首页>外文会议>第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集

第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集

召开年：2008
召开地：Harbin(CN);Harbin(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.EFFECT OF ZIRCONIUM ON HIGH TEMPERATURE TENSILE PROPERTIES OF PRECIPITATION-HARDENED MG-ND-ZN CASTING ALLOY

机译：锆对析出硬质MG-ND-ZN铸造合金高温拉伸性能的影响
- 作者：JOONG-HWAN JUN;KI-DUG SEONG;MIN-HA LEE
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Cast Mg-Nd-Zn alloy;
- zirconium;
- high temperature tensile properties;
- creep resistance;
2.MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROERTIES OF Ti-(Ni, Fe)-Sn ULTRAFINE EUTECTIC ALLOYS

机译：Ti-（Ni，Fe）-Sn超细共晶合金的组织演变及力学性能
- 作者：DONG HYOUK PI;KI BUEM KIM;JIN MAN PARK;JUN HEE HAN;DO HYANG KIM
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Composites;
- ternary alloy systems;
- alloy design;
- casting;
- microstructure;
3.INFLUENCE OF ELECTROLYTIC PLASMA OXIDATION COATING ON TENSILE BEHAVIOR OF DIE-CAST AM50 ALLOY SUBJECTED TO SALT CORROSION

机译：电解等离子体氧化膜对盐渍腐蚀压铸AM50合金拉伸性能的影响
- 作者：LIHONG HAN;XUEYUAN NIE;PENG ZHANG;QIANG ZHANG;HENRY HU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Electrolytic plasma oxidation;
- coating;
- diecast;
- AM50;
- salt corrosion;
4.STUDY ON FABRICATION OF SHAPED AL ALLOY FOAM BY TWO-STEP FOAMING METHOD

机译：两步发泡法制备异型合金泡沫的研究
- 作者：XUMING CHU;HUI WANCi SIYUAN HE;DEPING HE
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Al alloy foam;
- two-step foaming;
- shaped Al alloy foam;
- porosity;
5.THE COMPOSITION AND TEMPERATURE EFFECTS ON THE ULTRA HIGH STRENGTH STAINLESS STEEL DESIGN

机译：超高强度不锈钢设计的成分和温度影响
- 作者：W.XU;P.E.J.RIVERA DIAZ DEL CASTILLO;S.VAN DER ZWAAG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Alloy design;
- precipitate;
- composition effect;
- temperature effect;
- genetic algorithm;
6.EFFECT OF Al ON MICROSTRUCTURE AND PROPERTIES OF In718 ALLOY

机译：Al对In718合金组织和性能的影响
- 作者：LIU FANG;YANG SHULIN;SUN WENRU;GUO SHOUREN;HU ZHUANGQI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- In718 alloy;
- aluminum;
- microstructure;
- properties;
7.PREDICTION OF MECHANICAL PROPERTIES OF 25CrMo48V SEAMLESS TUBE USING NEURAL NETWORK MODEL

机译：基于神经网络模型的25CrMo48V无缝钢管力学性能预测
- 作者：LAIBO SUN;CHUANYOU ZHANG;QINGFENG WANG;MINGZHI WANG;ZESHENG YAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Artificial neural network;
- seamless tubing and casing;
- mechanical properties;
- sensitivity;
8.EVOLUTION OF RECRYSTALLIZATION MICROSTRUCTURE AND TEXTURE IN LOW CARBON CSP STEEL DURING ANNEALING

机译：低碳CSP钢退火过程中再结晶组织和组织的演变
- 作者：HAIYAN WANG;RONGBIN TIAN;HUIPING REN;ZILI JIN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Recrystallization;
- transformation;
- low carbon steel;
- CSP;
9.CONTROLLING THE BIODEGRADATION RATE OF MAGNESIUM USING SOL-GEL AND APATITE COATINGS

机译：使用溶胶-凝胶和磷灰石涂层控制镁的生物降解速率
- 作者：YAJING ZHANG;MEI WEI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Magnesium;
- sol-gel;
- hydroxyapatite;
- coating;
- corrosion;
- simulated body fluid;
10.THE INFLUENCE OF SPUTTERING BIAS-VOLTAGE ON LaB6 FILM'S CHARACTERISTICS

机译：溅射偏压对LaB6膜特性的影响
- 作者：JING XU;GUANGHUI MIN;XIAOHUA ZHAO;LUIE HU;HUASHUN YU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- LaB6 film;
- DC Magnetron Sputtering;
- Microstructure;
- Crystallite;
- Deposition rate;
11.EFFECT OF ANNEALING ON CRYSTALLINE STATE AND MAGNETIC PROPERTIES OF (Tb0.28Dy0.72)Fe1.90 THIN FILMS

机译：退火对（Tb0.28Dy0.72）Fe1.90薄膜的晶态和磁性的影响
- 作者：KUOSHE LI;HONGWEI LI;HUI YAN;DUNBO YU;FENGYING WANG;GUOCHENG ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Magnetostriction;
- annealing;
- thin films;
- (Tb0.28Dy0.72)Fe1.90;
12.SURFACE PLASTIC DEFORMATION REGULARITY AND MICROSTRUCTURAL EVOLUTION IN THE COMPOUND ROLLING OF Q235 BILLET

