首页>外文会议>Conference on technologies and properties of modern utility materials

Conference on technologies and properties of modern utility materials

召开年：2013
召开地：Katowice(PL)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.The potential and application areas of forging aided by shear stress

机译：剪应力辅助锻造的潜力和应用领域
- 作者：Marek Tkocz;Zdzislaw Cyganek;Franciszek Grosman
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- severe plastic deformation;
- unconventional metal forming;
- shear stress;
- forging;
- compression;
- upsetting;
- cyclic deformation;
2.Influence of Copper Addition on Structure and Hardness of the ZnAl40Cu3 Alloy after Heat Treatment

机译：添加铜对热处理后ZnAl40Cu3合金组织和硬度的影响
- 作者：Rafal Michalik;Agnieszka Tomaszewska
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Zn-Al-Cu alloys;
- structure;
- hardness;
3.The repair welding technology of casts magnesium alloy QE22

机译：铸镁合金QE22的补焊工艺
- 作者：Robert Kocurek;Janusz Adamiec
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- repair of casts;
- casting defects;
- QE22;
- magnesium welding;
- casts magnesium alloy;
4.Welding of steel with high manganese and aluminum content

机译：焊接高锰铝含量的钢
- 作者：Stanislaw Lalik;Grzegorz Niewielski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- high manganese steel;
- welding;
- mechanical properties;
- microstructure;
5.Analysis of cracking process in conditions of high-temperature creep of castings form the modified superalloy IN-713C

机译：改进高温合金IN-713C在铸件高温蠕变条件下的开裂过程分析
- 作者：Marek Ciesla;Franciszek Binczyk;Marcin Manka
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- nickel superalloys;
- macrostructure;
- modification;
- mechanical properties;
- creep;
6.Porosity in turbine blades cast into new shell moulds made of SiC based ceramics

机译：涡轮叶片的孔隙率铸入由SiC基陶瓷制成的新型外壳模具中
- 作者：Stanislaw Roskosz
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- turbine blades;
- investment casting;
- porosity;
- quantitative metallography;
- nickel based superalloy IN 713C;
7.Research on Mechanical Properties of Thin Sheets Blanks Made of Creep-Resisting Nickel Superalloys

机译：耐蠕变镍高温合金薄板坯的力学性能研究
- 作者：Monika Hyrcza-Michalska
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
8.Influence of the type of medical sterilisation on electrochemical properties of passive layer created on X10CrNi 18-8 steel

机译：医用灭菌方式对X10CrNi 18-8钢钝化层电化学性能的影响
- 作者：Joanna Przondziono;Witold Walke
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- X10CrNi18-8 steel;
- chemical passivation;
- ethylene oxide;
- steam sterilisation;
- EIS;
9.The structure and growth kinetics of zinc coatings on link chains produced of the 23MnNiCrMo5-2 steel

机译：23MnNiCrMo5-2钢在链上形成的锌涂层的结构和生长动力学
- 作者：Henryk Kania;Piotr Liberski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- hot dip galvanizing;
- zinc coatings;
- link chains;
10.Analysis of the cracking processes of jointing components used in turbine valve chest

机译：汽轮机气门室接头零件开裂过程分析
- 作者：Marek Ciesla;Kazimierz Mutwil
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- power-supply installation;
- morphology of fracture;
- microstructure;
- high-temperature creeping;
- stress;
11.The structure of coatings obtained in the Zn-31Al-3Mg bath on high-silicon steel

机译：高硅钢在Zn-31Al-3Mg镀液中获得的涂层结构
- 作者：Henryk Kania
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- hot dip galvanizing;
- Zn-Al-Mg coatings;
- galvanizing bath;
- corrosion resistance;
12.Influence of Corrosion in 'Acid Rain' on the Structure of Surface Layer of the ZnAl22Cu3 Alloy

机译：酸雨腐蚀对ZnAl22Cu3合金表面层结构的影响
- 作者：Rafal Michalik
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Zn-Al-Cu alloys;
- corrosion resistance;
- REE;
- structure;
13.Gas corrosion of chromium-manganese steel in atmospheres with low oxygen partial pressure

机译：氧分压低的气氛中铬锰钢的气体腐蚀
- 作者：Roman Przeliorz;Jaroslaw Piatkowski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Cr-Mn steels;
- oxidation;
- thermogravimetric analysis;
- diffusion;
14.Liquid metal embrittlement of steel with a coating obtained by batch hot dip method in a Zn + 2 Sn bath

