A study of supply and system noise rejection for a pseudodifferential amplifier is presented in this paper. This pseudodifferential amplifier is aimed at high data-rate disk drive signal sensing and preamplification applications. This high rejection was achieved by improving the rejection of the pseudodifferential amplifier and also by carefully designing the interconnect flex circuit where the preamplifier is mounted. The measured rejection to power supply, ground and system noise is above 50 dB over a 300 MHz bandwidth. This is significant for a pseudodifferential amplification system. The gain of the preamplifier is 47 dB and write mode to read mode switching time is 210 ns. This preamplifier currently supports disk drive data rates over 270 Mb/s.
展开▼