首页>外文会议>The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集

The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集

召开年：2009
召开地：Beijing(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Studies on Multibody Model of Projectile-Gun Coupling System

机译：弹-炮耦合系统多体模型研究
- 作者：Lei LIU;Guolai YANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Dynamics;
- contact;
- projectile;
- barrel;
- coupling;
2.Study on a Novel Position Sensor

机译：新型位置传感器的研究
- 作者：Xinxin SHI;Siqin CHANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Linear position sensor;
- AS5304;
- High speed;
- High resolution;
3.Study on Ablation Mechanism of Carbon-phenolic Nozzle

机译：碳酚喷嘴的烧蚀机理研究
- 作者：Tianbo WANG;Changsheng ZHOU;Shaojuan WANG;Honggang CHENG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- carbon-phenolic nozzle;
- ablation mechanism;
4.Study on Control Design for Linear Transfer Matrix Method of Controlled Multibody System

机译：受控多体系统线性传递矩阵法控制设计研究
- 作者：Fufeng YANG;Xiaoting RUI;Lei MA;Junyi HE
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Transfer matrix method of multibody system;
- control;
- design;
5.Dynamic Analysis and Control on Hunting Stability for High-speed Railway Vehicle

机译：高速铁路车辆行进稳定性的动力学分析与控制
- 作者：Xinna MA;Shaopu YANG;Yujing SHI;Yingxin HU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- MR damper;
- on-off control;
- hunting stability;
- railway vehicle;
6.Dynamic Measuring Method of Vehicle Wheel Alignment Parameters

机译：车轮定位参数的动态测量方法
- 作者：Yongneng XU;Shufang LIU;Siqin CHANG;Chenghui CHEN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Wheel alignment parameters;
- Satisfaction criterion model;
- Genetic algorithm;
7.Effect of Rolling Rhythm on Hot Strip Profile

机译：轧制节奏对热轧带钢型材的影响
- 作者：Xingdong LI;Lipo YANG;Changhong GUO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- rolling rhythm;
- strip profile;
- thermal deformation;
- control volume balanced method;
- tilt;
8.Finite element analysis for the static and dynamic characteristics of roller of high pressure grinding roll

机译：高压磨辊磨辊静态和动态特性的有限元分析
- 作者：Nuo BAO;Fang ZHAO;Weiliang SUN;Xiangbo ZE
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- high pressure grinding roll;
- roller;
- modal analysis;
- COSMOS Works;
- the finite element;
9.25 Years of Boat Design in Industrial Design at Coventry University

机译：考文垂大学工业设计中的船舶设计25年
- 作者：Sean MCCARTAN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Industrial Design;
- Boat Design;
- Sustainability;
- Ergonomics;
- Aesthetics;
10.A Brief Discussion on Impacts of Technology on the Development of Art Design

机译：浅谈技术对美术设计发展的影响
- 作者：Shan ZENG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Art design;
- Technology;
- Science;
- History.;
11.A View of Innovation Design Methods

机译：创新设计方法论
- 作者：Yang QIAO;QiJun DUAN;Zhan WANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- design methods;
- Bio-design;
- form modularization and structure transformation;
- simulation scenes'analysis;
12.Analysis of Humanistic Design of Urban Street Furniture in China

机译：中国城市街道家具的人性化设计分析
- 作者：Donglei WU;Ruihua XU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- street furniture;
- humanistic;
- problem;
- meditation;
13.NURBS Solid Model for the Cylindrical Helix End Milling

机译：NURBS圆柱螺旋立铣刀的实体模型
- 作者：Xiongying PU;Weijun LIU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Helix curve;
- End milling;
- NURBS Solid Model;
- CAD;
14.Transverse Vibration of a Simply Supported Beam Under a High Speed Moving Mass

机译：高速移动质量作用下简支梁的横向振动
- 作者：Juan WANG;Hongsheng HU;Suxiang QIAN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Transverse vibration;
- moving mass;
- simply-supported beam;
- dynamic response;
15.Tribological Properties of Hybrid Kevlar/PTFE Fabric CompositeFilled with Nano-Si02