机译：在Zn + 2％Sn浴中采用分批热浸法获得的带有涂层的钢的液态金属脆化
- 作者：Jacek Mendala;Piotr Liberski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- embrittlement;
- LME;
- LMAC;
- galvanizing;
- Zn coating;
- Zn + Sn;
15.Effect of carbon addition on the microstructure and properties of unalloyed titanium

机译：碳添加量对非合金钛组织和性能的影响
- 作者：Agnieszka Szkliniarz
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Ti-C alloys;
- microstructure;
- properties;
- TiC carbides;
16.Resistance to electrochemical corrosion under conditions of sterilisation of guide wires used in endourological treatment

机译：在用于内科治疗的导丝灭菌条件下的耐电化学腐蚀
- 作者：Joanna Przondziono;Witold Walke
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- endourology;
- X10CrNi18-8 steel;
- steam sterilisation;
- potentiodynamic tests;
17.Structure of aluminium matrix composite with ceramic preform obtained by centrifugal infiltration process

机译：离心渗透法制得的陶瓷基坯铝基复合材料的结构
- 作者：Anna J. Dolata
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- aluminum matrix composites;
- ceramic preform;
- centrifugal casting;
- structure;
18.Influence of the ion nitriding process on the electrochemical properties of X39Cr13 steel used for surgical instruments

机译：离子渗氮工艺对手术器械X39Cr13钢电化学性能的影响
- 作者：Martin Basiaga;Joanna Przondziono
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- X39Cr13 steel;
- corrosion resistance;
- ion nitriding;
- surgical tools;
19.Corrosion resistance of Zn-31AlMg coatings obtained by batch hot dip method

机译：间歇热浸法制得的Zn-31AlMg涂层的耐蚀性
- 作者：Henryk Kania;Marzena Bieronska
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- hot dip galvanizing;
- zinc coatings;
- corrosion resistance;
20.Classification and assessment of environmental aspects of converter and electric steel plants

机译：转炉和电工钢厂环境方面的分类和评估
- 作者：Bozena Gajdzik;Andrzej Wycislik;Krystian Janiszewski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- environmental aspects;
- steel plants;
- converter and electric furnaces;
21.Synergistic influence of the addition of Al, Ni and Pb to a zinc bath upon growth kinetics and structure of coatings

机译：向锌浴中添加铝，镍和铅对镀层的生长动力学和结构的协同影响
- 作者：Henryk Kania;Piotr Liberski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- hot dip galvanizing;
- zinc bath;
- zinc coatings;
22.Plasticity and microstructure of magnesium - lithium alloys

机译：镁锂合金的塑性与组织。
- 作者：Dariusz Kuc;Eugeniusz Hadasik;Jaroslaw Mizera;Tomasz Mikuszewski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- magnesium - lithium alloy;
- hot compression;
- flow stress;
- microstructure;
23.TEM and X-ray examinations of intermetallic phases and carbides precipitation in an Fe-Ni superalloy during prolonged ageing

机译：长时间老化过程中Fe-Ni高温合金中金属间相和碳化物沉淀的TEM和X射线检查
- 作者：Kazimierz J. Ducki;Jacek Mendala;Lilianna Wojtynek
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- A-286 alloy;
- precipitation;
- intermetallic phases;
- TEM;
- X-ray analysis;
24.Evaluation of refractory lining of the blast furnace hearth and bottom in five years of its operation on the basis of the isotherms shapes

机译：根据等温线形状评估高炉炉缸和炉底耐火炉衬在其运行的五年内
- 作者：Grzegorz Kopec;Boleslew Machulec
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- blast furnace;
- refractory lining;
- hearth and bottom;
- temperature field;
- isotherms;
25.Effects of raw material contaminants on the ferrosilicon melting process in the submerged arc furnace

机译：原料污染物对埋弧炉硅铁熔炼过程的影响
- 作者：Boleslaw Machulec;Wojciech Bialik
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- ferrosilicon;
- submerged arc furnace;
- model;
- Gibbs FEM Method;
26.Investigation of the initial stage of hot dip zinc coatings on iron alloys with various silicon contents

机译：不同硅含量的铁合金上热浸锌涂层初始阶段的研究
- 作者：Piotr Liberski;Adam Tatarek;Jacek Mendala
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Hot dip galvanizing;
- zinc coating;
- Fe-Zn-Si system;
- dissolution;
- diffusion;
27.Kinetics of growth and structure of coatings obtained on Sandelin steels in the high-temperature galvanizing process

