首页>外文会议>Nirma University International Conference on Engineering

Nirma University International Conference on Engineering

召开年：2012
召开地：Ahmedabad(IN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Design of speed, energy and power efficient reversible logic based vedic ALU for digital processors

机译：基于速度，能源和功率高效可逆逻辑的数字处理器vedic ALU设计
- 作者：Gupta Abhishek;Malviya Utsav;Kapse Vinod
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Urdhva Triyambakam Sutra;
- divide and conquer approach;
- reversible logic gate;
- tree multiplication structure;
2.A robust two-stage super-resolution algorithm

机译：鲁棒的两级超分辨率算法
- 作者：Chaudhary Priyank;Fataniya Bhupendra
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Dictionary learning method;
- multi-frame;
- sparse representation;
- training;
3.An enhanced non-local variational level set segmentation and bias correction

机译：增强的非局部变分水平集分割和偏差校正
- 作者：Verma Chandradatta;Sahu Chandrahas
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Bias Correction;
- Irregular Intensities;
- K means clustering;
- Level Set;
- Segmentation;
- continuous minimization;
- energy minimization;
4.Innovative 3-D adaptive filtering for MRI analysis

机译：用于MRI分析的创新性3-D自适应滤波
- 作者：Shaikh J.M.;Pergad N.D.
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- 3-D Adaptive;
- Analysis;
- Comparative Wavelets;
- Slices of MRI;
5.Design of sensorless induction machine drive operate with SVPWM estimation

机译：基于SVPWM和估算的无传感器感应电机驱动器设计
- 作者：Chouhan Hemant;Jain Dinesh Chandra;Verma H.K.
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Induction Machine;
- MRAS;
- SVPWM;
- Speed estimation;
- Vector Control;
6.Transmission wheeling cost evaluation using MW-Mile methodology

机译：使用MW-Mile方法评估传动轮成本
- 作者：Jain Gaurav;Singh Kanwardeep;Palwalia Deeraj Kumar
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Deregulation;
- Open access;
- Transmission wheeling;
7.Unit commitment using Micro Genetic Algorithm

机译：使用微遗传算法的单位承诺
- 作者：Gupta Manish;Haque Shazia
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Micro Genetic Algorithm;
- String Correction Operator;
- Unit Commitment;
8.MPPT for wind energy conversion system with closed loop converter control

机译：MPPT用于具有闭环变流器控制的风能转换系统
- 作者：Akram Mohammad Waseem;Kadwane Sumant G.
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Buck converter;
- Maximum power point tracking (MPPT);
- Wind energy conversion system (WECS);
- Wind generator(WG);
9.A new conduction angle controller for Unified Power Flow Controller

机译：统一潮流控制器的新型导通角控制器
- 作者：Baskar S.;Sudhakiran P.
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- 150 degree inverter;
- SMIB;
- Switching Level Modeling;
- Unified Power Flow Controller;
10.Solar power forecasting modeling using soft computing approach

机译：使用软计算方法的太阳能发电预测建模
- 作者：Singh Vikas Pratap;Vaibhav Kumar;Chaturvedi D.K.
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- artificial neural network and generalized neural network;
- forecasting;
- soar power;
11.Fault analysis of controllable series compensated transmission line with Wavelet Transform and Support Vector Machine

机译：基于小波变换和支持向量机的可控串联补偿线路故障分析。
- 作者：Vyas Bhargav;Maheshwari Rudra Prakash;Das Biswarup
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
12.Influence of renewable promotion policies on power system operation with carbon emission trading

机译：可再生能源推广政策对碳排放交易对电力系统运行的影响
- 作者：Verma Yajvender Pal;Kumar Ashwani
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Emission Allowances;
- Feed-in-Tariff;
- Renewable Purchase Obligation (RPO);
13.Power quality improvement using hybrid active power filter for a DFIG based wind energy conversion system

机译：使用基于DFIG的风能转换系统的混合式有源功率滤波器改善电能质量
- 作者：Gupta Narayan Prasad;Gupta Preeti;Masand Deepika
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Grid side converter;
- hybrid active power filter;
- rotor side converter;
- total harmonic distortion;
14.Simulation, design and practical realization of single phase PWM boost rectifier