机译：纳米SiO2填充的凯夫拉纤维/ PTFE杂化织物复合材料的摩擦学性能
- 作者：Shijun HUANG;Yulin YANG;Dalei ZU;Ruijun ZHANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Fabric composite;
- Nano-SiO2;
- Friction;
- Wear;
- Self-lubricating bearing;
16.Um12.0 Features for Compatibility with Express Language in Cad/Cam Software Data Modeling

机译：Um12.0功能与Cad / Cam软件数据建模中的Express Language兼容
- 作者：Omid Fatahi Valilai;Mahmoud Houshmand;Iman Fatahi Valilai
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- UML2.0;
- CAD;
- CAM;
- ISO 10303 (STEP);
- EXPRESS language;
17.Using Coriolis Inertia Force to Accelerate Particle for Energy Saving in Comminution

机译：利用科里奥利惯性力加速颗粒以节省能源
- 作者：Guoming HU;Hui WAN;Liping LIU;Yu LIU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Coriolis Inertia Force;
- Rotor Impact Mill;
- Grinding;
- Comminution;
- Collinear Collision;
18.Numerical Simulation of Flow in the Afterburning Chamber of Unchoked Solid Rocket Ramjet

机译：非节流固体火箭冲压发动机加力燃烧室内流动的数值模拟
- 作者：Guoqiang ZHU;Changsheng ZHOU;Yutao JU;Honglei MENG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Ramjet;
- Air inlet angle;
- Secondary combustion;
- Combustion efficiency;
19.Prediction of Patterned Tire Contact Pressure Distribution with the Case of Cornering

机译：转弯情况下轮胎花纹接触压力分布的预测
- 作者：Guang ZENG;Ziran LI;Yuanming XIA
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Radial tire;
- Tire tread patterns;
- Contact Pressure Distribution;
- Cornering;
- Finite element analysis;
20.The Relationship between Subway Sign System and Image of City

机译：地铁标志系统与城市形象的关系
- 作者：Zhan WANG;Qijun DUAN;Yang QIAO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Subway;
- sign system;
- Image of city;
21.Research on Squeak Suppression of Autobody Structure by Modifying Opening-stiffness

机译：通过改变开口刚度来抑制车身结构的吱吱声的研究
- 作者：Yiwen LI;Tao XU;Hao ZHANG;Qiang LI;Ruichuan LI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- BIW;
- Squeak;
- Opening-stiffnesss;
- Strain-energy-density;
- Relative sensitivity;
22.The Ecological Prospects of Chinese Bamboo Design

机译：中国竹设计的生态前景
- 作者：Aihong ZHANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- bamboo culture;
- bamboo design;
- innovative R D;
- ecological prospects;
23.The Role and Efficacy of Kansei Assessment for Public Spaces Design:A Case Study of Chinese,Korean and Japanese Railroad Stations

机译：Kansei评估在公共空间设计中的作用和功效：以中，韩，日火车站为例
- 作者：Haruka SOGABE;Yoshitsugu MORITA;Kengo SAEKI;Shinsuke ISHIBASHI;Xi ZHANG;Min LI;Ji-young YOON
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Public Space Design;
- Evaluation;
- Station;
- East Asia;
24.Nurture Students' Creativity in the New City Universities

机译：在新城市大学中培养学生的创造力
- 作者：Fuchun SUN;Xiaxia GONG;Bin WU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Creativity;
- Practice;
- City university;
- Education;
25.The Model of Problem of Particle Elastic Impact and Its Finite Difference Method

机译：粒子弹性冲击问题的模型及其有限差分方法
- 作者：Hongbing ZHANG;Siyuan BAO;Yongkang ZHANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- elastic impact;
- the finite difference method;
- free vibration;
- dynamic response;
26.The Preliminary Researches on Heat Transfer Analysis and Structure Optimization of the Composite Material Barrel

机译：复合材料筒体传热分析与结构优化的初步研究
- 作者：Qijun WU;Lei HE;Junsong LI;Xueying HUANG;Kedong ZHOU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Composite material;
- FEM;
- Weight reduction;
- Structure optimization;
27.The Research on Gun Vibration Characteristic Analysis Based on Wavelet

