTIES OF Fe-Ni ALLOYS

机译：Fe-Ni合金的低温拉伸性能
- 作者：Richard P. Reed
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
31.NEW FAILURE PREDICTION MODEL FOR A Ni-Fe SUPERALLOY SHEATH OF SUPERCONDUCTING FUSION MAGNETS

机译：超导融合磁体的Ni-Fe超合金皮新的失效预测模型
- 作者：J. H. Kim;I. S. Hwang;R. L. Tobler
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
32.FATIGUE LIFE ESTIMATION OF ITER CONDUITS AT 4 K

机译：4 K时离子传导率的疲劳寿命估算
- 作者：J. Feng
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
33.FRACTURE TOUGHNESS AND TENSILE BEHAVIOR OF INCOLOY 908

机译：INCOLOY 908的断裂韧性和拉伸行为
- 作者：E.-H. Han;R. J. Hughes;H. Au;R. G. Ballinger;D. Grundy;P. Stahle
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
34.SELECTION OF TOKAMAK TOROIDAL FIELD COIL CASE STRUCTURAL MATERIALS

机译：托卡马克环形场线圈壳体结构材料的选择
- 作者：F.M.G. Wong;N.A. Mitchell
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
35.NONEQUILIBRIUM SEGREGATION AND FRACTURE MECHANISM OF HIGH-MANGANESE CRYOGENIC STEELS

机译：高锰深冷钢的非平衡偏析和断裂机理
- 作者：K. S. Xue;D. Y. Sun;Z. R. Xu;B. Wang;J. Li;J. Q. Shen;W. Wang
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
36.TRIAL FABRICATION OF HEAVY SECTION BASE METALS AND WELDED JOINTS FOR ITER TF COIL

机译：ITF线圈的重截面母材和焊接接头的试制
- 作者：K. Ishio;H. Nakajima;Y. Nunoya;Y. Miura;T. Kawasaki;H. Tsuji
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
37.A STUDY OF FRACTURE TOUGHNESS AND MICROSTRUCTURES IN THE WELD HEAT-AFFECTED ZONE OF QLT-PROCESSED 9 Ni STEEL

机译：QLT 9％Ni钢的焊接热影响区的断裂韧性和组织结构研究
- 作者：J. Jang;Y. Yang;W. Kim;D. Kwon
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
38.WELDING CONSUMABLE DEVELOPMENT FOR A CRYOGENIC (4 K) APPLICATION

机译：低温（4 K）应用的焊接耗材开发
- 作者：S.F. Kane;T.A. Siewert;C.N. McCowan;A.L. Farland
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
39.TECHNIQUES FOR AUTOMATIC AUTOGENOUS WELDING OF LOW SULFUR 316LN BEAM TUBE

机译：低硫316LN束流管自动自动焊接技术
- 作者：S.F. Kane;A.L. Farland
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
40.A STUDY OF MECHANICAL PROPERTIES AND WELDABILITY IN WELDMENT OF COLD-ROLLED Fe-19Mn-5.5Cr-3.5Al-0.25C ALLOY AT CRYOGENIC TEMPERATURE

机译：低温下冷轧Fe-19Mn-5.5Cr-3.5Al-0.25C合金的力学性能和焊接性研究
- 作者：Y.P.Kim;W.S.Kim;S.H.Hong
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
41.STRENGTH, DUCTILITY/TOUGHNESS AND FINE-BLANKING OF NONMAGNETIC HIGH Mn STEEL AND ITS ACCELERATOR SUPERCONDUCTING MAGNETS APPLICATION

机译：非磁性高锰钢及其加速器超导磁体的强度，延性/韧性和冲裁性应用
- 作者：K. Nohara;U. Nishiike;K. Kobayashi;T. Akita
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
42.EFFECTS OF STRESS LEVEL IN PRE-CRACKING ON FRACTURE TOUGHNESS OF SUS 304L STEEL IN AN 8 TESLA MAGNETIC FIELD AT 4K

机译：预开裂应力水平对8K TESLA磁场中SUS 304L钢断裂韧性的影响
- 作者：T.Tanaka;T.Kadota;Y.Kohno;K.Shibata
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
43.FRACTURE TOUGHNESS EVALUATION OF A ROUND BAR WITH A CIRCUMFERENTIAL NOTCH AT CRYOGENIC TEMPERATURE

机译：低温下带有缺口的圆棒的断裂韧性评估
- 作者：A. Nishimura;J. Yamamoto;A. Nyilas
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
44.FRACTURE MECHANICS INVESTIGATIONS AT 7 K OF STRUCTURAL MATERIALS WITH EDM NOTCHED ROUND AND DOUBLE EDGED - BARS

机译：带EDM缺口圆和双刃钢筋的结构材料在7 K时的断裂力学研究。
- 作者：A. Nyilas;B. Obst;A. Nishimura
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
45.CRYOMECHANICS AND DOUBLE-NOTCH INTERLAMINAR SHEAR STRENGTH OF G-10 Cr GLASS-CLOTH/EPOXY LAMINATES

机译：G-10 Cr玻璃布/环氧树脂层压板的低温力学和双点间层间剪切强度
- 作者：Y. Shindo;R. Wang;K. Horiguchi;S. Ueda
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
46.DEVELOPMENT OF U.S./ITER CS MODEL COIL TURN INSULATION

机译：美国/伊特CS模型线圈匝绝缘的开发
- 作者：Richard P. Reed;Paul E. Fabian;James B. Schutz
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
47.EFFECT OF APPLIED STRESS DURING IRRADIATION AT 5 K ON THE SHEAR / COMPRESSION STRENGTH OF BONDED SPECIMENS

机译：5 K辐照期间施加的应力对粘结试样的剪切/压缩强度的影响
- 作者：D. Evans;R. P. Reed
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
48.PROBLEMS INVOLVED IN DETERMINING THE MECHANICAL PROPERTIES OF SOLID NITROGEN AND A COMPOSITE OF SOLID NITROGEN AND ALUMINUM FOAM (40 K - 61 K)

机译：测定固氮和固氮铝泡沫复合材料（40 K-61 K）的力学性能涉及的问题
- 作者：R. C. Pederson;C. D. Miller;J. M. Arvidson;K. Blount;M. Schulze
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年
49.SIMPLE GUARDED HOT PLATE TECHNIQUE FOR MAKING THERMAL CONDUCTIVITY MEASUREMENTS OF COMPOSITE MATERIALS AT CRYOGENIC TEMPERATURES

机译：在低温下进行复合材料热导率测量的简单热板技术
- 作者：R.J. Oram;E.G. Wolff
- 会议名称：《International cryogenic materials conference;ICMC;Cryogenic engineering conference;CEC》 | 1998年