首页>外文会议>International conference on metallurgy technology and materials

International conference on metallurgy technology and materials

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Preface

机译：前言
- 作者：Nor Sabirin Mohamed
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
2.Sponsor

机译：赞助
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
3.Identification of M_6C Carbides Forming during Short-Term Creep in 11Cr-3W-3CoVNbTaNd Ferritic/Martensitic Steel

机译：11Cr-3W-3CoVNbTaNd铁素体/马氏体钢短期蠕变过程中形成的M_6C碳化物的鉴定
- 作者：Xiaoling Zhou;Yinzhong Shen;Tiantian Shi;Bo Ji;Zhiqiang Xu
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- M_6C carbide;
- Martensitic steel;
- Short-term creep;
- δ-ferrite;
- Transmission electron microscopy (TEM);
4.Characterization of Crack Growth Behavior of Carburized SCM415 Steel under Cyclic Rotating Bending

机译：循环旋转弯曲下渗碳SCM415钢裂纹扩展行为的表征
- 作者：Takahiro MATSUEDA;Kei USHIZIMA;Koshiro MIZOBE;Katsuyuki KIDA
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Crack;
- Fatigue;
- Hardness;
- Carburizing;
5.Observation of Subsurface Crack of Carburized Steel (SCM415) under Single-Ball Rolling Contact Fatigue over 10~7 Cycles

机译：10〜7次循环下单球滚动接触疲劳下渗碳钢（SCM415）表面裂纹的观察
- 作者：Masato Fukuda;Koshiro Mizobe;Katsuyuki Kida
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- rolling contact fatigue;
- SCM415;
- carburized steel;
- crack initiation;
6.Genesis Analysis of Large TiN Inclusion for High Strength Tire Cord Steel

机译：高强度轮胎帘线钢大TiN夹杂物的成因分析
- 作者：Lei Jialiu;Zhao Dongnan;Zhu Hangyu
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- tire cord steel;
- TiN inclusion;
- vacuum induction furnace;
- dissolution model;
7.Complex Saturation of Titanium Alloys with Boron, Chromium and Titanium

机译：钛合金与硼，铬和钛的复合饱和
- 作者：Guryev Alexey;Guriev Michail Alekseevich;Ivanov Sergei Gennadievich;Zheng Quan;Mei Shunqi
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- boron;
- chromium;
- titanium;
- hardening;
- boronizing;
- chemical-thermal treatment;
8.Effect of Compression Conditions on Ti-5Al-5Mo-5V-1Fe-1Cr Titanium Alloy during Isothermal Compression

机译：等温压缩过程中压缩条件对Ti-5Al-5Mo-5V-1Fe-1Cr钛合金的影响
- 作者：Sun Shuyu
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Ti-5Al-5Mo-5V-1Fe-1Cr alloy;
- Isothermal compression;
- Deformation behavior;
9.Effect of Hot Extrusion on the Flow Behaviour of a Nickel-Based P/M Superalloy

机译：热挤压对镍基粉末冶金高温合金流动行为的影响
- 作者：Jiayong Si;Songhao Liu;Long Chen
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- FGH4096 superalloy;
- Hot isostatic pressing (HIP);
- Hot extrusion;
- Flow behaviour;
- Dynamic recrystallisation;
10.Corrosion Resistance of Zn-Al-Mg Alloys with Hypoeutectic Microstructure

机译：亚共晶组织的Zn-Al-Mg合金的耐蚀性
- 作者：Guangrui Jiang;Jian Zhou;Ting Shang;Guanghui Liu
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Zn-Al-Mg alloy;
- Microstructure;
- Hypoeutectic;
- Corrosion resistance;
- Electrochemical properties;
11.Development of the Snoek Anelastic Relaxation Correlated with Oxygen in β-Ti Alloys

机译：β-Ti合金中与氧相关的Snoek弹性弛豫的研究进展
- 作者：Zheng-Cun Zhou;Jie Du;Su-Yi Gu;Yong Jian Yan
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- β-Ti alloys;
- the anelastic relaxation;
- oxygen;
12.Design and Verification of a Metal 3D Printing Device Based on Contact Resistance Heating

机译：基于接触电阻加热的金属3D打印设备的设计与验证
- 作者：Yuhua Dai;Xi Wang
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Metal 3D printing;
- Aluminum 3D printing;
- Contact resistance;
- Consumer-level 3D printing;
13.The Enhanced Ability to Withstand Axial Hot Compression of Electropulsing-Assisted Ultrasonic Surface Rolling Process Treated Inconel 718