机译：基于小波的枪炮振动特性分析研究
- 作者：Qiang CHEN;Guolai YANG;Zhangqing ZHU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Vibration;
- gun dynamic;
- wavelet;
- time-domain and frequency-domain analysis;
28.The Stress Analysis to Main Steam Pipe Bends Based on Finite Element Method

机译：基于有限元法的主蒸汽管道弯曲应力分析
- 作者：Yanting FENG;Zuguo ZHANG;Xiaoguang NIU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- main steam pipe bend;
- finite element method;
- stress;
- CAESAR II;
29.An Advanced Multibody Model for the Analysis of Motorcycle Dynamics

机译：用于分析摩托车动力学的高级多体模型
- 作者：V.COSSALTER;G.Dalla TORRE;R.LOT;M.MASSARO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- two-wheeled vehicle;
- multibody;
- tire;
- rider;
30.Analysis on the Optimum Distribution of Gear Drive

机译：齿轮传动的最佳分配分析
- 作者：Yan LI;Yingcai YUAN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- gear reliability;
- fatigue strength;
- fatigue stress;
- optimum distribution;
31.CAN Communication Modeling Based on FSM for Vehicle Integrated Chassis Control

机译：基于FSM的汽车集成底盘控制CAN通讯建模。
- 作者：Ning SUN;Nan CHEN;Jinxiang WANG;Dawei PI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- CAN;
- communication modeling;
- vehicle;
- chassis;
- integrated control;
32.Design of Exciting Signal Source for a New Amorphous Alloy with Stress-impedance Effect

机译：具有应力阻抗作用的新型非晶合金的激励信号源设计
- 作者：Rong PEI;Xiongzhu BU;Yu BAI;Xiaojun SHI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- stress-impedance;
- amorphous alloy;
- Fe73.5Cu1Nb3Si13.5B9;
- exciting signal source;
33.Developing Controller Performance Using Model-Based Design and Rapid Controller Prototyping Techniques

机译：使用基于模型的设计和快速控制器原型开发技术来开发控制器性能
- 作者：A.Y.Maxi;S.M.Wasfy;S.M.Sharaf;M.I.Ghobrial;E.Y.Akl
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Co-Simulation;
- Real-time Simulation;
- Rapid Control Prototyping;
- xPC Target Box;
- PI controller;
- Hardware in the loop;
34.Dynamic Generated Computer Aided Process Planning

机译：动态生成的计算机辅助过程计划
- 作者：C.Bhagyanathan;M.Muni Prabaharan
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Graphical User Interface;
- Multivariate;
- Ant Colony Algorithm;
- Dynamic Variant process Planning;
- Constraints;
35.Dynamic Load Analysis of Forging Manipulator during the Whole Forging Stroke

机译：整个锻造行程中锻造机械手的动态载荷分析
- 作者：Gang LI;Wenjie SUN;Deshi LIU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- forging manipulator;
- press;
- vibration;
- dynamic simulation;
36.Fabrication and Measurement of the Vitreous Micronozzle for Noncontact Spotting

机译：用于非接触式点样的玻璃体微喷嘴的制备和测量
- 作者：Xin GENG;Liya HOU;Weiyi ZHANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Micronozzle;
- Microscopic measurement;
- Noncontact spotting;
37.Fundamental Study on Micro-Actuators Driven by Liquid Crystalline Backflow

机译：液晶回流驱动微执行器的基础研究
- 作者：Chunbo LIU;Tomohiro TSUJI;Shigeomi CHONO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Micro-actuator;
- Liquid crystal;
- Backflow;
38.Improved Reconstruction Algorithms Based on BP Network for Electrical Capacitance Tomography

机译：改进的基于BP网络的电容层析成像重建算法
- 作者：Guofu QIU;Yuqin ZHANG;Xue LI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Imaging Region Segmentation;
- ECT system;
- BP network algorithm;
39.Release Model and Characteristics of Biodegradable Implantable Drug Delivery System with Micro-porous Structure

