A 60-GHz 16QAM/8PSK/QPSK/BPSK Direct-Conversion Transceiver for IEEE802.15.3c

摘要

This paper presents a 60-GHz direct-conversion transceiver using 60-GHz quadrature oscillators. The transceiver has been fabricated in a standard 65-nm CMOS process. It in cludes a receiver with a 17.3-dB conversion gain and less than 8.0-dB noise figure, a transmitter with a 18.3-dB conversion gain, a 9.5-dBm output 1 dB compression point, a 10.9-dBm saturation output power and 8.8-% power added efficiency. The 60-GHz frequency synthesizer is implemented by a combination of a 20-GHz PLL and a 60-GHz quadrature injection-locked oscillator, which achieves a phase noise of -95 dBc/Hz@l MHz-offset at 60 GHz. The transceiver realizes IEEE802.15.3c full-rate wireless communication for all 16QAM/8PSK/QPSK/BPSK modes, and the communication distances with the full data rate using 2.16-GHz bandwidth, measured with an antenna built in the package, are 2.7-m (BPSK/QPSK) and 0.2-m (8PSK/16QAM). The measured maximum data rates are 8 Gb/s in QPSK mode and 11 Gb/s in 16QAM mode over a 5 cm wireless link within a bit error rate (BER) of <;10-3. The transceiver consumes 186 mW from a 1.2-V supply voltage while transmitting and 106 mW from 1.0-V supply voltage while receiving. Both transmitter and receiver are driven by a 20-GHz PLL, which consumes 66 mW, including output buffer, from a 1.2-V supply voltage.