...
首页> 外文期刊>Thin Solid Films >Effect of surface passivation by a low pressure and temperature environment-grown thermal oxide layer for multi-crystalline silicon solar cells
【24h】

Effect of surface passivation by a low pressure and temperature environment-grown thermal oxide layer for multi-crystalline silicon solar cells

机译:低压高温环境生长的热氧化层对多晶硅太阳能电池表面钝化的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

In this study, we show that the efficiency and carrier life time of multi-crystalline silicon solar cells were significantly improved by using a low pressure (20,000 Pa) and temperature (650 °C~750 °C) environment grown thermal oxide (TO) as the surface passivation layer. In this experiment, during the first stage, the oxidation process was done at 650 °C and a lower pressure of 20,000 Pa for 2 mins under the flow a gas mixture of N2/O2in ratio of 2:1. In the second stage, a temperature of 750 °C was used at the same pressure for the post-growth annealing process under a pure N2ambient for 25 mins. Consequently, conversion efficiency was significantly increased by 0.55% with the surface passivation layer grown by low pressure and temperature TO process. The sheet resistance, carrier lifetime, internal quantum efficiency (IQE), increased by 6.32 Ω/sq., 22.18 μs, 4.33%, respectively, and the average reflection was reduced of 0.62%. Thus, the low pressure and temperature thermal oxidation process was an efficient way to increase the efficiency of the multi-crystalline silicon solar cells.
机译:在这项研究中,我们表明通过使用低压(20,000 Pa)和温度(650 C〜750 C)环境生长的热氧化物(TO)可以显着提高多晶硅太阳能电池的效率和载流子寿命作为表面钝化层。在该实验中,在第一阶段中,在N2 / O2比为2:1的混合气体流下,在650°C和20,000 Pa的低压下进行2分钟的氧化过程。在第二阶段中,在纯N2气氛下以750°C的温度在相同压力下进行后生长退火,持续25分钟。因此,通过低压和温度TO工艺生长的表面钝化层使转化效率显着提高了0.55%。薄层电阻,载流子寿命,内部量子效率(IQE)分别增加了6.32Ω/ sq。,22.18μs和4.33%,平均反射率降低了0.62%。因此,低压高温热氧化工艺是提高多晶硅太阳能电池效率的有效途径。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号