机译：具有微孔结构的可生物降解植入药物释放系统的释放模型和特性
- 作者：Yang GAO;Xiaopeng WANG;Tianning CHEN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- micro-porous;
- PLGA;
- time-varying diffusion coefficient;
- FEM;
- release model;
- simulation;
40.The Influence of Magnetic Field Distortion to Rotor Position Estimation Based on High-frequency Signal Injection

机译：基于高频信号注入的磁场畸变对转子位置估计的影响
- 作者：Hui WANG;Xin QI;Changsong WANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- high-frequency-signal injection;
- negative-sequence component;
- magnetic field distortion;
41.The Transition Matrix Formalism for the Scattering of a Buried Pipeline in an Elastic-Half Space

机译：弹性半空间中地下管道散射的过渡矩阵形式主义
- 作者：Wen-I LIAO;Jenn-Shin HWANG;Shiang-Jung WANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Transition matrix;
- Betti's identity;
- Scattering;
- plane wave;
42.The U-D Design on the Pneumatic Turbine System of Mine Pneumatic Pump

机译：矿用气泵汽轮机系统的U-D设计。
- 作者：Xiaoling WEI;Qiang ZHAO;Kai WANG;Xun LIU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- mine pneumatic pump;
- pneumatic turbine system;
- U-D design;
43.Theoretical and Numerical Analysis on Roughness Effect in a Micro-fluidic System

机译：微流控系统中粗糙度效应的理论和数值分析
- 作者：Dongxing DU;Yingge LI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Theoretical and numerical analysis;
- roughness effect;
- microtube;
- flow characteristics;
44.Using Ultrasonic and Infrared Sensors for Measuring Distances

机译：使用超声波和红外传感器测量距离
- 作者：Tarek Mohammad
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Distance Measurement;
- Infrared sensor;
- Ultrasonic sensor;
- Surface properties;
45.A New Method for the Measuring of Tracked Vehicle's Running Road

机译：履带车辆行驶道路测量的新方法
- 作者：Zhiqiang LI;Jisheng MA;Xin SHU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- running road;
- measuring method;
- angle of torsion;
- predesigned road;
46.A Passive Vibration Suppression Technique for Turbopump

机译：涡轮泵的被动振动抑制技术
- 作者：Bin LI;Changhua DENG;Feng LI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Particle damping;
- Turbopump;
- Vibration reduction;
47.Analysis on Influence of Shimmy by Steering System

机译：转向系统对摆摆的影响分析
- 作者：Peng JI;Guohua CUI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- shimmy;
- dynamic simulation;
- steering system;
- key characters;
48.A State of the Art Review on Regenerative Vehicle Active Suspension

机译：蓄能式车辆主动悬架的最新技术回顾
- 作者：Yongchao ZHANG;Fan YU;Kun HUANG
- 会议名称：《》 | 2009年
- Vehicle active suspension;
- Vibration control;
- Energy regeneration;
- Electromagnetic suspension;
49.A Study of Mechanical Behaviors of Polyurethane-coated Fabrics under Trapezoidal Tearing Loadings

机译：梯形撕裂载荷下聚氨酯涂层织物的力学行为研究
- 作者：Zhilan ZHAN;Yihua DI;Yiren CHEN;Lina XIONG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Polyurethane coated fabrics;
- Trapezoidal tearing method;
- Tearing strength;
- Finite element Orthotropy;
50.An Interpretative Model of G-G Diagrams of Racing Motorcycle

机译：赛车摩托车G-G图的解释模型
- 作者：Francesco BIRAL;Roberto LOT
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- motorcycle;
- racing;
- rider;
- theoretical model;
- g-g diagrams;
51.Calculation for Soot Source Terms in Non-premixed Turbulent Flame

机译：非预混湍流火焰中烟尘源项的计算
- 作者：Yongfeng LIU;Hongseng TIAN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Calculation;
- fluid dynamics;
- Soot source terms;
- Soot spatial distributions;
- Non-premixed Turbulent combustion;
52.Characteristics of Pressure Wave Induced by High Speed Trains' Meeting in Open Environment

机译：开放环境下高速列车相遇引起的压力波特性
- 作者：Yuxuan ZHANG;Huangwei ZHANG;Songping WU;Baole WEN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- high speed train;
- trains' meeting;
- pressure wave;
53.Control of the Interior Low Frequency Noise of the Vehicle