机译：Sandelin钢在高温镀锌过程中获得的涂层生长和组织动力学
- 作者：Henryk Kania
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- high temperature galvanizing;
- hot dip galvanizing;
- zinc coatings;
28.Technological effects of metallurgical industry restructuring in Poland

机译：波兰冶金行业结构调整的技术效应
- 作者：Bozena Gajdzik;Krystian Janiszewski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- metallurgical industry;
- technological changes;
- restructuring process;
29.Influence of the steel scrap classes on the liquid steel output melt in electric arc furnace

机译：废钢种类对电弧炉钢水输出钢水的影响
- 作者：Krystian Janiszewski;Ladislav Socha;Karel Gryc
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- steel;
- liquid steel;
- ferrous scrap;
- electric arc furnace;
30.Effect of solution treatment on the microstructure of Ti-C alloys

机译：固溶处理对Ti-C合金显微组织的影响
- 作者：Agnieszka Szkliniarz;Wojciech Szkliniarz
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Ti-C alloys;
- heat treatment;
- microstructure;
- TiC carbides;
31.Scanning transmission electron microscopy studies of the microstructure of high chromium steel after long time exposure

机译：长时间暴露后高铬钢显微组织的扫描透射电镜研究
- 作者：Kinga Rodak;Adam Hernas
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- scanning transmission electron microscopy;
- degradation of HCM12;
- chromium steel;
- microstructure;
32.Utilization of metallurgical waste in non-metallurgical industry

机译：非冶金行业中冶金废物的利用
- 作者：Teresa Lis;Krzysztof Nowacki;Tomasz Malysa
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- metallurgical waste;
- recycling materials;
- environmental aspects;
33.Evaluation of the applicability of Sanicro 25 steel in supercritical boilers

机译：Sanicro 25钢在超临界锅炉中的适用性评估
- 作者：Przemyslaw Jamrozik;Maria Sozanska
- 会议名称：《》 | 2014年
- Creep strength;
- corrosion resistance;
- hardness;
- boilers;
- steel;
- Sanicro 25;
34.Influence of Si and REE on the Corrosion Resistance of ZnAl40Cu3 Alloy

机译：Si和REE对ZnAl40Cu3合金耐蚀性的影响
- 作者：Rafal Michalik
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Zn-Al-Cu alloys;
- corrosion resistance;
- REE;
35.Kinetics of corrosion processes of alloy on the intermetallic phase matrix FeAl in high temperature in air atmosphere

机译：空气中高温下金属间相基体FeAl上合金腐蚀过程的动力学
- 作者：Janusz Cebulski;Stanislaw Lalik
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- intermetallic alloy;
- corrosion;
36.Effect of boron addition on the microstructure of Ti-47Al-2W-0.5Si alloy

机译：硼添加对Ti-47Al-2W-0.5Si合金组织的影响
- 作者：Wojciech Szkliniarz;Agnieszka Szkliniarz
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- TiAl based alloys;
- grain refinement;
- modification;
- boron addition;
37.Influence of Heat Treatment on the Hardness of ZnAl22Cu3 Alloy

机译：热处理对ZnAl22Cu3合金硬度的影响
- 作者：Rafal Michalik;Agnieszka Tomaszewska
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Zn-Al-Cu alloys;
- structure;
- hardness;
38.The influence of slenderness ratios of multi-hole ceramic filters from S_F -1.67 to S_F - 8.36 of filter surface on efficiency of liquid steel refining from non-metallic phase

机译：多孔陶瓷过滤器细长比从过滤器表面的S_F -1.67到S_F-8.36对非金属相钢水精炼效率的影响
- 作者：Krystian Janiszewski;Bozena Gajdzik;Andrzej Wycislik
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- steel;
- refining;
- ceramic filter;
- solid non-metallic inclusions;
- filter slenderness ratios;
39.Dissolution of carbide isolates in acids using microwave technique

机译：用微波技术将碳化物分离物溶解在酸中
- 作者：Andrzej Wycislik;Janusz Richter
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- carbide isolates;
- dissolution in acids;
- microwave technique;
40.The correlation between the surface geometry of tested materials and the shape of lubricant drop

机译：被测材料的表面几何形状与润滑剂滴的形状之间的相关性
- 作者：Anna J. Dolata;Jakub Wieczorek
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- aluminium matrix composites;
- surface geometry;
- friction;
- lubrication;
41.Non-metallic inclusions in castings made of nickel-base superalloys