机译：Inconel 718处理的增强的脉冲辅助超声表面滚压工艺的轴向热压缩能力
- 作者：Zhiyan Sun;Timin Hu;Shuai Ren;Bo Li
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Inconel 718;
- electropulsing;
- hot compression;
14.Wear Resistance of Steels after Diffusion Saturation of Boron, Chrome and Titanium

机译：硼，铬和钛的扩散饱和后钢的耐磨性
- 作者：Guryev Alexey;Guriev Michail Alekseevich;Ivanov Sergey Gennadievich;Zhang Yanwei;Mei Shunqi
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- boronizing;
- chromium;
- titanium;
- hardening;
- chemical-thermal treatment;
15.Process Optimization Studies of Congo Red Dye Adsorption onto Nickel Iron Layered Double Hydroxide Using Response Surface Methodology

机译：响应面法优化刚果红染料在镍铁层状双氢氧化物上的吸附工艺优化研究
- 作者：To-Uyen T. Dao;Hong-Tham T. Nguyen;Do Trung Sy;Nguyen Khoa Hien;Nguyen Anh Tien;Trung Thanh Nguyen;Trinh Duy Nguyen
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Ni-Fe LDH;
- Congo Red dye;
- adsorption;
- response surface methodology;
- optimization;
16.Manufacturing Process for Extracting Essential oils from White Pepper (Piper nigrum L.) by Hydrodistillation Technique

机译：水蒸馏技术从白胡椒中提取精油的制备方法
- 作者：Thien Hien Tran;Thi To Quyen Ngo;Thi Kim Ngan Tran;Tri Due Lam;Tan Phat Dao;Huynh Thi Kieu Linh;Thuy Trang Le Ngoc;Phan Minh Quan;Tran Quoc Toan
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Manufacturing Process;
- Essential oils;
- White pepper (Piper nigrum L.);
- Hydrodistillation technique;
17.Optimization of Microwave-Assisted Extraction Process by Response Surface Methodology of Natural Anthocyanins from Rhodomyrtus tomentosa (Ait.) Hassk

机译：响应面法优化毛绒球菌天然花色苷的微波辅助提取工艺
- 作者：Tri Nhut Priam;Huynh Thi Kieu Linh;Anh Quoc Ngo;Hoang Le Tuan Anh;Tri Duc Lam;Tran Quoc Toan
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Rhodomyrtus tomentosa (Ait.) Hassk;
- Anthocyanin;
- Extraction;
- Response surface methodology;
18.Essential oil from Vietnamese Mandarin (Citrus reticulata Blanco) Using Hydrodistillation Extraction Process and Identification of it's Components

机译：越南Mandarin加氢蒸馏提取精油及其成分鉴定
- 作者：Thien Hien Tran;Ngo Thi Cam Quyen;Huynh Thi Kieu Linh;Thuy Trang Le Ngoc;Phan Minh Quan;Tran Quoc Toan
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Citrus reticulata Blanco peel;
- hydro-distillation;
- Citrus essential oils;
- yield;
19.Process Optimization by a Response Surface Methodology for Extraction of Anthocyanins from Violet Glutinous Rice Grown in Phu Tho Province, Vietnam

机译：响应面方法优化越南富特省种植的紫糯米中花色苷的提取工艺
- 作者：Tri Nhut Pham;Huynh Thi Kieu Linh;Nguyen Thien Tao;Tri Duc Lam;Tran Quoc Toan;Anh Quoc Ngo;Mai Huynh Cang
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Process Optimization;
- Response Surface Methodology;
- Extraction;
- Anthocyanins;
- Vietnamese Violet glutinous rice;
20.A Study of Electrolysis Technology for the Removal of Nicosulfuron from Dilute Aqueous Solution

机译：电解法从稀水溶液中去除烟嘧磺隆的研究
- 作者：Mengqi Jiang;Rui Zhao;Xinli Liu
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- nicosulfuron;
- electrolysis;
- chloride ion;
21.Two-Stage Agitation Leaching of Old Flotation Tailings

机译：浮选尾矿的两阶段搅拌浸出
- 作者：Aleksandr Bulaev;Vitaliy Melamud;Anna Boduen
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- old flotation tailings;
- acid leaching;
- copper;
- zinc;
- ferric iron;
- copper-zinc sulfide concentrates;
22.Hydrothermal Synthesis of Co(OH)_2 Microspheres