机译：车辆内部低频噪声的控制
- 作者：Yan ZHANG;Yanyan ZUO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- modal analysis;
- finite element;
- sound-vibration coupling;
- vibration control;
54.Engineering Computation of Compaction Pressure for Magnesium Alloy Wheel by Direct Squeeze Casting

机译：镁合金轮毂直接挤压压制压力的工程计算
- 作者：Fuqiang YING;Xinfa YING;Hongqiang TANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- engineering computation;
- compaction pressure;
- magnesium alloy wheel;
- squeeze casting;
- ProCAST;
55.Enhancement of Anisotropic Magnetoresistance in Ni81Fe19 Thin Film by Co33Cr67 Buffer Layer

机译：Co33Cr67缓冲层增强Ni81Fe19薄膜的各向异性磁阻
- 作者：Zhiming WANG;Haojie LI;Zhang HE;Qingyu XU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- anisotropic magnetoresistance;
- Ni81Fe19 film;
- and high-resolution electron microscopy;
56.Evaluation of Transient Temperature Fields for High-Pressure Steam Turbine Rotor

机译：高压蒸汽轮机转子的瞬态温度场评估
- 作者：Feng YANG;Longqing HOU;Pinghua YI;Jianbao WANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- steam turbine;
- temperature field;
- finite element;
- rotor;
57.Experimental Assessment of Mechanical Properties of Carbon Epoxy Composite Irradiated by Laser

机译：激光辐照碳环氧复合材料力学性能的实验评估
- 作者：Ming CHEN;Lianchun LONG;Zhong ying CHEN;Shibing LIU;Yongguang HUANG;Zhiguang YANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- composite;
- laser;
- epoxy resin;
- mechanical properties;
58.Experimental Research on the Unsteady Characteristic of Cavitating Flow

机译：空化流动非定常特性的实验研究
- 作者：Jiazhong ZHANG;Jing ZHAO;Yingjie WEI;Kaiping YU;Hailong HUANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- supercavitation;
- cavitating flow;
- water tunnel;
- unsteady characteristic;
59.Experimental Studies on the Heat Transfer Coefficient of Two Phase Flow in Microchannels

机译：微通道两相流传热系数的实验研究
- 作者：Dongyao LIU;Xiaoguang XU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Microchannels;
- Evaporation;
- Two phase flow;
- Heat Transfer coefficient;
- Experiment study;
60.Study on Rail Damage Mechanism and Maintenance Technology of Heavy-haul and High-speed Railway

机译：重载高速铁路轨道损伤机理及维修技术研究
- 作者：Wenjian WANG;Jun GUO;Qiyue LIU;Xuesong JIN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Heavy-haul railway;
- High-speed railway;
- Rail damage;
- Maintenance technology;
61.Study on Seismic Performance of RC Beam Bridges under Strong After-shock

机译：强震后钢筋混凝土梁桥的抗震性能研究
- 作者：Wensheng DING;Hua ZANG;Yuping KAN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- seismic;
- after-shock;
- seismic performance;
- damage index;
- RC Beam Bridges;
62.Study on the Deformation Rule of Concrete Pavement Under Explosive Loading

机译：爆炸荷载下混凝土路面变形规律研究
- 作者：Jinlong WANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- numerical calculation;
- high explosive;
- ALE algorithm;
- JWL state equation;
63.Study on the Equipment Life Evaluation System of Mining Machinery

机译：矿山机械设备寿命评估系统研究
- 作者：Hunju LIU;Yiliang WANG;Zhaojian YANG
- 会议名称：《》 | 2009年
- Mining machinery equipment;
- Life evaluation;
- Theoretical system;
- Target system;
64.Study on the Influences of Ignition Position on the Formation of Shaped Charge with Double-Layer Spherical Segment Liners

机译：双层球形节段衬里点火位置对异形装药形成的影响研究
- 作者：Yu ZHENG;Xiaoming WANG;Wenbin LI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- shaped charges;
- tandem;
- explosively formed projectile;
- ignition position;
65.The Analytical Forms of the Quadrilateral Element of Plane Stress Problems Using Mathematica