机译：单相PWM升压整流器的仿真，设计与实际实现
- 作者：Garasiya D.V.;Vora Santosh C.;Kapil P.N.
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- PWM rectifier;
- THD;
- boost rectifier;
- pulse width modulation;
- unity power Factor;
15.Performance analysis of fractional order cascade controller for boost converter in solar photo-voltaic system

机译：太阳能光伏系统升压变换器分数阶级联控制器的性能分析
- 作者：Karanjkar Dnyaneshwar S.;Chatterji S.;Kumar Amod;Shimi S.L.
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Boost converter;
- current mode control;
- duty cycle control;
- fractional control;
16.Evaluation of emission allocation criterion for the reduction of emission in hybrid power system using PSO

机译：使用PSO评估混合动力系统中减少排放的排放分配标准
- 作者：Verma Yajvender Pal;Kumar Ashwani
- 会议名称：《Nirma University International Conference on Engineering》 | 2012年
- Emission Allowances Allocation;
- Emission Trading;
17.Thermo-physical characterization of Paraffin based Fe3O4 nanofluids

机译：石蜡基Fe3O4纳米流体的热物理特征
- 作者：Rohit S. Khedkar;Sai Kiran.A;Shriram S. Sonawane
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Nanoparticles;
- Ethylene glycol;
- Paraffin oil;
- Thermal conductivity;
- Viscosity.;
18.Utilization of Bagasse Ash as a Partial Replacement of Fine Aggregate in Concrete

机译：利用甘蔗渣作为混凝土中的细骨料的部分替代
- 作者：Prashant O Modani;M R Vyawahare
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Bagasse ash;
- Concrete;
- Workability;
19.Static Analysis of Electrostatically Actuated Micro Cantilever Beam

机译：静电致动微悬臂梁的静态分析
- 作者：Anchit J. Kaneria;D. S. Sharma;R. R. Trivedi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Electrostatic Actuator;
- Pull-in instability;
- MEMS;
20.Experimental Investigations for Start Up and Maximum Heat Load of Closed Loop Pulsating Heat Pipe

机译：闭环脉动热管启动和最大热负荷的实验研究
- 作者：R K Sarangi;M V Rane
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Pulsating Heat Pipe;
- Optimum Fill Ratio;
- Start up Heat Load;
- Maximum Heat Load;
21.Analysis of RC Brick Filled Composite Beams using MIF

机译：使用MIF分析RC砖填充复合梁
- 作者：Patel Rakesh;Dubey S.K.;Pathak K.K.
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- RC Brick filled beams;
- RC beams;
- Method of initial functions.;
22.Effect of Crack on Modal Parameters of a Cantilever Beam Subjected to Vibration

机译：裂缝对经受振动悬臂梁模态参数的影响
- 作者：D.K. Agarwalla;D.R. Parhi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- open crack;
- modal parameters;
- numerical method;
- FEM.;
23.Thermal Design of Ammonia Desuperheater-Condenser and Comparative Study with HTRI

机译：氨脱糖器冷凝器的热设计与HTRI对比研究
- 作者：Shreya Sahajpal;Parin D. Shah
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Desuperheater-condenser;
- ammonia-water;
- thermal design;
- design considerations;
- HTRI;
24.Intensification of esterification reaction of lactic acid with iso-propanol using pervaporation reactor

机译：使用百发液反应器强化乳酸与异丙醇的酯化反应
- 作者：Ajit P. Rathod;Kailas L. Wasewar;Shriram S. Sonawane
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- pervaporation reactor;
- esterification;
- lactic acid;
- iso-propanol;
- experimental;
25.Studies on Degradation of Reactive Red 135 Dye in Wastewater using Ozone

机译：臭氧废水中活性红135染料降解研究
- 作者：Sandip Sharma;Jimit Buddhdev;Manish Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Advanced oxidation processes;
- Chemical oxygen demand;
- Decolorization;
- Ozonation;
- Ozone demand;
- Reactive red 135.;
26.Thermal optimization of an ice cream hardening process

机译：冰淇淋硬化过程的热优化
- 作者：Keyur C. Patel;Vikas J. Lakhera;Dilip Sarda
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Freezing time;
- ice cream hardening;
- cooling load.;
27.Enhancement of esterification reaction by pervaporation reactor: an intensifying approach