机译：水热法合成Co（OH）_2微球
- 作者：Liu Mingliang;Chen Haifeng;Li Hanjun;Cai Zhengyi;Ding Jiao
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Co(OH)_2;
- Electrochemistry;
- Hydrothermal synthesis;
- Microspheres;
23.Adsorption Isotherms and Kinetic Models for Congo Red Adsorption on Ca-AI Layer Double Hydroxide Adsorbent

机译：Ca-Al层双氢氧化物吸附剂对刚果红的吸附等温线和动力学模型
- 作者：To-Uyen T. Dao;Hong-Tham T. Nguyen;Do Trung Sy;Nguyen Khoa Hien;Nguyen Anh Tien;Trung Thanh Nguyen;Trinh Duy Nguyen
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Ca-Al Layer double hydroxide;
- Congo Red dye;
- optimized conditions;
- RSM;
24.Modelling of Electrostatic Charge in Ultra-High Precision Diamond Turning of Contact Lens Polymer

机译：隐形眼镜聚合物超高精度金刚石车削中的静电荷建模
- 作者：Muhammad Mukhtar Liman;Khaled Abou-El-Hossein
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Contact lens;
- Electrostatic measurement;
- ultra-high precision turning;
- tribo-electric;
25.Effect of Cutting Parameters on Tribo-Electric Charging in the Ultra-High Precision Diamond Turning of an RGP Contact Lens Polymer

机译：RGP隐形眼镜聚合物的超高精度金刚石车削中切削参数对摩擦带电的影响
- 作者：Muhammad Liman;Khaled Abou-El-Hossein;Yuan-Chieh Cheng;Lukman Abdulkadir;Abubakar Jumare;Babatunde Odedeyi
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Contact lens;
- Electrostatic measurement;
- ultra-high precision turning;
- tribo-electric;
26.Study on the Interface of Acetylene Silazane (SZ) Modified QF/PSA Composites

机译：乙炔硅氮烷（QZ）改性QF / PSA复合材料的界面研究
- 作者：Xiaoyi Zhou;Yan Zhou;Shifeng Deng
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- silazane;
- coupling agent;
- silicon-containing arylacetylene resin;
- composite;
- mechanical properties;
27.Investigation of the Tensile Fracture Behavior of Notched C/SiC Composite Using In Situ SEM and Micro-CT

机译：缺口SEM复合材料的缺口C / SiC复合材料拉伸断裂行为研究。
- 作者：Baihong Jiang;Yi Yu;Lei Zhang;Shizhang Yu;Xiaojin Gao
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- C/SiC;
- tensile fracture;
- in situ SEM;
- micro-CT;
28.The Effect of Ply Orientation and Damage Detection in Composite Stiffened Panel Using Lamb Waves

机译：兰姆波对复合材料加劲板层定向和损伤检测的影响
- 作者：Ouadia Mouhat;Abdelmajid Bybi;Ahmed El Bouhmidi;Hasnae Boubel;Omaima Elmrabet;Mohamed Rougui
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Lamb Wave;
- stiffened panel;
- finite element method;
- vibration;
- natural frequency;
29.Improvements on Mechanical Property and Microstructure of Cementitious Composite Incorporated with Silica Fume and Carbon Nanotube

机译：硅粉和碳纳米管结合的水泥基复合材料的力学性能和微观结构的改进
- 作者：HAN Guyue;LUO Jianlin
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Cement-based material;
- Carbon nanotube;
- Nanofiller;
- Mechanical property;
- Microstructure;
30.Study of ZnO Nanoparticles-Decorated TiO_2 {001} Facets Heterostructures and Their Photocatalytic Activity

机译：ZnO纳米粒子修饰的TiO_2 {001}小平面异质结构及其光催化活性的研究
- 作者：Keyue Wu;Jingbiao Cui
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- TiO_2;
- ZnO;
- Heterostructure;
- Photocatalytic Activities;
31.Possible Ferromagnetism in YCuO System

机译：YCuO系统中可能的铁磁性
- 作者：Gongqin Xu;Xiaowei Chen;Xingyu Mao
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- diluted magnetic semiconductor;
- Room temperature ferromagnetism;
- YBCO superconductor;
- Spintronics;
32.Preparation of Photocatalytic Porous Nano-ZnO from Galvanizing Dross