机译：Q235钢坯复合轧制中的表面塑性变形规律和微观结构演变
- 作者：TAO LIN REN;DE BIN SHAN;YAN LU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Compound rolling;
- dual microstructures;
- Q235;
13.EFFECT OF Ce ON GRAPHITE NODULE COUNT AND SIZE DISTRIBUTION IN DUCTILE IRON

机译：Ce对球墨铸铁中石墨球粒数和尺寸分布的影响
- 作者：XIAOGANG DIAO;ZHILIANG NING;FUYANG CAO;JIANFEI SUN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Ductile iron;
- cerium;
- spheroidal graphite;
- nodule count;
- size distribution;
14.DYNAMIC MEMBRANE TECHNOLOGY FOR PRINTING WASTEWATER REUSE

机译：用于废水回用的动态膜技术
- 作者：LIN LIU;XUJIE LU;JIHUA CHEN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Printing wastewater;
- dynamic membrane;
- color removal;
- reuse;
15.CONTROLLING AND OPTIMIZATION OF THERMAL PROFILE IN REFLOW SOLDERING

机译：回流焊中热曲线的控制和优化
- 作者：JIANWEI SHI;PENG HE;XIAOCHUN LV
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Heating factor;
- reliability of solder joint;
- thermal profile;
- intermetallic compound;
16.EFFECT OF CHARGE DENSITY ON THE TAYLOR CONE IN ELECTROSPINNING

机译：电纺丝中电荷密度对泰勒锥的影响
- 作者：JONATHAN STANGER;NICK TUCKER;KERRY KIRWAN;MARK P.STAIGER
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Electrospinning;
- poly(vinyl alcohol);
- charge density;
- Taylor cone;
17.PARAMETER EFFECTS ON TEMPERATURES IN THE THIN FILM IRRADIATED BY ULTRAFAST-PULSE LASER

机译：超快脉冲激光辐照的薄膜温度对温度的影响
- 作者：CHING-YEN HO;MAO-YU WEN;CHIA-SHENG SHIH
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Temperature;
- ultrafast-pulse;
- laser;
18.DEVELOPMENT OF HOT DRAWING PROCESS FOR NITINOL TUBE

机译：镍钛合金管热拉伸工艺的发展
- 作者：WEI CHEN;H.WANG;LEI ZHANG;XIUSHAN TANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Nitinol tube;
- hot drawing;
- shape memory;
- superelasticity;
19.EFFECT OF HYDRAULIC PRESSURE ON WARM HYDRO MECHANICAL DEEP DRAWING OF MAGNESIUM ALLOY SHEET

机译：液压对镁合金板温水力学深冲的影响
- 作者：LIU WEI;WU LINZHI;YUAN SIMIAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Magnesium alloy;
- warm hydro mechanical deep drawing;
- numerical simulation;
20.LIQUID PHASE MIGRATION IN EXTRUSION OF AQUEOUS ALUMINA PASTE FOR FREEZE-FORM EXTRUSION FABRICATION

机译：氧化铝糊料挤出中的液相迁移，用于冻结形式的挤出制备
- 作者：HONGJUN LIU;MING C.LEU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Solid freeform fabrication;
- liquid phase migration;
- extrusion;
- alumina paste;
21.STICKY AND SLIPPY: TWO HYDROPHOBIC STATES TRANSITION OF ZnO HIERARCHICAL FILMS BY FLUOROALKYLSILANE MODIFICATION

机译：粘性和滑移：氟代烷基硅烷改性对ZnO多层膜的两个疏水状态的转变
- 作者：CHANGSONG LIU;QIANG ZHANG;TAO LI;ZHIWEN LI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- ZnO;
- superhydrophobic surface;
- lotus effect;
- self-assembly layers;
- Cassie's state;
22.MICROSTRUCTURE AND OPTICAL PROPERTIES OF ERBIUM DOPED SILICA-BASED FILMS VIA FLAME HYDROLYSIS DEPOSITION AND AEROSOL DOPING

机译：火焰水解和气溶胶掺杂掺二氧化硅基薄膜的微观结构和光学性质。
- 作者：JIEHE SUI;HAIBO WANG;WEI CAI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Erbium;
- flame hydrolysis deposition;
- photoluminescence;
- cooperative upconversion;
23.DIELECTRIC PROPERTIES OF POROUS Si3N4-SiO2-BN COMPOSITES

机译：多孔Si3N4-SiO2-BN复合材料的介电性能
- 作者：YINBAO SUN;YUMIN ZHANG;DIHONG LI;JIECAI HAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Dielectric constant;
- silicon nitride;
- composites;
24.EFFECT OF BORON ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HOT-ROLLED Nb-ADDED HSLA H-SECTION STEEL

机译：硼对热轧添加Nb的HSLA H型钢的组织和力学性能的影响
- 作者：ZUOCHENG WANG;GUOTAO CUI;TAO SUN;WEIMIN GUO;XIULING ZHAO;JUNQING GAO;CHANGXING DONG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Boron;
- H-section steel;
- microstructure;
- mechanical properties;
25.FABRICATION OF MACH-ZEHNDER INTERFEROMETOR BASED ON PLANAR WAVEGUIDE FOR THE APPLICATION OF BIOSENSORS