机译：通过渗透反应器提高酯化反应：加强方法
- 作者：Ajit P. Rathod;Kailas L. Wasewar;Shriram S. Sonawane
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- pervaporation reactor;
- esterification;
- lactic acid;
- n-butanol;
- experimental;
28.Evaluation of PET and PP geotextile reinforced embankment on soft soil

机译：宠物土壤PET和PP土工织物增强路堤评价
- 作者：Jigisha M. Vashi;Atul K. Desai;Chandresh H. Solanki
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Reinforced earth embankment;
- geotextile;
- numerical analysis;
- PET (polyester);
- PP (Polypropylene);
29.Numerical optimization of guide vanes and reducer in pump running in turbine mode

机译：汽轮机模式泵中导叶和减速器的数值优化
- 作者：V A Patel;S V Jain;K H Motwani
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Guidevane;
- numerical simulation;
- optimization;
- pump as turbine.;
30.Physical and Mechanical Properties of Bi-directional Jute Fiber epoxy Composites

机译：双向黄麻纤维环氧复合材料的物理和力学性能
- 作者：Vivek Mishra;Sandhyarani Biswas
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Natural fiber;
- Jute fiber;
- Epoxy;
- Mechanical Properties;
31.Liquid desiccant based solar air conditioning system with novel evacuated tube collector as regenerator

机译：基于液体干燥剂的太阳能空调系统，具有新颖的废气管收集器作为再生器
- 作者：J R Mehta;M V Rane
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- solar collector;
- liquid desiccant;
- regenerator;
- dehumidification;
- air conditioning;
32.Crack detection in cantilever beam by frequency based method

机译：基于频率的方法悬臂梁裂纹检测
- 作者：Kaushar H. Barad;D. S. Sharma;Vishal Vyas
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Crack detection;
- natural frequency;
- vibration based inspection;
- Non-Destructive Testing (NDT);
- Transverse Vibration.;
33.Cost analysis of pump as turbine for pico hydropower plants-a case study

机译：微型水电站汽轮泵成本分析 - 以案例研究为例
- 作者：K H Motwani;S V Jain;R N Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Case study;
- cost analysis;
- pico hydropower;
- pump as turbine;
- renewable energy.;
34.Influence of machining parameters on delamination in drilling of GFRP-armour steel sandwich composites

机译：加工参数对GFRP - 铠装钢夹芯复合材料钻井中分层的影响
- 作者：M.A.J.Bosco;K.Palanikumar;B. Durga Prasad
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Drilling;
- armour steel;
- sandwich composites;
- delamination;
35.Modal curvature and modal flexibility methods for honeycomb damage identification in reinforced concrete beams

机译：钢筋混凝土梁中蜂窝损伤识别的模态曲率和模态柔韧性方法
- 作者：V. B. Dawari;G. R. Vesmawala
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- modal curvature;
- modal flexibility;
- honeycomb damage identification;
- Reinforced Concrete beam;
36.Multidimensional Modeling of Direct Injection Diesel Engine with Split Multiple Stage Fuel Injections

机译：分裂多级燃料喷射直喷柴油发动机的多维建模
- 作者：Subhash Deo Hiwase;S. Moorthy;Hari Prasad
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- DI Diesel Engine;
- Split Multipie Stage Fuel Injection;
- Computational Fluid Dynamics;
- Mesh Motion;
- Two phase;
- Combustion;
37.Electro-catalytic Materials (Electrode Materials) in Electrochemical Wastewater Treatment

机译：电化学废水处理中的电催化材料（电极材料）
- 作者：Priya S Patel;Nikita Bandre;Ankita Saraf
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Electro-catalysis;
- Electro-oxidation;
- BDD;
- DSA;
- TiO2-NTs/Sb-SnO2/PbO2;
38.3D Parametric Modeling for Product Variants Using Case Study on Inner Ring of Spherical Roller Bearing

机译：用于产品变体的3D参数模型，使用案例研究在球形滚子轴承内圈
- 作者：Ruchik D. Trivedi;Dhaval B. Shah;Kaushik M. Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Parametric Modeling;
- Modeling Automation;
- Spherical Roller Bearing;
- Excel Analysis;
39.Adsorption of lead on gel combustion derived nano ZnO