机译：镀锌渣制备光催化多孔纳米ZnO
- 作者：Penghui Wu;Junlin Xie;Jiaming Yang;Wenhao Yang;Chi Mao;Xiaoqing Liu
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- galvanizing dross;
- nano-ZnO;
- photocatalysis;
- calcination temperature;
33.Photoluminescence from Suspended and Supported Graphene

机译：悬浮和负载石墨烯的光致发光
- 作者：Guyu Zhou;Fang Shen
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- photoluminescence;
- graphene;
- femtosecond laser;
- blackbody radiation;
34.A Modified Energy Method for Equilibrium Structure and Strain Energy of Armchair Single-Walled Carbon Nanotubes

机译：扶手椅单壁碳纳米管平衡结构和应变能的改进能量法
- 作者：Ming Gao;Lichun Bian;Chang Liu;Jiuming Guo
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Modified method;
- Armchair SWCNTs;
- Inversion Energy;
35.Thermal Performance Simulation of the Metal Foam Heat Sink

机译：金属泡沫散热器的热性能模拟
- 作者：Gaihong Hao;Yaping Zhang
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Power model;
- Metal foam heat sink;
- Cooling;
- Thermal performance;
36.Thermoelectric Properties of Al Doped ZnO Thin Films Fabricated Through Inkjet Printing

机译：喷墨印刷Al掺杂ZnO薄膜的热电性能
- 作者：Lim Joon Hoong
- 会议名称：《International conference on metallurgy technology and materials》 | 2019年
- Al-doped ZnO;
- thin films;
- ink-jet printing method;
- thermoelectric;
37.Preface

机译：前言
- 作者：Nor Sabirin Mohamed
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
38.Examining the Overall Moisture Management Capability of Fabric-Foam-Fabric Plied Material

机译：检查织物 - 泡沫织物镀层材料的整体湿气管理能力
- 作者：Chi-Wai Kan;Clare Man-Ching Ko;Nattadon Rungruangkitkrai;Nattaya Vuthiganond;Rattanaphol Mongkholrattanasit
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Overall moisture management capability;
- Polyurethane foam;
- Plying;
- Fabric;
39.The Effect of Rolling Temperature on Grain Size and Toughness in Hot Roiled Q345E H-Beam Steel

机译：轧制温度对热环Q345e H梁钢中晶粒尺寸和韧性的影响
- 作者：Liping Sun;Guohui Zhu;Jun Xing;Qiwei Chen
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Grain size;
- Toughness;
- Rolling Temperature;
- H beam Steel;
40.Microstructure Evolution of Copper by Three Roll Planetary Milling

机译：三辊行星铣削铜的微观结构演化
- 作者：Yuwei Zhou;Zening Mao;Ying Liu;Jing Tao Wang
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- three roll planetary mill;
- microstructure evolution;
- dynamic recrystallization;
41.Behaviors of Continuous Cooling Transformation and Microstructure Evolution of a High Strength Weathering Prefabricated Building Steel

机译：连续冷却变换的行为和高强度耐候预制建筑钢的微观结构演变
- 作者：Ruishan Xin;Huilong An;Shuai Ren;Jitan Yao;Jin Pan
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- weathering steel;
- prefabricated building;
- continuous cooling transformation;
- microstructure;
- hardness;
42.Influence Factors of Exfoliation Synthesis Exfoliated Graphite from Vietnamese Natural Graphite Flakes Using Microwave Irradiation

机译：使用微波辐射从越南天然石墨薄片中剥落合成剥落石墨的影响因素
- 作者：Pham Van Thinh;Nguyen Duy Trinh;Nguyen Thi Thuong;Van Thi Thanh Ho;Bui Thi Phuong Quynh;Long Giang Bach
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
43.Simplified Core-Shell Model of Biochar - iron Ore Mixture for Calculation of Effective Permittivity and Permeability

机译：简化生物炭铁壳模型 - 铁矿石混合物，用于计算有效介电常数和渗透率
- 作者：Anton P. Anzulevich;Igor V. Bychkov;Vasiliy D. Buchelnikov;Zhiwei Peng;Zhucheng Huang;Bin Xu;Leonid N. Butko;Svetlana N. Anzulevich;Sergey G. Moiseev
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- core-shell particles;
- effective medium approximation;
- biochar;
- iron reduction;
- effective permittivity;
- effective permeability;
44.The Influence of W/C Ratio and Superplasticizer Type on Porosity of Concrete with Air-Entraining Cement with Fly Ash

