...
首页> 外文期刊>Thin-Walled Structures >Dynamic analysis of non-planar coupled shear walls with stiffening beams using Continuous Connection Method
【24h】

Dynamic analysis of non-planar coupled shear walls with stiffening beams using Continuous Connection Method

机译:连续连接法对加筋梁非平面剪力墙的动力分析

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper, the dynamic analysis of non-planar non-symmetrical coupled shear walls on a rigid foundation has been considered. The analysis deals with coupled shear walls having a finite number of stiffening beams, whose properties vary from region to region along the height. In the analysis, Continuous Connection Method (CCM) and Vlasov's theory of thin-walled beams are employed to find the stiffness matrix of the structure. The system mass matrix has been found in the form of lumped masses at the heights where the unit forces have been applied. Following the free vibration analysis, uncoupled stiffness, damping and mass matrices have been found employing the mode superposition method. A time-history analysis has been carried out using Newmark numerical integration method to find the system displacement vector for every time step. Finally, a computer program has been prepared in Fortran language and an asymmetrical example has been solved. The results have been verified via comparisons with those of the SAP2000 structural analysis program using frame method and a perfect match has been observed.
机译:本文考虑了刚性基础上非平面非对称耦合剪力墙的动力分析。该分析处理的是具有有限数量的加劲梁的耦合剪力墙,这些加筋梁的特性沿高度在不同区域之间变化。在分析中,采用连续连接法(CCM)和弗拉索夫的薄壁梁理论来找到结构的刚度矩阵。已经发现在单位力已经施加的高度处,系统质量矩阵以集中质量的形式出现。经过自由振动分析,已经找到了采用模式叠加法的刚度,阻尼和质量矩阵。使用Newmark数值积分方法进行了时程分析,以找到每个时间步的系统位移矢量。最后,用Fortran语言编写了一个计算机程序,并解决了一个不对称示例。通过使用框架方法与SAP2000结构分析程序的结果进行比较,验证了结果,并观察到了完美的匹配。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号