机译：凝胶燃烧衍生纳米ZnO的引线吸附
- 作者：V Venkatesham;G M Madhu;S V Satyanarayana
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Nano Zinc oxide;
- Lead;
- Adsorption;
- Gel Combustion;
- Water.;
40.Thermal-structural Analysis of Electrical Discharge Machining Process

机译：电气放电加工过程的热结构分析
- 作者：Chinmaya P. Mohanty;Jambeswar Sahu;S.S.Mahapatra
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
41.Evaluation of FEM based fracture mechanics technique to estimate life of an automotive forged steel crankshaft of a single cylinder diesel engine

机译：基于FEM的骨折力学技术评估估算单缸柴油机汽车锻造钢曲轴的寿命
- 作者：Rajesh M.Metkar;Vivek K.Sunnapwar;Subhash Deo Hiwase
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Finite Element Method;
- Crack Propagation;
- Crankshaft;
- Fatigue;
- Fatigue Life Estimation;
42.Determination of Time Delay and Rate of Temperature Change during Tyre Curing (Vulcanizing) Cycle

机译：轮胎固化期间的时间延迟和温度变化率的测定（硫化）循环
- 作者：Mukund Pandya;R N Patel;SKP Amarnath
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Curing process;
- Delay time;
- SST k-ω model;
- Turbulent flow analysis.;
43.CFD Analysis of Spatial Distribution of Various Parameters in Downdraft Gasifier

机译：下降气化器中各种参数的空间分布的CFD分布
- 作者：Reran D. Patel;N.K.Shah;R. N. Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- CFD;
- Downdraft gasifier;
- Lignite gasification;
44.Design and analysis of fixture for welding an exhaust impeller

机译：用于焊接排气叶轮的夹具的设计与分析
- 作者：Jigar D Suthar;K.M .Patel;Sanjay G Luhana
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Welding;
- impeller;
- residual stress;
- fixture design;
- balancing;
45.CFD for centrifugal pumps: a review of the state-of-the-art

机译：离心泵的CFD：对最先进的综述
- 作者：S R Shah;S V Jain;R N Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Centrifugal pumps;
- CFD;
- flow analysis;
- numerical simulation;
- review.;
46.Use of Genetic Algorithm to Model Phase Equilibria of systems consisting of 3-Methylthiophene hydrocarbons

机译：遗传算法对由3-甲基噻吩和碳氢化合物组成的系统的模型相平衡
- 作者：A. Kulkarni;M. H. Joshipura
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Desulfurization;
- 3-Methylthiophen;
- Genetic Algorithm;
- NRTL;
- Wilson;
- Margules;
47.Production of synthesis gas by carbon dioxide reforming of methane over nickel based and perovskite catalysts

机译：基于镍和钙钛催化剂的甲烷二氧化碳重整生产合成气
- 作者：Sandeep K. Chawla;Milka George;Femina Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- CO2 reforming;
- perovskites;
- syngas;
- sol gel;
48.Numerical Investigation of Flow Induced Vibration for the Triangular Array of Circular Cylinder

机译：圆柱三角阵列流动诱导振动的数值研究
- 作者：Hardik R Gohel;Balkrushna A Shah;Absar M Lakdawala
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
49.Development of a Heat Conduction Model and Investigation on Thermal Conductivity Enhancement of AIN/Epoxy Composites

机译：一种导热模型的开发和AIN /环氧复合材料热导率增强研究
- 作者：Alok Agrawal;Alok Satapathy
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Polymer Composites;
- Aluminium Nitride;
- Thermal Conductivity;
- Theoretical Model;
50.Study on the catalytic properties of silica supported copper catalysts

机译：二氧化硅负载铜催化剂催化性能研究
- 作者：Manish Dixit;Manish Mishra;P.A. Joshi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- mesoporous silica;
- supported catalysts;
- solid acids;
- dehydrogenation;
- alcohols;
51.Finite Element Analysis of Double Cracked Beam and its Experimental Validation

机译：双裂梁的有限元分析及其实验验证
- 作者：Irshad A Khan;Dayal R Parhi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Natural frequency;
- Mode shape;
- Crack;
- Ansys;
52.Prediction of vapor pressure of fatty acid methyl esters

机译：脂肪酸甲酯蒸气压预测
- 作者：Parag Saxena;Jitesh C Patel;Milind H Joshipura
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Fatty Acid Methyl Ester;
- Vapor Pressure;
- Prediction Models;
- PR-EOS;
- Critical Properties;
53.Water to Nanofluids heat transfer in concentric tube heat exchanger: Experimental study

