首页> 外文期刊>Waste Management >Methodologies for measuring fugitive methane emissions from landfills - A review
【24h】

Methodologies for measuring fugitive methane emissions from landfills - A review

机译:测量垃圾填埋场逃逸甲烷排放的方法 - 评论

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Fugitive methane (CH4) emissions from landfills are significant global sources of greenhouse gases emitted into the atmosphere; thus, reducing them would be a beneficial way of overall greenhouse gas emissions mitigation. In Europe, landfill owners have to report their annual CH4 emissions, so direct measurements are therefore important for (1) evaluating and improving currently applied CH4 emission models, (2) reporting annual CH4 emissions and (3) quantifying CH4 mitigation initiatives. This paper aims at providing an overview of currently available methodologies used to measure fugitive CH4 emissions escaping from landfills. The measurement methodologies are described briefly, and the advantages and limitations of the different techniques are discussed with reference to published literature on the subject. Examples are given of individual published studies using different methodologies and studies comparing three or more methodologies. This review suggests that accurate, whole-site CH4 emission quantifications are best done using methods measuring downwind of the landfill, such as tracer gas dispersion and differential absorption LiDAR (DIAL). Combining aerial CH4 concentration measurements from aircraft or unmanned aerial vehicles with wind field measurements offers a great future potential for improved and cost-efficient integrated landfill CH4 emission quantification. However, these methods are difficult to apply for longer time periods, so in order to measure temporal CH4 emission changes, e.g. due to the effect of changes in atmospheric conditions (pressure, wind and precipitation), a measurement method that is able to measure continuously is required. Such a method could be eddy covariance or static mass balance, although these procedures are challenged by topography and inhomogeneous spatial emission patterns, and as such they can underestimate emissions significantly. Surface flux chambers have been used widely, but they are likely to underestimate emission rates, due to the heterogeneous nature of most landfill covers resulting in sporadic and localised CH4 emission hotspots being the dominant emission routes. Furthermore, emissions from wells, vents, etc. are not captured by surface flux chambers. The significance of any underestimation depends highly on the configuration of individual landfills, their size and emission patterns. (C) 2019 Published by Elsevier Ltd.
机译:垃圾填埋场的逃逸甲烷(CH4)排放是融入大气中的温室气体的重大全球来源;因此,减少它们将是整体温室气体排放减轻的有益方式。在欧洲,垃圾填埋业主必须报告其年度CH4排放,因此直接测量对于(1)评估和改进目前应用的CH4排放模式,(2)报告年度CH4排放和(3)量化CH4缓解举措。本文旨在提供目前可用的方法概述,用于衡量从垃圾填埋场逃逸的逃逸的CH4排放。简要描述测量方法,并参考对象的发布文献讨论了不同技术的优点和局限。给出了使用不同方法和研究比较三种或更多方法的研究的个体公开研究。本综述表明,使用测量垃圾填埋场的下风,例如示踪气体分散和差动吸收延迟雷达(表盘),最准确地完成全场的CH4发射量化。将航空CH4浓度测量与风场测量的无人机或无人驾驶飞行器相结合,提供了改进和成本高效的集成垃圾填埋场排放量化的未来可能性。然而,这些方法难以施加较长的时间段,因此为了测量时间CH4排放变化,例如,由于大气条件(压力,风和沉淀)变化的影响,需要连续测量的测量方法。这种方法可以是涡旋协方差或静态质量平衡,尽管这些程序是通过地形和不均匀的空间排放模式挑战的,因此它们可以显着低估排放。由于大多数垃圾填埋场覆盖物的异质性质,因此,表面磁通室已被广泛使用,但它们可能低估排放率,导致散发性和局部化的CH4排放热点是主要排放路线。此外,没有通过表面磁通室捕获来自孔,通风口等的排放。任何低估的重要性都依赖于各个垃圾填埋场的配置,其尺寸和排放模式。 (c)2019年由elestvier有限公司发布

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号