机译：基于平面波导的MACH-ZEHNDER干扰物的制备及其在生物传感器中的应用
- 作者：JUN-HYONG KIM;HOE-YOUNG YANG;HYUN-YONG LEE
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Planar lightwave circuit;
- power splitter;
- Mach-Zehnder interferometer;
- optical biosensor;
26.INFLUENCE OF THE GROWTH TEMPERATURE ON THE PROPERTIES OF Mn-DOPED SnO2 THIN FILMS GROWN BY PULSED LASER DEPOSITION

机译：脉冲激光沉积生长温度对掺Mn的SnO2薄膜的性能的影响
- 作者：YANXUE CHEN;JUN JIAO
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Mn-doped SnO2;
- thin film;
- pulsed laser deposition;
- magnetic semiconductor;
27.COMPOSITION AND NANOHARDNESS OF SiC FILMS DEPOSITED BY ELECTRON BEAM PHYSICAL VAPOR DEPOSITION

机译：电子束物理气相沉积沉积SiC薄膜的组成和纳米级
- 作者：MIN TENG;XIAODONG HE;YUE SUN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- SiC film;
- EB-PVD;
- composition;
- nanohardness;
28.EFFECT OF AL CONTENT ON MICROSTRUCTURE AND PROPERTIES OF AN INTERMETALLIC Ni-Ti (Al) COMPOUND/Ni GRADED COATING DEPOSITED ON COPPER SUBSTRATE

机译：Al含量对沉积在铜基体上的金属间Ni-Ti（Al）化合物/ Ni梯度涂层的组织和性能的影响
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Copper;
- coating;
- TiO2 powder;
- intermetallic Ni-Ti compound;
- Ni-Al;
29.EFFECT OF VELOCITY OF BALLS ON THE STRAIN AND STRESS OF LOW CARBON STEEL SURFACE LAYER DURING SMAT

机译：球运动速度对低碳钢表面层拉伸过程中应变和应力的影响
- 作者：HUAYUN DU;YINGHUI WEI;HENGJIN ZHANG;WANMING LIN;LIFENG HOU;ZENGQING LIU;GANG LIU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Low carbon steel;
- SMAT;
- plastic deformation;
- strain and stress;
- strain rate;
30.TRANSFORMATION BEHAVIOR AND SHAPE MEMORY EFFECT OF A CoAl ALLOY

机译：煤炭合金的转变行为和形状记忆效应
- 作者：FENG CHEN;BING TIAN;YUXIANG TONG;YUFENG ZHENG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Shape memory alloy;
- CoAl alloy;
- martensitic transformation;
- shape memory effect;
31.WRINKLING BEHAVIOR IN HYDROFORMING OF UNSYMMETRICAL TUBULAR PART

机译：非对称管状零件液压成型中的起皱行为
- 作者：XIAOSONG WANG;YINGXUE YAO;SHUIAN YUAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Hydroforming;
- internal high pressure forming;
- wrinkle;
- unsymmetrical tubular part;
32.THE NEW HEAT TREATMENT TECHNOLOGY OF A356 ALUMINIUM ALLOY PREPARED BY PTC

机译：PTC制备A356铝合金的新型热处理工艺。
- 作者：LIANYONG ZHANG;YANHUA JIANG;ZHUANG MA;WENKUI WANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Phase Transition Cooling;
- A356 alloy;
- heat treatment;
- mechanical properties;
33.TEXTURE EVOLUTION OF BT20 ALLOY IN BACKWARD TUBE SPINNING

机译：反向管纺丝中BT20合金的织构演变
- 作者：GUOPING YANG;WENCHEN XU;DEBIN SHAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Texture;
- BT20 alloy;
- backward spinning;
- deformation history;
- finite element analysis;
34.ANALYSIS ON THE MICROSTRUCTURE OF THE AS-CAST AND EXTRUDED Mg-(6-10)Li-3Al-Ce-Ca ALLOYS

机译：铸态和渗出的Mg-（6-10）Li-3Al-Ce-Ca合金的显微组织分析
- 作者：LIREN CHENG;ZHANYI CAO;RUIZHI WU;MILIN ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Mg-Li alloys;
- microstructure;
- extrusion;
- microhardness;
35.ACHIEVING ULTRAFINE GRAIN SIZE IN Mg-Al-Zn ALLOY BY COLD DRAWING

机译：冷拔获得Mg-Al-Zn合金的超细晶粒尺寸
- 作者：HONGYING CHAO;YANG YU;ERDE WANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Magnesium alloy;
- grain refining;
- cold drawing;
- recrystallization annealing;
36.EFFECTS OF THERMO-MECHANICAL TREATMENTS ON MICROSTRUCTURE OF Ti-43Al-9V-Y ALLOY