机译：同心管热交换器中纳米流体热传递的水：实验研究
- 作者：Rohit S. Khedkar;Shriram S. Sonawane;Kailas L Wasewar
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Nanofluids;
- Voluume fraction;
- Energy;
- Overrall heat transfer coeficient;
54.Adaptation to the Future Climate: A Low Carbon Building Design Challenge

机译：适应未来的气候：低碳建筑设计挑战
- 作者：Saadia Barbhuiya;Salim Barbhuiya;Hamid Nikraz
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Adaptation;
- climate change;
- carbom emissions;
- enrgy consumtion;
- mitigation.;
55.La_(1-x)Sr_xCoO3 (x=0, 0.2) perovskites type catalyst for carbon monoxide emission control from auto-exhaust

机译：LA_（1-X）SR_XCOO3（X = 0,0.2）钙钛矿型催化剂用于自动排气的一氧化碳排放控制
- 作者：Femina Patel;Sanjay Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Catalytic converter;
- Perovskite;
- Automotive emission;
- Co precipitation method;
- Synergistic effect;
56.Comparative Evaluation on Properties of Hybrid Glass Fiber-Sisal/Jute Reinforced Epoxy Composites

机译：杂交玻璃纤维 - 硅烷/黄液增强环氧复合材料性能的比较评价
- 作者：M.Ramesh;K.Palanikumar;K.Hemachandra Reddy
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
57.Comparative Study of Rectangular and Trapezoidal Microchannels Using Water and Liquid Metal

机译：用水和液态金属矩形和梯形微通道的比较研究
- 作者：Deewakar Sharma;Parbar Pratham Singh;Harry Garg
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Heat Sink;
- Liquid Gallium;
- Liquid Metal;
- Rectangular;
- Trapezoidal Microchannels.;
58.Overall Equipment Effectiveness (OEE) Calculation-Automation through Hardware Software Development

机译：整体设备有效性（OEE）通过硬件和软件开发计算自动化
- 作者：Ranteshwar Singh;Dhaval B Shah;Ashish M Gohil
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Overall Equipment Effectiveness;
- availability efficiency;
- performance efficiency;
- quality rate.;
59.Properties of self compacting concrete using recycled coarse aggregate

机译：再生粗骨料自压力混凝土的性能
- 作者：K C Panda;P K Bal
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
60.Effect of pure and binary fluids on closed loop pulsating heat pipe thermal performance

机译：纯净和二元流体对闭环脉动热管热性能的影响
- 作者：Pramod R. Pachghare;Ashish M. Mahalle
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Pulsating heat pipe;
- binary mixtures;
- heat flux;
- pure natural convection.;
61.Nonlinear Analysis of Leaf Springs of Functionally Graded Materials

机译：功能分级材料叶片簧片的非线性分析
- 作者：Dipendra Kumar Roy;Kashi Nath Saha
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Material Nonlinearity;
- Leaf Spring;
- Cantilever Beam;
- Variable Material Properties;
62.Modelling of Thrust Force during Drilling of Fibre Reinforced Plastic Composites

机译：纤维增强塑料复合材料钻井期间推力模拟
- 作者：Amrinder Pal Singh;Manu Sharma
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- thrust force;
- composite;
- drilling;
- delamination;
- state-space modelling.;
63.Crown ether bis-diazo dyes for aqueous inkjet inks by micro emulsion technique

机译：通过微乳液技术冠状醚双滴二氮杂染料用于含水喷墨油墨
- 作者：Harikrishnan K Uma;Shobhana K. Menon
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Crown ether bis-diazo dyes;
- inkjet inks;
- micro emulsion;
- nano oil droplets;
- non-covalent interactions;
64.A DEA approach for optimization of multiple responses in Electrical Discharge Machining of AISI D2 steel

机译：AISI D2钢电放电加工多重反应的DEA方法
- 作者：Jambeswar Sahu;Chinmaya P. Mohanty;S.S. Mahapatra
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- RSM;
- DEA;
- MRR;
- TWR;
- DMU;
- Relative efficiency.;
65.Ultrasonic-Assisted Extraction of Aloin from Aloe Vera Gel