机译：基于Mathematica的平面应力问题四边形单元的解析形式。
- 作者：Siyuan BAO;Yongkang ZHANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Mathematica;
- stiffness matrix;
- explicit form;
66.Stochastic Description of a Slender Cantilever Beam Carrying a Lumped Mass Axially Excited by a Shaker

机译：细长悬臂梁承载振动器轴向激发的肿块的随机描述
- 作者：Zhihua FENG;Xiangjun LAN;Xiaodong ZHU;Hong LIN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Cantilever beam;
- nonlinear dynamics;
- Stochastic jump;
- Stochastic and bifurcation;
67.Strength Analysis of Tractor Safety Cab

机译：拖拉机安全驾驶室强度分析
- 作者：Liang HE;Qingchun SHI;Sihong ZHU;Hongling ZHU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Tractor cab;
- Strength analysis;
- ROPS;
- Non-linear finite element method;
- OECD code;
68.Study on Dynamic Stress Intensity Factors of Thick-walled Cylinders Subjected to Impulsive Pressure in Weight Function Method

机译：重量函数法研究脉动压力作用下厚壁圆筒的动态应力强度因子
- 作者：Aijun CHEN;Dingguo ZHANG;Lianfang LIAO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- thick-walled cylinder;
- cracks;
- dynamic stress intensity factors;
- weight function;
- Bessel function;
69.The Axial Compressive Strength of Concrete Filled CFRP-Steel Tube Long Columns Based on Unified Strength Theory

机译：基于统一强度理论的CFRP-钢管混凝土长柱的轴向抗压强度
- 作者：Shanshan SUN;Xueying WEI;Haibing XIAO;Junhai ZHAO;Jixiu WANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- engineering design;
- unified strength theory;
- concrete filled CFRP-steel tube;
- ultimate load-bearing capacity;
70.The Correlation Between 45 Steel Fatigue Test and Tangential Components of MMM Signals

机译：45号钢疲劳试验与MMM信号切向分量的相关性
- 作者：Shuai ZHAO;Minqiang XU;Jiancheng LENG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Metal magnetic memory test;
- fatigue damage;
- frequency of load;
71.The Design and Calculation of the Contactless Token Vending Module

机译：非接触式令牌售卖模块的设计与计算
- 作者：Guozhu NIU;Chunmei LI;Zhongjun YOU;Jian MAO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Contactless token vending module;
- Mechanical design;
- Simulation;
- Elastic coefficient;
72.The Flow and Heat Transfer of Power-law Fluid over a Rotating Disk

机译：幂律流体在转盘上的流动和传热
- 作者：Chunying MING;Liancun ZHENG;Xinxin ZHANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Rotating disk;
- Non-Newtonian fluid;
- Heat transfer;
- Similarity transformation;
- Multi-shooting method;
73.The Design and Numerical Simulation Study of Gas Generator Sealing Device

机译：燃气发生器密封装置的设计与数值模拟研究
- 作者：Honggang CHENG;Changsheng ZHOU;Tianbo Wang;Cuige DONG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Solid rocket ramjet engine;
- Dual Inlet Side Dump;
- flow field;
- sealing;
74.The Design and Optimization of Diversion Device in Bending Pipes

机译：弯管分流装置的设计与优化
- 作者：Lanying WU;Yong WEI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- bending pipes;
- diversion device;
- liquidity;
- pressure field;
75.The Effect of Shell Configuration on the Formation of Multimode Penetrators

机译：壳结构对多模侵彻器形成的影响
- 作者：Weibing LI;Xiaoming WANG;Wenbin LI;Yu ZHENG;Huizi LI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
76.The Empirical Survey on the Effect of Using Media in Explosive Forming of Tubular Shells

机译：管状壳体爆炸成形中使用介质效果的实证研究
- 作者：V.Hadavi;J.Zamani;A.Mozaffari;A.Zamiri
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Explosive Forming;
- Tubular Shell;
- Energy Conveying Medium;
77.The Equipment Design for the Nitridation and Decarbonization of Grain-Oriented Silicon Steel