机译：热机械处理对Ti-43Al-9V-Y合金组织的影响
- 作者：FANTAO KONG;YUYONG CHEN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- TiAl alloy;
- forging;
- heat treatment;
- microstructure;
37.A STUDY OF DYNAMIC RECRYSTALLIZATION IN TA15 TITANIUM ALLOY DURING HOT DEFORMATION BY CELLULAR AUTOMATA MODEL

机译：用细胞自动机模型研究TA15钛合金热变形过程中的动态再结晶。
- 作者：DONG HE;JING CHUAN ZHU;YANG WANG;YONG LIU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Dynamic recrystallization;
- TA15 titanium alloy;
- hot deformation;
- cellular automata;
38.THE EFFECT OF POROSITY ON HEAT TRANSFER AND MASS TRANSFER OF Mg-3Ni-2MnO2 HYDROGEN STORAGE MATERIALS REACTION BED

机译：孔隙率对Mg-3Ni-2MnO2贮氢材料反应床传热和传质的影响
- 作者：ZHANG WENCONG;WANG GANG;MA JUNFEI;WANG ZHAOYOU;WANG ERDE
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Heat transfer;
- mass transfer;
- hydride;
- reaction bed;
39.DEVELOPMENT OF HIGH STRENGTH Mg-Cu-Zn ULTRAFINE EUTECTIC COMPOSITES WITH ENHANCED PLASTICITY

机译：增强塑性的高强度Mg-Cu-Zn超细共晶复合材料的研制
- 作者：KI AN SONG;KI BUEM KIM;JIN MAN PARK;JAE SEOL LEE;JOON SIK PARK;WON HEE LEE;DO HYANG KIM
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Composites;
- ternary alloy systems;
- alloy design;
- casting;
- microstructure;
40.EFFECT OF SCANDIUM ON THE CORROSION BEHAVIOR OF THE CASTING Al-Cu ALLOYS IN NACL SOLUTION

机译：砷对铸造铝铜合金在NaCL溶液中腐蚀行为的影响
- 作者：WENGUI ZHAO;JINGUO WANG;JINGQI HOU;QICHUAN JIANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Al-Cu alloys;
- scandium;
- electrochemical measurements;
- pitting corrosion;
41.MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ31 MAGNESIUM ALLOY SHEET BY HOT ROLLING

机译：热轧AZ31镁合金薄板的组织和力学性能
- 作者：QING MIAO;LIANXI HU;ERDE WANG;SHUJIN LIANG;HONGYING CHAO
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Magnesium alloy sheet;
- hot rolling;
- microstructure;
- mechanical properties;
42.EFFECT OF HOT EXTRUSION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ELECTROMAGNETIC CONTINUOUS CAST AZ31 MAGNESIUM ALLOY

机译：热挤压对电磁连续铸造AZ31镁合金的组织和力学性能的影响
- 作者：GUOQING CHEN;JUNHUI SONG;XUESONG FU;YUXIAN ZHAO;WENLONG ZHOU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- AZ31 magnesium alloy;
- EMC;
- hot extrusion;
- mechanical property;
43.INFLUENCE OF T5 TREATMENT ON MICROSTRUCTURE AND PROPERTIES OF EXTRUDED ZK60 MAGNESIUM ALLOY

机译：T5处理对ZK60镁合金渗出组织和性能的影响
- 作者：ZHIMIN ZHANG;BAOHONG ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- As-cast ZK60 magnesium alloy;
- extrusion;
- T5 treatment;
- mechanical properties;
- microstructure;
44.PROCESSING-PROPERTY RELATIONSHIPS OF AS-CAST MAGNESIUM FOAMS WITH CONTROLLABLE ARCHITECTURE

机译：结构可控的铸镁泡沫的加工性能关系
- 作者：NICHOLAS T.KIRKLAND;INGOLFUR KOLBEINSSON;TIM WOODFIELD;GEORGE DIAS;MARK P.STAIGER
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Magnesium;
- periodic metal foam;
- casting;
- infiltration process;
45.NANOSTRUCTURED ALUMINA CERAMIC MEMBRANES FOR GAS SEPARATION

机译：用于气体分离的纳米结构氧化铝陶瓷膜
- 作者：IAN BROWN;MARK BOWDEN;TIM KEMMITT;JEREMY WU;JULES CARVALHO
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Nanostructure;
- alumina;
- ceramic;
- membrane;
- hydrogen;
46.EFFECTS OF V2O5 ADDITION ON MICROWAVE DIELECTRIC PROPERTIES OF 16CaO-9Li2O-12Sm2O3-63TiO2 CERAMICS

机译：添加V2O5对16CaO-9Li2O-12Sm2O3-63TiO2陶瓷微波介电性能的影响。
- 作者：YONGJUN GU;JINLIANG HUANG;DAOMING SUN;QIAN LI;XIAO WANG;HUI XU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Dielectric properties;
- CLST ceramics;
- perovskite;
- V2O5 addition;
47.BLUE LIGHT EMISSION FROM STRESS-ACTIVATED SR2MGSI2O7:EU

机译：应力激活SR2MGSI2O7：EU的蓝光发射
- 作者：HONGWU ZHANG;NAO TERASAKI;HIROSHI YAMADA;CHAO-NAN XU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Mechanoluminescence;
- sensor;
- thermoluminescence;
- solid state synthesis;
48.EFFECT OF STARCH BINDERS IN ALUMINA COATINGS ON AISI 316 L STAINLESS STEEL FOR MEDICAL APPLICATION

