首页> 外文期刊>IEEE Journal of Solid-State Circuits >An Interference-Robust Receiver for Ultra-Wideband Radio in SiGe BiCMOS Technology
【24h】

An Interference-Robust Receiver for Ultra-Wideband Radio in SiGe BiCMOS Technology

机译:SiGe BiCMOS技术的超宽带无线电干扰强接收器

获取原文
获取原文并翻译 | 示例
       

摘要

A 3.1-4.8 GHz ultra-wideband (UWB) receiver front-end for high data rate, short-range communication is presented. The receiver, based on the Multi Band OFDM Alliance (MBOA) standard proposal, consists of a zero-IF receive chain and an ultra-fast frequency-hopping synthesizer. The combination of high-linearity RF circuits, aggressive baseband filtering and low local oscillator spurs from the synthesizer results in an interference-robust receiver, having the ability to co-exist with systems operating in the 2.4-GHz and 5-GHz ISM bands. The packaged device shows an overall noise figure of 4.5 dB and has a measured input IP3 of -6 dBm and input IP2 of +25 dBm. Spurious tones generated by the synthesizer are below -45 dBc and -50 dBc in the 2.4-GHz and 5-GHz ISM bands, respectively. The hopping speed is well below the required 9.5 ns. The complete receive chain has been realized in a 0.25 μm BiCMOS technology and draws 78 mA from a 2.5-V supply.
机译:提出了用于高数据速率,短距离通信的3.1-4.8 GHz超宽带(UWB)接收器前端。该接收器基于多频带OFDM联盟(MBOA)标准提案,由零中频接收链和超快速跳频合成器组成。高线性度RF电路,激进基带滤波和来自合成器的低本地振荡器杂散的结合,导致了抗干扰能力强的接收器,能够与在2.4 GHz和5 GHz ISM频带中运行的系统共存。封装后的设备的总噪声系数为4.5 dB,测量的输入IP3为-6 dBm,输入IP2为+25 dBm。在2.4 GHz和5 GHz ISM频段,合成器产生的杂音分别低于-45 dBc和-50 dBc。跳跃速度远低于所需的9.5 ns。完整的接收链已采用0.25μmBiCMOS技术实现,并从2.5 V电源汲取了78 mA电流。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号