首页> 外文期刊>Thin Solid Films >The electrical and structural properties of carbon nanotubes grown by microwave plasma-enhanced chemical vapor deposition method for organic thin film transistor
【24h】

The electrical and structural properties of carbon nanotubes grown by microwave plasma-enhanced chemical vapor deposition method for organic thin film transistor

机译:微波等离子体增强化学气相沉积法制备有机薄膜晶体管的碳纳米管的电学和结构性能

获取原文
获取原文并翻译 | 示例
           

摘要

Carbon nanotubes (CNTs) were grown on Ni/TiN/Si and Ni/TiN/glass substrates by microwave plasma enhanced chemical vapor deposition using methane and hydrogen gases. Firstly, TiN buffer (200 nm) and Ni catalyst (60 nm) layers were deposited on the glass and Si wafers by radio frequency magnetron sputtering method. The substrate DC bias voltage as the main process parameter was changed from 0 to - 250 V in - 50 V intervals and the synthesis temperature was maintained at the condition of 600 ℃. The effects of DC bias voltage on structural and electrical properties of the synthesized CNTs were investigated. The length of CNTs is changed by supplying substrate DC bias voltage. It is observed that negative bias is more Profitable for obtaining the vertically aligned CNTs than that without bias. As the multi-walled CNTs, the increase of DC bias voltage decreases the I_d/I_g ratio and the disorder of CNTs, and also it is attributed to the improvement of the crystal quality of CNTs and the reduction of conductivity of CNTs.
机译:通过使用甲烷和氢气的微波等离子体增强化学气相沉积,在Ni / TiN / Si和Ni / TiN /玻璃衬底上生长碳纳米管(CNT)。首先,通过射频磁控溅射法在玻璃和硅片上沉积TiN缓冲层(200 nm)和Ni催化剂(60 nm)。作为主要工艺参数的衬底直流偏置电压以-50 V的间隔从0变为-250 V,合成温度保持在600℃。研究了直流偏置电压对合成碳纳米管结构和电性能的影响。 CNT的长度通过提供衬底直流偏置电压来改变。观察到,与没有偏压的情况相比,负偏压对于获得垂直排列的CNT更有利。作为多壁CNT,DC偏置电压的增加降低了I_d / I_g比和CNT的无序度,这也归因于CNT的晶体质量的改善和CNT的电导率的降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号