机译：铝涂层中淀粉粘合剂对AISI 316 L不锈钢医用的影响。
- 作者：M.J.GHAZALI;A.A.PAUZI;C.H.AZHARI;J.A.GHANI;A.B.SULONG;R.MUSTAFA
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Starch binder;
- coating;
- AISI 316 L;
49.STRAIN RATE DEPENDENCE ON THE HIGH TEMPERATURE MECHANICAL BEHAVIOR OF THE NI-18SI-3.0NB-1.0CR-0.2B INTERMETALLIC ALLOY

机译：NI-18SI-3.0NB-1.0CR-0.2B合金的高温力学行为与应变速率的关系
- 作者：CHIH-CHIANG FU;JASON SHIAN-CHING JANG;I-SUI LEE;HUEI-SEN WANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
50.FORMATION MECHANISM OF POROUS STRUCTURE ON 316L STAINLESS STEEL BY ANODIZATION

机译：阳极氧化对316L不锈钢多孔结构的形成机理
- 作者：YUJIANG WANG;XINXIN MA;GUANGZE TANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Anodization;
- porous;
- 316L stainless steel;
- sputtered aluminum;
51.EFFECT OF COBALT AND NICKEL ON THE STRUCTURAL STABILITY FOR FE3C: FIRST-PRINCIPLES CALCULATIONS

机译：钴和镍对FE3C的结构稳定性的影响：第一性原理计算
- 作者：XIANGRONG WANG;MUFU YAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Structural stability;
- Fe3C;
- first-principles;
- formation energy;
52.EVOLUTION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE Ni-25Al-27.5Fe-1.0Nb INTERMETALLIC ALLOY AFTER THERMAL MECHANICAL TREATMENT

机译：机械热处理后Ni-25Al-27.5Fe-1.0Nb中间合金的组织演变和力学性能
- 作者：CHIH-CHIANG FU;JASON SHIAN-CHING JANG;HAN-CHANG TSAI;TSUNG-HSIUNG LI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Intermetallic alloy;
- nickel aluminide;
- thermal mechanical treatment;
- mechanical properties;
53.CHARACTERIZATION AND PHOTOCATALYTIC ACTIVITY OF Zn2SnO4 NANOSTRUCTURES SYNTHESIZED VIA HYDROTHERMAL METHOD

机译：水热法合成Zn2SnO4纳米结构的表征和光催化活性
- 作者：YU-SHIANG WU;YUAN-HAUN LEE;CHUN-LIANG FENG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Zinc stannate (ZTO);
- hydrothermal method;
- mineralizer;
- nanoparticle;
- photocatalyst;
54.INTEGRALLY DIRECTIONALLY SOLIDIFIED MICROSTRUCTURE OF AN NIOBIUM SILICIDE BASED ULTRAHIGH TEMPERATURE ALLOY

机译：硅化铌超高温合金的整体定向凝固组织
- 作者：XIPING GUO;HAISHENG GUO;CHENGFANG YAO;PING GUAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Nb silicide based alloy;
- integrally directional solidification;
- eutectic;
- S/L interface;
55.PREDICTING Ms TEMPERATURE APPLYING PRINCIPAL COMPONENT ANALYSIS-ARTIFICIAL NEURAL NETWORKS

机译：应用主成分分析-人工神经网络预测温度
- 作者：XUEXIA XU;BINGZHE BAI;WEI YOU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Martensite start temperature;
- principal component analysis;
- artificial neural network;
56.REFINED DENDRITE AND PRECISE ORIENTATION OF NICKEL-BASED MONOCRYSTAL SUPERALLOY WITH MELT SUPERHEATING TREATMENT

机译：镍基单晶高温合金熔体过热处理的细化枝晶和精确定向
- 作者：MINMING ZOU;JUN ZHANG;BO LI;LIN LIU;HENGZHI FU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Monocrystal superalloy;
- dendrite;
- orientation;
- segregation;
- melt superheating treatment;
57.DISTRIBUTION AND CORROSION BEHAVIORS OF THE TRIPLE JUNCTIONS IN A GRAIN BOUNDARY ENGINEERED 304 STAINLESS STEEL

机译：晶界工程化304不锈钢中三重连接的分布和腐蚀行为
- 作者：XIAOYING FANG;WEIGUO WANG;HONG GUO;CONGXIANG QIN;BANGXIN ZHOU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
58.FRICTION STIR PROCESSING OF SKD61 TOOL STEEL

机译：SKD61工具钢的摩擦搅拌工艺
- 作者：YINGCHUN CHEN;KAZUHIRO NAKATA
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Friction stir processing;
- tool steel;
- microstructure;
- mechanical properties;
59.INFLUENCE OF NITROGEN ON HOT DUCTILITY BEHAVIOR OF MEDIUM CARBON MICROALLOYED STEEL