机译：取向硅钢的氮化和脱碳设备设计
- 作者：Ruoping WANG;Jing LIU;Wenmin SHI;Xiangxin WANG;Guang XU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- oriented silicon steel;
- decarbonization and nitriding equipment;
- independent atmosphere;
- funnel;
78.The Experimental and Numerical Studies on the Penetrating into Concrete Targets with Kinetic Energy Projectiles

机译：动能弹丸侵彻混凝土靶的实验与数值研究
- 作者：Minrong HUANG;Xiaohui GU;Yonghong GAO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Mechanics of explosion;
- Penetration;
- Concrete;
- Numerical simulation;
79.The Influence of Driving Force Distribution on 4WID EV's Steering Performance

机译：驱动力分配对4WID EV转向性能的影响
- 作者：Minghui ZHAO;Liandong WANG;Wenjuan WANG;Yun ZHAO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- 4WID EV;
- Driving force distribution;
- Slip ratio;
- Steering experiment;
- Simulation;
80.The Influence of Wearing Time on the Tribology Characteristic of the Cast Iron-cast Iron Friction Pair in the Self-repairing Additive

机译：磨损时间对自修复添加剂中铸铁铸铁摩擦副的摩擦学特性的影响
- 作者：Yanhong YAN;Yulin YANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Self-repairing additive;
- Wearing time;
- Cast iron-cast iron friction pair;
- Frictional wear characteristics;
81.The Introduction and Usage of Hydra Model in Investigation of Storm Drain Systems Function

机译：Hydra模型在雨水排放系统功能研究中的介绍和使用
- 作者：B.Amirataee
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Storm Drain;
- HYDRA;
- WMS;
- Simulation;
82.The Latest Development of Research on Bumpy-Ridge Technology Applied to Heavy Equipment

机译：重型设备凸凹技术的研究最新进展
- 作者：Haoran ZHANG;Yongnian YAN;Renji ZHANG;Feng LIN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Bumpy-ridge;
- heavy equipment;
- weak-bonding;
- friction;
- development;
83.The Study for the Temperature Responses of the Through Plate-truss Composite Girder

机译：板桁组合梁的温度响应研究。
- 作者：Yuji CHEN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- the through plate-truss composite girder;
- temperature changes;
- spline function;
- allotting point method;
- slip and shear lag;
84.The Test Study on the Coupler Stability Under the Longitudinal Force

机译：纵向力作用下耦合器稳定性的试验研究
- 作者：Junjie YANG;Quanbao FENG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- heavy-haul;
- longitudinal force;
- coupler;
- stability;
- test;
85.Theoretical Study on the Penetration of Aluminium Foam by Ogival-Nosed Projectiles

机译：弓形弹丸穿透铝泡沫的理论研究
- 作者：Xiaopeng YAN;Nianmei ZHANG;Guitong YANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Aluminium foam;
- Penetration;
- Cavity expansion theory;
- Ogival-nosed;
86.Thermal Mechanical Analysis by Using Rigid Visco Plastic Meshless Galerkin Method Based on Delaunay Grid Integration for Metal for Ming Process

机译：基于Delaunay网格积分的金属硬粘塑料无网格Galerkin法热分析。
- 作者：Xin WU;Ping LU;Jian SHAO;Hangzhou WANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- thermal-mechanical;
- Delaunay;
- meshless Galerkin method;
- rigid visco plastic;
87.Vector form Intrinsic Finite Element Analysis of Vibration Characteristics of Slab Track

机译：平板轨道振动特性的矢量形式本征有限元分析
- 作者：Lei WU;Zefen WEN;Xinbiao XIAO;Wei LI;Xuesong JIN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Slab Track;
- Dynamics;
- Vector Form Intrinsic Finite Element;
- Wheel/rail system;
- Stress;
88.Vibrations and Acoustic Radiation Characteristics of Two Low-noise Damped Wheels