机译：来自芦荟凝胶的超声波辅助萃取Aloin
- 作者：Ninad R. Jawade;Abhijeet R. Chavan
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Activation energy;
- Aloe Vera;
- Aloin;
- Diffusivity;
- UAE;
66.Effects of Granulated Blast Furnace Slag in the Engineering Behaviour of Stabilized Soft Soil

机译：粒状高炉炉渣在稳定软土工程行为中的影响
- 作者：Laxmikant Yadu;R.K. Tripathi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Granulated blast burnace slag;
- soft soil;
- soil stabilization;
- UCS;
- CBR.;
67.Deep removal of sulfur from model liquid fuels using 1-Butyl-3-Methylimidazolium Chloride

机译：使用1-丁基-3-甲基咪唑氯化物，从模型液体燃料中切除硫
- 作者：Swapnil A. Dharaskar;Kailas L. Wasewar;Mahesh. N. Varma
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Liquid fuel;
- Sulfur removal;
- Ionic liquid;
- Green technology;
68.ANALYSIS OF CFT, RCC AND STEEL BUILDING SUBJECTED TO LATERAL LOADING

机译：横向载荷的CFT，RCC和钢结构分析
- 作者：Ketan Patel;Sonal Thakkar
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Concrete-filled steel tubular column;
- Confinement effect;
- Circular cross section;
- lateral load.;
69.A trigonometric shear deformation theory for flexure of thick beam

机译：厚梁弯曲的三角剪切变形理论
- 作者：Ajay G. Dahake;Yuwaraj M. Ghugal
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Thick beam;
- trigonometric shear deformation;
- principle of virtual work;
- displacement;
- stress.;
70.FEA and Topology Optimization of 1000T Clamp Cylinder for Injection Molding Machine

机译：用于注塑机1000T夹缸的FEA和拓扑优化
- 作者：Patel Niral;Mihir Chauhan
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Clamp Cylinder;
- Finite Element Analysis;
- Injection Moulding Machine;
- Topology Optimization;
71.SINGLE STEP OXIDATION OF METHANE TO METHANOL-TOWARDS BETTER UNDERSTANDING

机译：单步氧化甲烷与甲醇 - 更好地理解
- 作者：Priyank Khirsariya;Raju K Mewada
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- methane;
- methanol;
- catalytic partial oxidation;
- gas-phase homogeneous oxidation;
- catalyst;
72.Effect of Different Patterns and Cracking in FRP Wrapping on Compressive Strength of Confined Concrete

机译：不同图案和裂缝在FRP包装中的影响施加混凝土抗压强度
- 作者：Kinjal V Ranolia;B K Thakkar;J D Rathod
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Confined Concrete;
- Fiber Reinforced Polymer (FRP);
- Finite Element Analysis (FEA).;
73.Optimization of Auxiliary Power Consumption of Combined Cycle Power Plant

机译：组合循环发电厂辅助功耗优化
- 作者：Tejas N Raval;R N Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Optimization;
- Auxiliary Power Consumption;
- Combined Cycle power plant;
- Energy Conservation;
74.Multi-objective Optimization of Electrochemical Machining of Hardened Steel Using NSGA II

机译：NSGA II的硬化钢电化学加工多目标优化
- 作者：Biswesh R. Acharya;Chinmaya P. Mohanty;S.S.Mahapatra
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
75.Optimisation of compressive strength in Zirconia nanoclusters of the Bis-GMA TEGDMA based dental composites.

机译：基于BIS-GMA和TEGDMA基牙科复合材料的氧化锆纳米团簇抗压强度的优化。
- 作者：Umesh Vishnu Hambire;Vipin Kumar Tripathi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Dental Composite;
- Zirconia;
- nanoclusters;
- compressive strength;
- filler.;
76.Decolourization and mineralization of Reactive black-5 with transition metal oxide coated electrodes by electrochemical oxidation

机译：通过电化学氧化具有过渡金属氧化物涂覆电极反应性黑-5的脱色和矿化
- 作者：Bhavna D Soni;Jayesh P Ruparelia
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Reactive black-5;
- Transition metal oxide coated electrodes;
- Decolourization;
- Batch process;
77.Evolving Sustainable Cities through the Fabric of Technological Transformation