机译：氮对中碳微合金钢热延性的影响
- 作者：SUJUAN ZHAO;QINGFENG WANG;ZESHENG YAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Nitrogen enhanced steels;
- hot ductility;
- precipitation;
- dynamic recrystallization;
- deformation induced ferrite;
60.THE Z-PHASE IN 9Cr FERRITIC/MARTENSITIC HEAT RESISTANT STEEL

机译：9Cr铁素体/马氏体耐热钢中的Z相
- 作者：FENGSHI YIN;FUXIA CHEN;XUEBO JIANG;BING XUE;LI ZHOU;WOOSANG JUNG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- 9Cr steel;
- nano-sized MX;
- Z-phase;
- creep;
61.EFFECTS OF ADDITIONAL ELEMENTS ON THE EVOLUTION OF SECOND PHASES IN 9-12 Cr STEEL AND RESULTING MECHANICAL PROPERTIES

机译：附加元素对9-12％Cr钢中第二相的演变及其力学性能的影响
- 作者：JILING DONG;HUI YU;DAE-HWANG YOO;QUOCBAO HUYNH;KEESAM SHIN;MINSOO KIM;SUNGTAE KANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- 9-12 Cr;
- aging;
- microstructural evolution;
- precipitates;
- mechanical properties;
62.Al2O3ZrO2 (Y2O3) PREPARED BY COMBUSTION SYNTHESIS UNDER HIGH GRAVITY

机译：高重力下燃烧合成制备的Al2O3ZrO2（Y2O3）
- 作者：LONG ZHANG;ZHONGMIN ZHAO;YIGANG SONG;WEIGUO WANG;HONGBO LIU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Al2O3/ZrO2 (4Y);
- combustion synthesis;
- high gravity;
- self-growing;
- rapid solidification;
63.EPITAXIAL GROWTH OF NON-POLAR A-PLANE ZNO ON R-PLANE SAPPHIRE SUBSTRATES BY MOCVD AND RF-SPUTTERING

机译：通过MOCVD和RF溅射研究非极性A平面Zno在R平面蓝宝石衬底上的表观生长
- 作者：HOU-GUANG CHEN;GUO-JU CHEN;SHENG-RUI JIAN;GOU-ZHI HUANG;JHIH-WEI NI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- ZnO;
- epitaxial growth;
- XRD;
- AFM;
- TEM;
64.THERMAL SHOCK BEHAVIOR OF ZrB2-20vol. SiC-15vol. GRAPHITE FLAKE BY HOT PRESSING

机译：热压ZrB2-20vol％SiC-15vol％石墨片的热震性能
- 作者：XINGHONG ZHANG;ZHI WANG;XIN SUN;WENBO HAN;CHANGQING HONG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- UHTC;
- thermal shock resistance;
- residual strength;
- microstructure;
65.HIGH TEMPERATURE OXIDATION OF CaB6-28wtNi SINTERED BODY

机译：CaB6-28wt％Ni烧结体的高温氧化
- 作者：LIN ZHANG;GUANGHUI MIN;LIXIA YANG;HUASHUN YU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- CaB6;
- sintered body;
- Ni;
- oxidation;
66.EFFECT OF BN/Ti RATIO ON THE REACTION SYNTHESIS OF TiB2-TiNx CERAMICS

机译：BN / Ti比对TiB2-TiNx陶瓷反应合成的影响
- 作者：LEI ZHAN;PING SHEN;QICHUAN JIANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Titanium diboride;
- titanium nitride;
- SHS;
67.DIELECTRIC PROPERTIES OF Ca(1-x)ZnxLa4TisO17 CERAMICS AT MICROWAVE FREQUENCIES

机译：Ca（1-x）ZnxLa4TisO17陶瓷在微波频率下的介电性能
- 作者：Yih-Chien Chen;Jian-Min Tsai
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
68.MICROSTRUCTURE IN WORN SURFACE OF HADFIELD STEEL CROSSING

机译：硬质合金交叉口磨损表面的显微组织
- 作者：F.C.ZHANG;B.LV;T.S.WANG;C.L.ZHENG;M.LI;M.ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Crossing;
- high manganese steel;
- nanocrystallization;
69.APPLICATION OF ANN BACK-PROPAGATION FOR FRACTURE TOUGHNESS IN MICROALLOY STEEL

机译：人工神经网络反向传播在微合金钢断裂韧性中的应用
- 作者：HONGYAN DUAN;YOUTANG LI;GUIPING HE;JIN ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Microalloy steel;
- fracture toughness;
- back-propagation model;
- intercritical annealing;
70.EFFECT OF DEFORMATION-INDUCED TRANSFORMATION PROCESS ON FERRITE GRAIN SIZE AND VOLUME FRACTION IN STEEL 12CR1MOV

机译：变形诱发的转变过程对12CR1MOV钢中铁素体晶粒尺寸和体积分数的影响
- 作者：QINGFEN LI;XIUFANG CUI;HONGBIN CHEN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Deformation induced transformation (DIT);
- grain size;
- volume fraction;
- grain refinement;
71.ANALYSIS OF 100-METER RAIL TEMPERATURE FIELD DURING COOLING PROCESS BEFORE STRAIGHTENING BY FEM

