...
首页> 外文期刊>IEEE Journal of Solid-State Circuits >An analog beam-forming circuit for ultrasound imaging using switched-current delay lines
【24h】

An analog beam-forming circuit for ultrasound imaging using switched-current delay lines

机译:使用开关电流延迟线进行超声成像的模拟波束形成电路

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

A mixed-signal integrated circuit implements 1120 analog memory points arranged in 16 independent fully programmable delay lines in a 0.8 /spl mu/m CMOS technology. It demonstrates the feasibility of large scale mixed-mode circuits using the switched current technique. The die area of the chip is 72 mm/sup 2/ and incorporates 16 rather large and complex analog blocks, which take advantage of special design techniques developed in order to keep power consumption at a reasonable level and to eliminate second-order effects due to long power and signal lines. At the nominal 64 MHz sampling rate, harmonic distortion is -48 dB, dynamic range is above 60 dB, and power consumption is 1.22 W from a single 5 V supply.
机译:混合信号集成电路采用0.8 / spl mu / m CMOS技术实现了1120个模拟存储点,这些模拟存储点排列在16条独立的完全可编程延迟线中。它证明了使用开关电流技术的大规模混合模式电路的可行性。芯片的管芯面积为72 mm / sup 2 /,并包含16个相当大且复杂的模拟模块,这些模块利用开发的特殊设计技术将功耗保持在合理的水平,并消除了由于长电源线和信号线。在标称64 MHz采样率下,单5V电源的谐波失真为-48 dB,动态范围大于60 dB,功耗为1.22W。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号