机译：W / C比和超塑化机类型对粉煤灰空气夹带水泥孔隙率的影响
- 作者：Beata Lazniewska-Piekarczyk
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- air-entraining cement;
- fly ash;
- air-entraining admixture;
- superplasticizer;
- concrete;
- porosity;
45.Non-Destructive Criteria of Plastic Deformation and Fracture in Structural Metals

机译：结构金属塑性变形和骨折的非破坏性标准
- 作者：Alexey G. Lunev;Mikhail V. Nadezhkin;Yulia V. Li;Svetlana A. Barannikova;Lev B. Zuev
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- ultrasound;
- Rayleigh waves;
- alloys;
- plastic deformation;
46.Tests for Waterproofing Materials, Made of Opuntia ficus-indica

机译：防水材料，由仙人掌榕树制成
- 作者：Arturo Santamaria Ortega;Miguel Angel Rubio Toledo;Gerardo Hernandez Neria;Ricardo Victoria Uribe;Sandra Alicia Utrilla Cobos;Marco Antonio Garcia Albarran
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Nopal;
- Diseno;
- Mexico;
- Material;
- Natural;
- Materials;
- Cactus;
- Opuntia;
- Ficus;
- Indica;
- Design;
- Waterproofing;
- Preakly pear;
- Construction;
47.Indication of Mechanical Damage through Piezochromic Materials

机译：通过压力色素材料造成机械损伤
- 作者：Maoshan Niu;Weidong Xiao;Liang Song;Yang Wang
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Piezochromism;
- Mechanochromism;
- Aggregation-induced emission;
- Damage detection;
48.Research on Measurement and Compensation of Backlash in CNC Machine

机译：CNC机器中间隙测量和补偿研究
- 作者：Ji Zhaoping
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Backlash;
- Numerical Control;
- Measurement;
- Compensation;
49.Preparation of NiCr-Sialon-CaF_2 Self-Lubricating Die Material and Its Friction at High Temperature

机译：Nicr-Sialon-Caf_2自润滑模具的制备及其高温摩擦
- 作者：Yang Hao;Chang Ming;Wang Huajun;Yao Zhenhua
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Powder metallurgy;
- Ni Based Self-lubricating Materials;
- Sialon ceramics;
- high temperature friction and wear;
50.Influences of Spindle Speed and Feed Rate on Exit Burr Height and Workpiece Diameter in Drilling Forging Brass

机译：主轴速度和进料速率对钻孔锻造钻孔高度和工件直径的影响
- 作者：Manit Timata;Charnnarong Saikaew
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Burr;
- drilling;
- forging brass;
- spindle speed;
- design of experiments;
51.High Temperature Internal Friction Relaxations in Cold-Rolled Titanium

机译：冷轧钛的高温内部摩擦松弛
- 作者：Z.C. Zhou;J. Du;S.Y. Gu;Y.J. Yan
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Titanium;
- cold-rolled Ti;
- internal friction;
- high temperature relaxation;
52.Effect of Molding Method on the Properties of Prepared Quartz Sand Sintered Brick Using the River Sand

机译：模塑方法对河流制备石英砂砂砖性能的影响
- 作者：Meihua Chen;Yan Yang;Wang Chen;Jieguang Song;Yue Liu;Xinshuang Guo;Lin Chen;Songlin Guo;Yuening Qin
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Molding method;
- sintered brick;
- quartz sand;
- river sand;
53.Activity Calculating Model of CaO-SiO_2-TiO_2 Molten Slag

机译：CAO-SIO_2-TIO_2熔渣的活动计算模型
- 作者：Zhixia Zhang
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- molten slag;
- coexistence theory;
- activity;
- calculating model;
54.Ultraviolet Radiation and Elevated Temperature Impact on Flexural and Swelling Properties of Glass Fiber Reinforced Plastic Pipes

机译：紫外线辐射和升高温度影响玻璃纤维增强塑料管的弯曲和肿胀性能
- 作者：Meshal Al-Samhan;Fatema Al-Attar;Jacob Samuel;Gils Abraham;A. Al-Banna
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Glass fiber composites;
- aging;
- flextural stress;
- swelling;
55.Robust Micro Arc Oxidation Coatings on 6061 Aluminum Alloys via Surface Thickening and Microvoid Reducing Approach