机译：有限元矫直过程中冷却过程中100米钢轨温度场的有限元分析
- 作者：GE LI;HAIY AN CUI;LIN CHEN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- 00-meter rail;
- bending before straightening;
- transient temperature field;
- finite element;
72.THE CHANGE IN THE CHEMICAL COMPOSITION AND TOUGHNESS OF API 5L-X70 WELDS BY ADDITION OF TITANIUM

机译：钛添加对API 5L-X70焊缝化学成分和韧性的变化。
- 作者：BEHROOZ BEIDOKHTI;AMIR HOSEIN KOUKABI;ABOLGHASEM DOLATI;PENG HE
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Titanium;
- bainite;
- quasi-cleavage;
- manganese;
73.CHARACTERIZATION OF SHEAR BANDS IN TWO BULK METALLIC GLASSES WITH DIFFERENT INHERENT PLASTICITY

机译：两种具有不同固有塑性的大块金属玻璃中的剪切带特性
- 作者：JIANSHENG GU;LEI LI;TAIHUA ZHANG;PENG JIANG;BINGCHEN WEI;ZHIWEI SUN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Bulk metallic glass;
- plastic deformation;
- shear band;
- depth sensitive indentation;
74.TEM INVESTIGATION ON CRYSTALLIZATION BEHAVIOR OF A Fe68C10.5Si4.4B6.5P8.6Al2 BULK METALLIC GLASS

机译：Fe68C10.5Si4.4B6.5P8.6Al2块状金属玻璃的结晶行为的TEM研究
- 作者：KI BUEM KIM;HONG XIANG LI;SEONGHOON YI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Bulk metallic glass;
- crystallization behavior;
- heterogeneous nucleation;
75.CHARACTERIZATION AND APPLICATION OF CONDUCTING POLYMER COATED TEXTILES

机译：导电聚合物涂层纺织的表征与应用
- 作者：LUING WANG;TONG LIN;XUNGAI WANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Conductive polymer;
- electronic textiles;
- polypyrrole;
- coating;
76.SIMULATING THE EFFECT OF POISSON RATIO ON METALLIC GLASS PROPERTIES

机译：模拟泊松比对金属玻璃性能的影响
- 作者：JAMES R.MORRIS;RACHEL S.AGA;TAKESHI EGAMI;VALENTIN A.LEVASHOV
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Metallic glass;
- Poisson ratio;
- molecular dynamics;
77.EFFECT OF COEXISTENCE OF SIMILAR ELEMENTS La AND Ce ON FORMATION OF (La-Ce)-Al-Cu BULK METALLIC GLASSES

机译：相似元素La和Ce共存对（La-Ce）-Al-Cu大块金属玻璃形成的影响
- 作者：QING YANG;SHUJIE PANG;RAN LI;TAO ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Rare earth metal;
- bulk metallic glass;
- glass forming ability;
- supercooled liquid region;
78.A GLASS TRANSITION MODEL FOR SHAPE MEMORY POLYMER AND ITS COMPOSITE

机译：形状记忆聚合物及其复合材料的玻璃化转变模型
- 作者：BO ZHOU;YAN-JU LIU;XIN LAN;JIN-SONG LENG;SUNG-HO YOON
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Shape memory polymer;
- shape memory polymer composite;
- glass transition model;
79.TENSILE AND COMPRESSIVE MECHANICAL BEHAVIOR OF A CoCrCuFeNiAl0.5 HIGH ENTROPY ALLOY

机译：CoCrCuFeNiAl0.5高熵合金的拉伸和压缩力学行为
- 作者：FANGJUN WANG;YONG ZHANG;GUOLIANG CHEN;HYWEL A.DAVIES
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- High entropy alloy;
- solid solution;
80.EFFECT OF CRYSTALLIZATION AND SURFACE TREATMENT ON DEFORMATION AND FRACTURE OF Zr-Ti-Cu-Ni-Be BULK METALLIC GLASS

机译：结晶和表面处理对Zr-Ti-Cu-Ni-Be块状金属玻璃的形变和断裂的影响
- 作者：YOUNG CHUL CHOI;SUN IG HONG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Bulk metallic glass;
- crack;
- surface modification;
- electro-plating;
- crystallization;
81.MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TI-BASED METALLIC GLASS MATRIX COMPOSITES

机译：TI基金属玻璃基复合材料的微观结构和力学性能
- 作者：JIANLI WANG;WEN HU;LIDONG WANG;YAOMING WU;LIMIN WANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Ti-Cu-Zr-Ni-Sc alloy;
- metallic glass;
- microstructure;
- mechanical properties;
82.EFFECT OF ANNEALING ON THE GIANT MAGNETO-IMPEDANCE OF CO-BASED WIRES

机译：退火对钴基焊丝巨磁阻抗的影响
- 作者：SHULING ZHANG;DAWEI XING;JIANFEI SUN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- GMI effect;
- soft magnetic properties;
- anneal treatment;
- amorphous wire;
83.EFFECT OF HIGH MAGNETIC FIELD ON THE CRYSTALLIZATION OF MELT-SPUN FE-PT-B AMORPHOUS ALLOY