机译：通过技术改造的结构发展可持续城市
- 作者：Santosh Kolte;Anurag Kandya;Ketan Lakhtaria
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- sustainable cities;
- carbon foot print;
- green materials;
- environmental management and climate change.;
78.Utilization of Biomass Based Fuel in a Naturally Aspirated Diesel Engine

机译：基于生物质基燃料在天然吸气的柴油机中的利用
- 作者：R.Prakash;R.K.Singh;S.Murugan
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Biofuel;
- Bio-oil;
- Biodiesel;
- Diesel engine;
- Performance;
- Emission;
79.Determination of Optimum Inventory Model for Minimizing Total Inventory Cost

机译：确定最低限度清单成本的最佳库存模型
- 作者：S.M.Samak-Kulkarni;N.R.Rajhans
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Wagner-Whitin Algorithm;
- Inventory Models;
- Inventory costs;
- LFL;
- POQ;
- EOQ;
- LTC;
- LUC;
- LPC.;
80.Predicting Temperature in Orthopaedic Drilling using Back Propagation Neural Network

机译：用反向传播神经网络预测矫形钻井的温度
- 作者：Rupesh kumar Pandey;S.S.Panda
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Orthopaedic drilling;
- Neural network;
- Osteonecrosis.;
81.Preparation and Characterization of SnO2 Thin Film Coating using rf-Plasma Enhanced Reactive Thermal Evaporation

机译：使用RF-血浆增强反应热蒸发的SnO2薄膜涂层的制备与表征
- 作者：Punit Patel;Ayyan Karmakar;Chetan Jariwala
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Conducting Glass;
- DSSC;
- Thin layer coating.;
82.Challenges in the production of hydrogen from glycerol-a biodiesel byproduct via steam reforming process

机译：通过蒸汽重整过程从甘油 - 一种生物柴油副产物生产氢气的挑战
- 作者：Kartik S Avasthi;Ravaru Narasimha Reddy;Sanjay Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Glycerol;
- Steam reforming;
- Hydrogen production;
- Biodiesel;
- Challenges;
83.Microcontroller Based Sampling and Reagent Arm used for Batch Analyzer

机译：基于微控制器的采样和试剂臂用于批量分析仪
- 作者：Sudha Ramasamy;Rajat Mishra;Padma Thiagarajan
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Analytical Plate;
- Clinical Chemistry Analyzer;
- Random Access Algorithm (RAA);
- Reagent Arm;
- Sampling Arm.;
84.Fluid-Structure-Soil Interaction Effects on Seismic Behaviour of Elevated Water Tanks

机译：流体结构 - 土壤相互作用对升高水箱抗震性能的影响
- 作者：Uma Chaduvula;Deepam Patel;N Gopalakrishnan
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Water tanks;
- Fluid-Structure-Soil Interaction;
- Seismic behaviour;
85.Adsorption of Phenol from Wastewater in Fluidized Bed Using Coconut Shell Activated Carbon

机译：使用椰壳活性炭吸附流化床废水中的苯酚
- 作者：Sunil J.Kulkarni;Ravi W.Tapre;Suhas V. Patil
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Fluidized bed;
- activated carbon;
- adsorption;
- adsordate;
- isotherms;
86.Total Productive Maintenance (TPM) Implementation in a Machine Shop: A Case Study

机译：机床中的总生产维护（TPM）实施：案例研究
- 作者：Ranteshwar Singh;Ashish M Gohil;Dhaval B Shah
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Total Productive Maintenance;
- Total Quality Mamagement;
- 5-S;
- Kaizen.;
87.Effect of number and size of recess on the performance of hybrid (hydrostatic/hydrodynamic) journal bearing

机译：凹槽数量和大小对杂交（静压/流体动力学）轴颈轴承性能的影响
- 作者：Vijay Kumar Dwivedi;Satish Chand;K. N. Pandey
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- recessed hybrid bearing;
- recess;
- oil flow capacity;
- load bearing capacity;
88.Synthesis, Characterization and Dyeing Behaviour of Heterocyclic Acid and Mordent Dyes on Wool and Silk Fabrics

机译：杂环酸缺陷对羊毛和丝织物的合成，表征和染色行为
- 作者：Hitendra M. Patel
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- heterocyclic acid dye;
- mordent acid dye;
- light fastness;
- derivatives of benzofuran;
- washing fastness.;
89.Dynamic Response Control of a Building Model using Bracings

