首页>外文会议>International conference on physical and numerical simulation of material processing;ICPNS2010

International conference on physical and numerical simulation of material processing;ICPNS2010

召开年：2010
召开地：Guilin(CN);Guilin(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Analysis on the critical buckling stress in the TC4 thin plate weldment

机译：TC4薄板焊件的临界屈曲应力分析
- 作者：Qi Xiuling;Zhang Yong
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- critical buckling stress;
- TC4 thin plate;
- welding longitudinal residual stress;
2.2.5D FEM study and optimization of roll pass design in roughing mill group

机译：粗轧机组2.5D有限元分析和辊道设计优化
- 作者：Sergey A. Aksenov;Irina V. Logashina;Eugene N. Chumachenko;M. Kotas
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- industrial hot rolling;
- 2.5D FEM;
- computer simulation;
- optimization;
- roll pas design;
3.Mismatch Simulation of Motion Detection Pointing Device

机译：运动检测定点设备不匹配仿真
- 作者：Bing Mo;Qi Zheng;Sihao Chen;Suki Kim
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- mismatch;
- offset voltage;
- monte carlo method;
4.Investigation on Joining Mechanism of SiC Particle Reinforced Aluminum Matrix Composite (Al/SiCp-MMC) by Resistance Spot Welding

机译：电阻点焊研究SiC颗粒增强铝基复合材料（Al / SiCp-MMC）的结合机理
- 作者：Xingrui LI;Wenbo TANG;Jitai NIU
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- SiC particle reinforced aluminum matrix composite;
- resistance spot welding;
- joining mechanism;
5.Study on Manufacturing Process and Applying of Galvalume

机译：Galvalume的制造工艺及应用研究
- 作者：Meng Song;Yunli Feng;Jingbo Yang
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- galvalume;
- process;
- microstructure;
- properties;
6.Study on the Section Inhomogeneity of VN Microallyed Heavy Plate during Controlled Rolling

机译：VN微厚板控制轧制过程中截面不均匀性的研究
- 作者：Li Nan
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- heavy plate;
- VN microalloying;
- section effect;
- finite element method;
7.Numerical Simulation of Spinodal Deposition in Cu-6at.Ni-3at.Si Ternary Alloy Using of Phase-Field Method

机译：相场法数值模拟Cu-6at％Ni-3at％Si三元合金中的旋节线沉积
- 作者：LONG Yong-qiang;LIU Ping;LIU Yong;JIAO Shu-guo;TIAN Bao-hong
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- Cu-Ni-Si alloys;
- spinodal decomposition;
- phase-field model;
- numerical simulation;
8.Study on Organization and Properties of the new wear-resistant steel

机译：新型耐磨钢的组织性能研究
- 作者：LI Ningbo;XIE Jingpei;WANG Wenyan
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- new wear-resistant steel;
- mechanic properties;
- friction wear;
9.A Study on Mathematical Model of Deformation Force for Tube Nosing with Conical Die

机译：圆锥模头冲头变形力的数学模型研究
- 作者：Liang CHU;Qingwei WANG;Yan BI;Dasen BI
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- tube nosing deformation force;
- slab method;
- work-hardening;
- mathematical model;
10.Coupling Analysis on Hydrauic Press and Forming Moulds of the Containment of Nuclear Power Reactor

机译：核动力堆安全壳水压机与成型模具的耦合分析
- 作者：Dasen BI;Yaodong ZHOU;Liang CHU
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- coupling analysis;
- hydraulic press;
- mould;
- equipment;
11.Finite Element Simulation of the Nosing Process of Metal Tubes with a Conical Die

机译：锥形模具金属管注口过程的有限元模拟
- 作者：Liang CHU;Lijun SHI;Yan BI;Dasen BI
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- tube nosing process;
- finite element simulation;
- material thickness variation;
12.Numerical Simulation and Analysis on Bending Forming of Hull Plate

机译：船体板弯曲成形的数值模拟与分析
- 作者：Linlin LUO;Dasen BI;Yan BI;Liang CHU;Xu MA;Jianping LI;Hongshuang DI
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- hull plate;
- bending process;
- FEM;
13.Numerical Simulation on spinning forming process of automotive wheel rim

机译：汽车轮辋旋压成型过程的数值模拟
- 作者：Dasen BI;Guang YANG;Liang CHU;Jian ZHANG;Zhihua WANG
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- automotive wheel;
- rim;
- spinning process;
- numerical simulation;
- DEFORM-3D;
14.The Microstructure and Formability Study on DP Steel of Lightweight Automobile

机译：轻型汽车DP钢的组织与成形性研究
- 作者：Jin WU;Dasen BI;Liang CHU;Jian ZHANG;Yuntao LI
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- ultralight automobile;
- formability;
- dual phase steel;
- high strength low alloy steel;
15.Numerical Simulation of the Stamping Forming Process Of Alloy Automobile Panel