机译：镍基高温合金铸件中的非金属夹杂物
- 作者：Bartosz Chmiela;Stanislaw Roskosz
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Superalloys;
- investment casting;
- non-metallic inclusions;
42.Metallurgical quality of feed ingots and castings made from nickel and cobalt superalloys

机译：镍和钴高温合金制成的饲料锭和铸件的冶金质量
- 作者：Franciszek Binczyk;Jan Cwajna;Pawel Gradon;Maria Sozanska;Marek Ciesla
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- superalloys;
- nickel alloys;
- cobalt alloys;
- feed ingot;
- ATD analysis;
- undesired inclusions;
- impurities;
43.Influence of forming on the properties of alloy based on the matrix of FeAl intermetallic phase

机译：FeAl金属间相基质对成形对合金性能的影响
- 作者：Janusz Cebulski;Katarzyna Basa;Dorota Pasek
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- structure;
- intermetallic alloy;
- mechanical properties;
44.Production methods of thin, narrow and profiled steel strips

机译：薄，窄和异型钢带的生产方法
- 作者：Jerzy Herian;Krzysztof Aniolek
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- flattened strips;
- their production methods;
- metal flow;
- widening;
45.Physical and mechanical properties of composites with aluminum alloy matrix designed for metal forming

机译：设计用于金属成型的铝合金基复合材料的物理和机械性能
- 作者：Jerzy Myalski;Jakub Wieczorek;Adam Plachta
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- aluminium matrix composites;
- mechanical properties;
- physical properties;
46.Influence of deformation parameters on the structure in selected intermetallic from Al-Fe diagram

机译：变形参数对Al-Fe图选择金属间化合物结构的影响
- 作者：Magdalena Jablonska;Dariusz Kuc;Iwona Bednarczyk
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- intermetallics from Al-Fe diagram;
- deformation tests;
- cumulative plastic deformation;
- structure;
47.Effect of cooling rate and modification on the structure of cast AlSi17 alloy

机译：冷却速度和变质对铸造AlSi17合金组织的影响
- 作者：Jaroslaw Piatkowski;Tomasz Matula
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- hypereutectic of AlSi cast alloys;
- crystallization;
- modification;
- thermal analysis;
48.X-ray analysis of the precipitation process in an Fe-Ni superalloy

机译：Fe-Ni高温合金中析出过程的X射线分析
- 作者：Lucjan Pajak;Kazimierz J. Ducki;Lilianna Wojtynek
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- A-286 alloy;
- prolonged ageing;
- X-ray analysis;
- austenite lattice constant;
49.Estimation of flow stress of zinc-titanium strip during reverse rolling

机译：反向轧制过程中锌钛带流动应力的估算
- 作者：Marek Spyra;Marek Tkocz;Eugeniusz Hadasik
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- zinc-titanium;
- reverse rolling;
- strip rolling;
- flow stress;
- roll gap;
- temperature distribution;
50.Characteristics of the structure of welded joints in Sanicro 25 steel

机译：Sanicro 25钢的焊接接头结构特征
- 作者：Przemyslaw Jamrozik;Maria Sozanska
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- Alloy;
- welding;
- microstructure;
- hardness;
- boilers;
- Sanicro 25;
51.The effect of heat treatment on creep resistance of castings from the modified superalloy MAR-247

机译：热处理对改性超合金MAR-247铸件抗蠕变性的影响
- 作者：Marek Ciesla;Franciszek Binczyk;Marcin Manka
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- nickel superalloy;
- microstructure;
- modification;
- heat treatment;
- creep;
52.Nucleation and growth of primary silicon crystals in AlSi alloy after modification with CuP and overheating to a temperature of 920°C

机译：经CuP改性并加热至920°C的温度后，AlSi合金中原始硅晶体的形核和生长
- 作者：Jaroslaw Piatkowski
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- hypereutectic silumins;
- overheating;
- modification;
- proeutectic crystallization;
53.High manganese TWIP steel - technological plasticity and selected properties

机译：高锰TWIP钢-技术可塑性和精选性能
- 作者：Magdalena Jablonska;Grzegorz Niewielski;Rudolf Kawalla
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- high-manganese steels;
- deformation parameters;
- mechanical twins;
- substructure;
54.PREFACE

机译：前言
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
55.Application of incremental metal forming for production of aircraft integral panels

机译：增量金属成型在飞机整体面板生产中的应用
- 作者：Marek Tkocz;Franciszek Grosman
- 会议名称：《Conference on technologies and properties of modern utility materials》 | 2014年
- unconventional metal forming;
- incremental forming;
- integral panels;
- forging;
- press load;
- strain distribution;