机译：强磁场对熔喷Fe-PT-B非晶态合金结晶的影响
- 作者：TAO ZHANG;XINGGUO ZHANG;NANNAN WU;ZHENG REN;FEI JIA;WEI ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Amorphous alloy;
- high magnetic field;
- refinement;
- crystallization;
84.SPRAY FORMING OF FINEMET ALLOY FE73.5CU1NB3SI13.5B9

机译：FINEMET合金FE73.5CU1NB3SI13.5B9的喷涂成形
- 作者：SHA YANG;BIAO YAN;PENG DONG;LEDING GUAN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Finemet alloy;
- spray forming;
- soft magnetic properties;
- nanocrystallization;
- amorphous;
85.PRELIMINARY STUDY OF FABRICATING BULK FE-BASED AMORPHOUS ALLOY BY COLD GAS DYNAMIC SPRAYING

机译：冷气动态喷涂制备大块铁基非晶态合金的初步研究
- 作者：LEDING GUAN;BIAO YAN;LING LONG;SHA YANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Cold gas dynamic spraying;
- Fe-based;
- amorphous;
86.PREPARATION AND CHARACTERIZATION OF AMORPHOUS ALLOY/POROUS SiC Bi-CONTINUOUS STRUCTURE COMPOSITE

机译：非晶态合金/多孔SiC双连续结构复合材料的制备与表征
- 作者：YONGLI CHEN;AIMIN WANG;HAIFENG ZHANG;ZHUANGQI HU
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Metallic glasses;
- infiltration;
- porous SiC;
- composites;
87.FABRICATION OF TWO-DIMENSIONAL PHOTONIC CRYSTALS WITH GE2SB2TE5 NANOHOLE ARRAYS BY NANOSPHERE LITHOGRAPHY

机译：纳米球面照相术制备含GE2SB2TE5纳米孔二维光子晶体
- 作者：KI-HO SONG;HYUN-YONG LEE;HOE-YOUNG YANG;SUNG-WON KIM;JAE-HEE SEO;SANG-DON YUN;JUN-HYUNG KIM
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- GeSbTe;
- phase change;
- nanosphere lithography;
- photonic crystal;
- photonic band gap;
88.BONDING OF ALUMINA AND METAL USING BULK METALLIC GLASS FORMING ALLOY

机译：散装金属玻璃成形合金对铝和金属的粘接
- 作者：JINJUN ZHANG;JIANSHENG GU;LEI LI;YONG HUAN;BINGCHEN WEI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Bulk metallic glass forming alloy;
- brazing;
- ceramicmetal bonding;
89.NOVEL POLYMER ELECTROLYTE BASED ON POLY(VINYLIDENE FLUORIDE) AND POLY(4-VINYL PYRIDINE) HAVING A NANO-CHANNEL FOR ION TRANSPORTATION

机译：基于聚偏二氟乙烯和聚（4-乙烯基吡啶）的纳米通道的离子传输新型高分子电解质
- 作者：SEUNG HYUN OH;SEONG LAK RANG;KWANG-UN JEONG;CHANGWOON NAH;BAIK-HWAN CHO
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- PEM;
- PVdF;
- P4VP;
- ionic conductivity;
- nanofiber;
- mat;
- ion;
90.IMPROVEMENT OF PLASTICITY OF TI-BASED BULK METALLIC GLASSES BY PHASE TRANSITION OF A COOLING MEDIUM

机译：通过冷却介质的相变改善TI基块状金属玻璃的可塑性
- 作者：SHENGFENG SHAN;ZAUI ZHAN;YUANZHI JIA;CHANGZENG FAN;BAOQING ZHANG;RIPING LIU;WENKUI WANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Phase transition cooling;
- Ti-based bulk metallic glass;
- plasticity;
- fracture strength;
91.SAMPLE-SIZE EFFECTS ON THE COMPRESSION BEHAVIOR OF A Ni-BASED AMORPHOUS ALLOY

机译：镍基非晶合金压缩行为的样本量效应
- 作者：WEIZHONG LIANG;GUOGANG ZHAO;LINZHI WU;HONGJUN YU;MING LI;LIN ZHANG
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Bulk metallic glasses;
- mechanical properties;
- Ni-based alloy;
- sample size;
92.MECHANICAL PROPERTY OF A NEW Zr-BASED BULK METALLIC GLASS WITH CERTAIN PLASTICITY AT LOW TEMPERATURE

机译：一种新型的基于Zr的具有一定塑性的低温大块金属玻璃的力学性能
- 作者：YAJUAN SUN;DONGDONG QU;JUN SHEN;YONGJIANG HUANG;XIANSHUN WEI
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Zr-based BMG;
- plasticity and strength;
- shear bands;
- serrated flow;
- low temperature;
93.THE YIELD BEHAVIOR AND YIELD CRITERION OF BULK METALLIC GLASS

机译：散装金属玻璃的屈服行为和屈服准则
- 作者：JIBIN HU;DEMIN CHEN
- 会议名称：《第五届先进材料与加工国际会议(Fifth International Conference on Advanced Materials and Processing ICAMP-5)论文集》 | 2009年
- Bulk metallic glass;
- yield behavior;
- yield criterion;
- theory of disconnected slip line field;