Application of an adapted single-/half- effect NH_3/H_2O absorption chiller in tri-generation and solar cooling systems

摘要

Nowadays cooling loads make a considerable contribution of total energy consumption. Therefore, the focus has to be on the development of efficient sustainable cooling systems. This paper analyses the influence of different heat rejection units to a solar- or CHP-driven single-/half- effect ammonia/water absorption chiller.A functional model of the chiller based on flat plate heat exchangers which is switchable between single- and half effect is built and measured. Chiller performance is evaluated in Hardware-in-the-Loop tests in terms of steady state and dynamic tests. Advanced component models based on lookup tables with dynamic behaviour are derived and used for annual simulations. TRNSYS simulation studies are used to analyse the annual impact on technical and economic performance of the new single-/half- effect concept in various configurations and boundary conditions.The single/half effect chiller shows a good and stable performance over a wide range of operating conditions. It offers an operation up to 45 degrees C heat rejection temperature and enables the usage of a dry cooler in hot and arid climates. The application for solar- and CHP driven systems are reaching non-renewable primary energy savings of 30-70% at almost equal costs compared to conventional systems.