首页> 外文期刊>Thin-Walled Structures >Elastic lateral-torsional instability of monosymmetric shear deformable fixed arches under a localized uniform radial load
【24h】

Elastic lateral-torsional instability of monosymmetric shear deformable fixed arches under a localized uniform radial load

机译:在局部均匀径向载荷下,单对称剪切可变形固定拱的弹性横向矫正拱

获取原文
获取原文并翻译 | 示例

摘要

This paper investigates the elastic lateral-torsional instability of shear deformable fixed arches having a mono symmetric cross-section when subjected to a localized uniform radial load. Hitherto, this topic has not been addressed in the open literature. The complex in-plane internal actions in a fixed arch with a monosymmetric section are produced by a localized uniform radial load and are affected by the arc length of localized load segment. When the in-plane internal actions reach certain magnitudes, the fixed arch may fail suddenly in a lateral-torsional instability mode. The lateral-torsional instability loads of such arches considering shear deformations under a localized uniform radial load are difficult to obtain and are investigated in this paper. The strain-displacement relationships for the longitudinal normal axial and shear strains in the arch with a mono symmetric section are derived. In-plane analyses for the internal forces produced by the localized uniform radial load are firstly carried out. The analytical solution for the lateral-torsional instability load accounting for shear deformations and monosymmetry is then obtained using the principle of stationary potential energy together with the Rayleigh-Ritz method and compared with ANSYS numerical results. It is found that the monosymmetry parameter, the shear deformations, the slenderness ratio and the arc length of the localized load segment have considerable effect on the lateral-torsional instability load of fixed arches with a monosymmetric section.
机译:本文研究当经受局部均匀的径向负荷具有单对称横截面的剪切变形的固定拱的弹性横向扭转不稳定性。迄今为止,这个话题还没有在公开的文献中解决。在一个固定的拱形的复杂平面内内部动作用单对称部分是通过局部均匀的径向负荷产生的并且通过局部负载分段的弧长都受到影响。当在面内内部动作达到一定的大小,固定拱可以在横向扭转不稳定性模式突然失败。考虑局部均匀的径向负荷下剪切变形这样拱弯扭负荷不稳定难以获得和在本文进行了研究。在与单对称部分的拱的长度正常的轴向和切向应变的应变 - 位移关系的。面内通过局部均匀的径向负荷产生的内力分析首先进行。然后,使用与瑞利 - 里兹法静止势能在一起的原理获得用于横向扭转不稳定负载占剪切变形和monosymmetry的解析解,并用ANSYS数值结果进行比较。据发现,monosymmetry参数,剪切变形,长细比和局部负荷段的弧长具有带有单对称部分上固定拱的横向扭转不稳定性负荷相当大的影响。

著录项

  • 来源
    《Thin-Walled Structures》 |2021年第3期|107394.1-107394.15|共15页
  • 作者单位

    Guangzhou Univ Guangzhou Univ Tamkang Univ Joint Res Ctr Engn St Guangzhou Peoples R China;

    Foshan Univ Sch Transportat Civil Engn & Architecture Foshan Peoples R China;

    Guangzhou Univ Guangzhou Univ Tamkang Univ Joint Res Ctr Engn St Guangzhou Peoples R China;

    Guangzhou Univ Guangzhou Univ Tamkang Univ Joint Res Ctr Engn St Guangzhou Peoples R China|UNSW Sydney Sch Civil & Environm Engn Ctr Infrastruct Engn & Safety Sydney NSW Australia;

    Guangzhou Univ Guangzhou Univ Tamkang Univ Joint Res Ctr Engn St Guangzhou Peoples R China|UNSW Sydney Sch Civil & Environm Engn Ctr Infrastruct Engn & Safety Sydney NSW Australia;

    Guangzhou Univ Guangzhou Univ Tamkang Univ Joint Res Ctr Engn St Guangzhou Peoples R China;

    Guangzhou Univ Guangzhou Univ Tamkang Univ Joint Res Ctr Engn St Guangzhou Peoples R China;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Lateral-torsional instability; Localized uniform radial load; Monosymmetric I-Section and box-section; Fixed arch; Shear deformations;

    机译:横向扭转不稳定性;局部均匀径向载荷;单次称微秒和盒子部分;固定拱门;剪切变形;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号