机译：6061铝合金通过表面增厚和微宽度减少方法鲁棒微弧氧化涂层
- 作者：Qingjun Zhu;Binbin Wang;Xia Zhao;Binbin Zhang
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- aluminum alloy;
- coating;
- additive;
- micro arc oxidation;
- properties;
56.The Recent Development of Study on H13 Hot-Work Die Steel

机译：最近关于H13热轧机芯钢研究的发展
- 作者：Zheng-Cun Zhou;Jie Du;Yong-Jian Yan;Cui-Lian Shen
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- H13 steel;
- heat Treatment;
- microstructures and mechanical properties;
- surface treatment;
57.Application of Response Surface Methodology to Optimize The Process of Saponification Reaction from Coconut Oil in Ben Tre - Vietnam

机译：响应面方法在本Tre - 越南椰子油优化皂化反应过程中的应用
- 作者：Nguyen Phu Thuong Nhan;Tran Thien Hien;LeThi Hong Nhan;Phan Nguyen Quynh Anh;Le Tan Huy;Nguyen Thi Cam Trinh;Duy Trinh Nguyen;Long Giang Bach
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Response surface methodology;
- Saponification reaction;
- Coconut oil;
58.Enhanced Surface Mechanical Properties of Cr12MoV Using Ultrasonic Surface Rolling Process and Deep Cryogenic Treatment

机译：使用超声波表面轧制工艺和深冷冻处理增强CR12MOV的表面力学性能
- 作者：Shuai Ren;Yun Fei Zhang;Feng Xue;Rui Shan Xin;Ying Li Zhao;Ming Qiang Fan;Zi Zhen Xu;Jin Bao Chang
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Cr12MoV;
- Ultrasonic surface rolling process;
- Deep cryogenic treatment;
59.Preparation of Tin Oxide Nanometer Thin Films by Hydrothermal Method

机译：水热法制备氧化锡纳米薄膜
- 作者：Fang Wang;Yang Chao;Minghan Xu;Ruihua Wang;Aixia Chen;Ruxin Deng;Dujuan Chang;Jieguang Song;Yuening Qin
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Thin films;
- tin oxide;
- hydrothermal method;
- synthetic conditions;
60.Influence of the Mole Ratio of Salt to Alkali on the Surface Structure of SnO_2 Thin Film

机译：盐与碱对SnO_2薄膜表面结构的影响
- 作者：Yue Liu;Ge Xiong;Yan Yang;Long He;Meihua Chen;Jieguang Song;Lin Chen;Songlin Guo;Yuening Qin
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- SnO_2 film;
- molar ratio of salt to alkali;
- FTO;
- hydrothermal precipitation method;
61.A Simple Approach for Immobilization of Fe-Core/Au-Shell Magnetic Nanoparticles on Multi-Walled Carbon Nanotubes via Cu(l) Huisgen Cycloaddition: Preparation and Characterization

机译：通过Cu（L）Huisgen环加成的多壁碳纳米管上Fe-Core / Au-壳磁性纳米粒子固定的简单方法：制备和表征
- 作者：Duy Trinh Nguyen;Nguyen Phu Thuong Nhan;Tran Thien Hien;Nguyen Dai Hai;Dai-Viet N. Vo;Long Giang Bach
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Fe-core/Au-shell magnetic;
- Multi-walled carbon nanotubes;
- MWNTs-Fe@Au nanohybrids;
- Click chemistry;
62.Effect of Sintering Temperature on the Densification Mechanism of Al_2O_3-Al Metal Ceramics via the Powder Metallurgy Method

机译：烧结温度对Al_2O_3-Al金属陶瓷通过粉末冶金方法的致密化机理的影响
- 作者：Jieguang Song;Lin Chen;Yun Xiang;Yue Liu;Xinshuang Guo;Xiling Zhang;Songlin Guo;Yuening Qin
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Metal ceramics;
- sintered temperature;
- densification mechanism;
- powder metallurgy method;
63.Synthesis Parameters of Ultrafine YAG Powder Materials via Hydrothermal Precipitation Method