机译：用支护型建筑模型的动态响应控制
- 作者：Dhara Panchal;Sharad Purohit
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Dynamic properties;
- Concentric-Eccentric Bracings;
- Accelerometer;
- Data Acquisition System;
- SDOF system.;
90.Wheat as a Promising Substitute of Corn for Bioethanol Production

机译：小麦作为生物乙醇生产的有前途替代品玉米
- 作者：Neha Patni;Shibu G. Pillai;Ankur H. Dwivedi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Bioethanol;
- Wheat;
- Fermentation;
- Glucose;
- Saccharomyce Cerivisiae.;
91.Effects of Randomness in Fault Rupture and in Soil and Structural Parameters on R. C. Portal Frame Response in Delhi Region

机译：随机性在德里地区R.C.门际框架响应R.C的故障破裂与土壤和结构参数的影响
- 作者：K. Satish;Hemant Shrivastava;G. V. Ramana
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Randomness;
- Fault Rupture;
- Soil Parameters;
- Structural Parameters;
- Delhi Region;
92.Effect of load height on buckling resistance of steel beams

机译：负荷高度对钢梁屈曲电阻的影响
- 作者：S.G.Morkhade;L.M.Gupta
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Load height;
- Buckling;
- monosymmetric section;
- Shear centre.;
93.Kinetic Parameter Estimation of Lignite by Thermo-gravimetric Analysis

机译：热重量分析褐煤动力学参数估计
- 作者：Vimal R Patel;Rajesh N Patel;Vandana J Rao
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- TGA;
- Kinetics;
- Lignite;
- Kinetic Parameter;
- Non-isothermal Decomposition;
94.A review on prediction of properties of biodiesel and blends of biodiesel

机译：生物柴油和生物柴油混合性能预测综述
- 作者：Parag Saxena;Sayali Jawale;Milind H Joshipura
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Biodiesel;
- Prediction Models;
- Blends of Biodiesel;
- Thermophysical;
95.Influence of porosity on the performance of a Pulse Tube Refrigerator: A CFD study

机译：孔隙率对脉管冰箱性能的影响：CFD研究
- 作者：S.K. Rout;A.K. Gupta;B.K. Choudhury
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Pulse tube Refrigerator;
- CFD;
- Regenerator;
96.Liquid-Liquid Extraction and Spectrophotometric Determination of Vanadium(V) with p-Carboxy-N-Phenyl-Calix4resorcinarene-hydroxamic Acid

机译：液液萃取和分光光度法用P-羧基-N-苯基 - 烯基钒的钒（V）测定4反霉素 - 羟肟酸
- 作者：Shibu G. Pillai;Ankur H. Dwivedi;Neha Patni
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Resorcinarenes;
- hydroxamic acid;
- liquid-liquid extraction;
- preconcentration.;
97.Analysis of Frame using Applied Element Method (AEM)

机译：应用元素法（AEM）帧分析
- 作者：Vikas Gohel;Paresh V. Patel;Digesh Joshi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Applied element method (AEM);
- Finite element method (FEM);
- Static analysis;
- Portal frame;
98.Strengthening of RC Beams subjected to Combined Torsion and Bending with GFRP Composites

机译：强化GFRP复合材料组合扭转和弯曲的RC光束
- 作者：Vishnu H. Jariwala;Paresh V. Patel;Sharadkumar P. Purohit
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Reinforced Concrete beam;
- Fiber reinforced polymer composite;
- Torsion;
- Bending;
99.Development of rate expression for glycerol hydrogenation reaction

机译：甘油氢化反应率表达的发展
- 作者：Bharat N Chatwani;Raju K Mewada
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Hydrogenation;
- Rate constant;
- Glycerol;
100.Modeling of relative length and relative energy loss of free hydraulic jump in horizontal prismatic channel

机译：水平棱柱径自由液压跳跃相对长度和相对能量损失的建模
- 作者：Sanjeev Kumar Gupta;R. C. Mehta;V. K. Dwivedi
- 会议名称：《Nirma University International Conference on Engineering》 | 2013年
- Hydraulic jump;
- Energy dissipation;
- Prismatic Channel;
- Irrigation;
- Supercritical flow;
- etc.;