机译：两个低噪声阻尼轮的振动和声辐射特性
- 作者：Jianying FANG;Xinbiao XIAO;Chao WANG;Xuejun YIN;Mingchang SUN;Xuesong JIN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- rolling noise;
- low-noise wheel;
- constrained layer;
- vibration damping;
89.Vibratory Power Flow in the Gear System with Backlash Nonlinearity and Time Varying Stiffness

机译：带有反冲非线性和时变刚度的齿轮系统中的振动动力流
- 作者：Fang XU;Rui HUO;Lin ZHANG;Jing FENG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- nonlinear;
- gear;
- power flow;
- time-varying stiffness;
- bifurcation;
90.A Quality Evaluation Method for Assembling Process of Complex Products Based on Process Capability Index

机译：基于过程能力指标的复杂产品装配过程质量评估方法
- 作者：Weiping MU;Wenbing CHANG;Yihai HE
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Assembling Process;
- Quality Assurance Model;
- Quality Evaluation;
- Process Capability Index;
91.A Study on Fluid Stirrings by SPH Method Considering Heat Conduction

机译：SPH法考虑导热的流体搅拌研究
- 作者：Yusuke KISHINO;Yuzuru SAKAI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Particle method;
- SPH;
- Fluid stirrings;
92.Analysis of Stress Intensity Factors for cracked plate reinforced with partial stiffener

机译：局部加劲肋加固裂纹板的应力强度因子分析
- 作者：Cuixiang JIANG;Dongwang ZHONG;Jiyun MO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- cracked plate;
- complex function method;
- stiffener;
- crack arrest;
- stress intensity factor;
93.Analysis of Tool Path Modification in Globoidal Cam Machining

机译：弧面凸轮加工中刀具路径修改的分析
- 作者：X.F.TANG;W.HE;Y.S.LIU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- globoidal cam;
- machining;
- enveloping method;
- tool path modification;
- CAD/CAM;
- NC program code;
94.Analysis on Strip Buckling in Continues Annealing Processing

机译：连续退火中带材屈曲的分析
- 作者：Yiding XING;Lihong WANG;Zhi WEN;Ruifeng DOU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Annealing process;
- Strip;
- Buckling;
- Critical stress;
95.Deformation Behaviour and Formability of a Tube in Hydroforming with Radial Crushing

机译：径向挤压液压成形中管的变形行为和可成形性
- 作者：Lianfa YANG;Fengjun CHEN;Qin WANG;Xianchang MAO
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Tube;
- Hydroforming;
- Radial crushing;
- Deformation behaviour;
- Formability;
96.Derivation and Simulation of the Mathematical Model for a Kind of Lathe Tool Cutter

机译：一类车刀刀具数学模型的推导与仿真
- 作者：Xuebin LIU;Shuchang MA;Wei ZHAO;Chongning LI
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- numerical control lathe;
- simulation software;
- lathe tool cutter;
- mathematical model;
97.Design and Precision Machining of the Indexing Mechanism with Globoidal Cam

机译：弧面凸轮分度机构的设计与精密加工
- 作者：Daizheng FANG;Guicheng WANG;Zhipeng SONG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- globoidal cam;
- fuzzy design;
- kinematics simulation;
- precision machining;
98.Design of Automotive Body Welding Assembly Line Based on Green Design

机译：基于绿色设计的车身焊接总装线设计
- 作者：Guiying TONG;Li JU
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Green Design;
- Automotive Welding Assembly Line;
- Modular Design;
- Disassembly Design;
- Recovering and Recycling Design;
99.Design of Sprocket Wheel and Mechanical Simulation of 400 m3 New Type Sintering Machine

机译：400 m3新型烧结机的链轮设计与力学模拟
- 作者：Hongtao LI;Minghua BAI;Jianfeng LI;Zhuan YUAN
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
100.Kinematic Analysis for a 5-DOF Parallel Mechanism Based on the Ordered SOCs Method

机译：基于有序SOCs方法的5自由度并联机构运动学分析
- 作者：Zhixin SHI;Yufeng LUO;Meiyan YE;Tingli YANG
- 会议名称：《The Third International Conference on Mechanical Engineering and Mechanics(第三届国际机械工程与力学会议）论文集》 | 2009年
- Parallel manipulator;
- Kinematic analysis;
- The ordered SOCs;