机译：高温沉淀法合成超细粉末材料的合成参数
- 作者：Minghan Xu;Aixia Chen;Ruihua Wang;Longtao Liu;Zhihui Li;Shibin Li;Jieguang Song;Lin Chen;Chengwei Hao
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- YAG;
- ultra-fine powder;
- synthesis parameters;
- hydrothermal precipitation method;
64.Preparation and Characterization of Al_2O_3-Al Cermet with Coated Microstructure Using Powder Metallurgy Method

机译：用粉末冶金方法涂覆微观结构的Al_2O_3-Al金属陶瓷的制备与表征
- 作者：Ruihua Wang;Aixia Chen;Darning Du;Fang Wang;Caiwen Li;Qiumin Zou;Jieguang Song;Lin Chen;Chengwei Hao
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Cermet;
- Al_2O_3;
- Al;
- coated microstructure;
- powder metallurgy method;
65.Optimizing the Pomelo Oils Extraction Process by Microwave-Assisted Hydro-Distillation Using Soft Computing Approaches

机译：通过使用软计算方法微波辅助水力蒸馏优化柚油提取过程
- 作者：Tran Thien Hien;Nguyen Phu Thuong Nhan;Duy Trinh Nguyen;Van Thi Thanh Ho;Long Giang Bach
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Response surface methodology;
- Microwave-assisted hydrodistillation;
- Pomelo oil;
- yield;
66.Preparation of Hollow Silica Spheres by Soft Template Method

机译：软模板法制备空心二氧化硅球
- 作者：Zhiqiang Sun;Huadong Wang;Heng Dong;Shuqin Li;Yi Lu
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- SiO_2 spheres;
- Hollow structure;
- Soft template;
- Composite powder;
67.Study of the Residual Stresses Variation into the Sandwich Structure Subjected to Thermomechanical Loading

机译：对夹层结构进行热机械负荷的剩余压力变化的研究
- 作者：Khalid Messaoudi;Farida Bouafia;Fethi Benkhenafou;Lyes DOUADJI;WeiWei DU
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Finite Element;
- Residual Stress;
- Thermo-Mechanical loading;
- Material Sandwich;
68.Preparation of Dispersed Y_2O_3-MgO Nanopowder from Stearate

机译：用硬脂酸制备分散的Y_2O_3-MgO纳米液
- 作者：Wang Huadong;Sun Zhiqiang;Yang Xiaobo;Wu Tao;Dong Heng;Li Shuqin
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- stearate;
- stearic acid;
- Y_2O_3-MgO;
- nanopowder;
69.Preliminary Study of Compressive Strength of Concrete Incorporated with Waste Paper Fibres

机译：废纸纤维混凝土压压强度的初步研究
- 作者：Mohd Syahrul Hisyam Mohd Sani;Fadhluhartini Muftah;Ahmad Rasidi Osman
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- compressive strength;
- concrete;
- waste paper fibres;
70.Study on Cracking of Aluminum Alloy Strain Clamps for 500kV Transmission Line

机译：500kV输电线铝合金应变钳裂纹的研究
- 作者：Yutong Zhou;Zhengqiang Zhou;Jionggeng Wang;Hongjian Luo;Jie Zhang;Jiayuan Hu
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- strain clamp;
- aluminum alloy;
- drainage plate;
- cracking;
71.Comparison the Rapid Microwave-Assisted Polyol Route and Modified Chemical Reduction Methods to Synthesize The Pt Nanoparticles on the Ti_(0.7)W_(0.3)O_2 Support

机译：比较快速微波辅助多元醇途径和改性化学还原方法，以在Ti_（0.7）W_（0.3）O_2载体上合成Pt纳米颗粒
- 作者：Hau Quoc Pham;Tai Thien Huynh;At Van Nguyen;Anh Tram Ngoc Mai;Vi Thuy Thi Phan;Long Giang Bach;Duy Trinh Nguyen;Van Thi Thanh Ho
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Ti_(0.7)W_(0.3)O_2;
- W-doped TiO_2;
- solvothermal process;
- rapid microwave-assisted polyol;
- modified chemical reduction;
72.Self-Assembled Growth of Tail-Like Cluster Composed of Flower-Shaped ZnO Microwires by Chemical Vapor Deposition Method

机译：由化学气相沉积法由花形ZnO微线组成的自组装成长
- 作者：Dechao Yang;Yu Qiu;Bo Wu;Jingqian Luo;Zhiyu Huang;Jinyu Li;Wenbin Song;Yang Zong
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- ZnO;
- cluster;
- flower-shaped;
- coalescence;
73.Effect of Carbon on the Microstructure of a Cu-Fe Alloy