机译：合金汽车板冲压成形过程的数值模拟
- 作者：Jian Zhang;Yulin NING;Bendong PENG;Zhihua WANG;Dasen BI
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- 6061 alloy;
- formability;
- deck lid outer panel;
- dynaform;
- auto panel;
16.FEM dynamic analysis of continuous rolling pass of seamless tubes

机译：无缝管连续轧制过程的有限元动力学分析
- 作者：Zhilong FENG;Xu MA;Jingyun MA;Xiaoyu ZHOU;Huiqiang LIU;Yanhong DING;Jianping LI
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- seamless tube;
- continuous rolling;
- grooves;
- explicit dynamics;
- finite elements simulation;
17.The Effect of Bell-type annealing temperature on the mechanical properties of SPCC cold-rolled steel sheet

机译：钟型退火温度对SPCC冷轧钢板力学性能的影响
- 作者：Zhihua Wang;Yanping zhao;Yuntao li;Xianghua liu
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- microstructure mechanical properties bell-type annealing SPCC cold-rolled steel sheet;
18.Research on Air Quantitative Prediction Based on Mold Filling Simulation of High Pressure Die-casting

机译：基于高压压铸充模模拟的空气定量预测研究
- 作者：ZHOU Jianxin;LIU Xin;CHEN Liliang;CHEN Yang;ZOU Fei;LIAO Dunming;LIU Ruixiang
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- air quantitative prediction;
- HZCAE;
- high pressure die-casting;
- numerical simulation;
- mold-filling process;
19.Numerical simulation of eccentric extrusion form bending pipe parts

机译：弯曲管件偏心挤压的数值模拟
- 作者：Jishun SONG;Yuntao LI;Deheng DU;Xu MA;Kang YIN
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- finite element analysis;
- extrusion bending;
- one step forming;
- flow control;
- eccentric extrusion;
20.Formability of Tailor-Welded Blanks for Steel with Different Thickness and Materials

机译：不同厚度和材料的钢制拼焊板的可成形性
- 作者：Yuntao LI;Juan YE;Jishun SONG;Jian ZHANG;Guangda Liu
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- different thickness;
- different materials;
- tailor weld blanks;
- microstructure;
- formability;
21.Study on Welding of TIG Tailor Welded Galvanized Sheets and Formability of Stretch Forming

机译：TIG裁缝焊接镀锌板的焊接及拉伸成形性研究
- 作者：Yuntao LI;Wenjun ZHANG;Xu MA;Guangda Liu;Lijun YANG
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- TIG welding;
- tailor welded-galvanized sheets;
- microstructure;
- stretch formability;
22.Finite element analysis of transient welding stress and strain during Ti-6Al-4V thin plate welding with impact rotation

机译：冲击旋转Ti-6Al-4V薄板焊接过程中瞬态焊接应力和应变的有限元分析
- 作者：ZHANG Yong;YANG Jianguo;LIU Xuesong;FANG Hongyuan
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- finite element analysis (FEA);
- Ti-6Al-4V;
- thin plate weldment;
- wave-like deformation;
- residual stress;
23.Study on Fast-convert Ultrasonic Frequency Pulse TIG Welding Arc Characteristic

机译：快速转换超声波脉冲脉冲氩弧焊电弧特性的研究
- 作者：Qi Bojin;Yang Mingxuan;Cong Baoqiang;Li Wei
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- ultrasonic frequency pulse TIG welding;
- pulse level parameters;
- welding characteristic;
24.Microstructure and Performance of Fe-based Composite Clad Layer Fabricateded by Submerged-arc Welding Added Alloy Powder

机译：埋弧焊添加合金粉制备的铁基复合熔覆层的组织与性能
- 作者：Limei WANG;Junbo LIU;Chi YUAN
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- alloy powder;
- submerged -arc welding;
- TiC;
- clad layer;
- performance;
25.Study on the Ball Joint Sealing of Aluminium Control Arms

机译：铝制控制臂球头密封的研究
- 作者：TIAN Haobin;LIU Xiaohang;YU Zhongtu
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- ball joint sealing;
- revolving-reveting technology;
- aluminium control arm;
26.Virtual optimization of regulating and controlling on welding residual stress of Francis turbine runner

机译：混流式水轮机转轮焊接残余应力调控的虚拟优化
- 作者：Ji Shude;Liu Xuesong;Yang Jianguo;Liu Zhenlei
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- blade;
- subsection welding;
- local heating;
- welding residual stress;
27.The effect of hybrid ultrasonic pulse current parameters on VPTIG arc pressure and weld formation

机译：混合超声脉冲电流参数对VPTIG电弧压力和焊缝形成的影响
- 作者：Qi Bojin;Li Wei;Cong Baoqiang;Yang Mingxuan
- 会议名称：《International conference on physical and numerical simulation of material processing;ICPNS2010》 | 2012年
- hybrid ultrasonic pulse;
- variable polarity;
- arc pressure;