机译：碳对Cu-Fe合金微观结构的影响
- 作者：De Ping Lu;Wei Guo;Jiang Jiang;Lei Lu;Jin Zou;Qing Feng Fu;Ke Ming Liu
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Cu-Fe alloy;
- Carbon;
- Microstructure;
74.Composition, Structure and Mechanical Properties of CrAlC Films Deposited by Arc Sputtering Technique

机译：电弧溅射技术沉积的Cralc膜的组成，结构和力学性能
- 作者：A.P. Rubshtein;A.B. Vladimirov;S.A. Plotnikov
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- CrAlC thin film;
- physical vapor deposition;
- mechanical characteristics;
- amorphous carbon;
- multilayer coating;
75.Transient Thermal Hydrodynamic Lubrication Analysis of Textured Piston Ring/Cylinder Liner

机译：纹理活塞环/气缸套的瞬态热流体动力润滑分析
- 作者：Sheng Gang Guo;Bin Wang;Qiu Ying Chang
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Textured surface;
- Piston ring/cylinder liner;
- Temperature;
- Transient thermal hydrodynamic lubrication;
76.The Method to Determine Material Constants in Ductile Fracture Criterion

机译：测定韧性骨折标准中材料常数的方法
- 作者：Jun Wei;Lianfa Yang;Jian guo
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- ductile fracture criterion;
- material constants;
- basic test;
77.Mechanical Analysis of Low and High Chromium Steels Used in Hot Strip Work Rolls

机译：热带工作辊中使用的低聚铬钢的机械分析
- 作者：Fethi Benkhenafou;I. Fernandez Pariente;F. Javier Belzunce;A. Ziadi;Shi MingQuan;Lyes Douadji
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- High chromium steels;
- XRD;
- SEM;
- hardness and fracture toughnesst;
78.Nanowear of Multilayer (TiCx/Ti/C)÷a-C_n Coatings

机译：多层纳米型（TiCX / Ti / C）÷A-C _N涂层
- 作者：A.P. Rubshtein;A.B. Vladimirov;S.A. Plotnikov
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- multilayer coating;
- amorphous carbon;
- titanium-containing carbon;
- PVD technique;
- wear;
- mechanical characteristics;
79.Diffusion Behavior and Wear Mechanism of WC/Co Tools when Machining of Titanium Alloy

机译：钛合金加工时WC / CO工具的扩散行为及磨损机理
- 作者：Dashan Bai;Jianfei Sun;Kai Wang;Wuyi Chen
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Titanium alloy;
- WC/Co tools;
- Diffusion behavior;
- Diffusion wear mechanism;
80.Removal of Phosphorus from High Phosphorus Iron Ores in Wushan Mountain by Crosscurrent Acid Leaching

机译：通过交叉酸浸出去除巫山山脉高磷铁矿石的磷
- 作者：Xiaoyan Xiang;Wentang Xia;Xiaoli Yuan;Jianguo Yin;Juan An
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- High phosphorus iron ores;
- dephosphorization;
- thermodynamics;
- crosscurrent acid leaching;
- circulation;
81.The Study on Self-Pulverization Rate of Steelmaking Slag Modified and Reduced

机译：改性炼钢矿渣自粉率的研究
- 作者：Lei Rao;Liu-Shun Wu;Jue Wang;Yun Zhou;Yuan-Chi Dong;Man-Cheng Gui
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Steelmaking slag;
- Self-pulverization;
- Modifying Reducing;
82.Effect of Flow Pattern on Energy Consumption and Properties of Copper Powder in the Electrolytic Process

机译：流动模式对电解过程中铜粉能耗与性能的影响
- 作者：Wentang Xia;Xiaoyan Xiang;Wenqiang Yang;Jianguo Yin
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- Electrolytic copper powder;
- new electrolysis cell;
- energy consumption;
- current efficiency;
- copper powder size;
83.Effect of Magnetic Field on Solidification Behavior of a MnCu Damping Alloy

机译：磁场对MnCu阻尼合金凝固行为的影响
- 作者：JIANG Zechao;YANG Fan;LAN Jian;TIAN Qingchao;XUAN Weidong;REN Zhongming
- 会议名称：《International conference on metallurgy technology and materials》 | 2018年
- strong magnetic field;
- deflection angle;
- primary dendrite;
- composition segregation;