Seismic behaviour of reinforced embankments in dynamic centrifuge model tests

摘要

A series of dynamic centrifuge model tests was conducted to investigate the effects of reinforcement on the seismic behaviour of hillside embankments consisting of sandy soils and resting on stiff base slopes. In total, three types of seismic reinforcements, namely, largescale gabions, drainage-reinforcing piles, and ground anchors with pressure plates, were employed in the tests. The test results showed that: (1) the seismic performance of both lower and higher embankments was remarkably improved by installing large-scale gabions at the toe as they restrained the completion of the formation of sliding planes; (2) the installation of drainage-reinforcing piles at the embankment toe was rather effective in reducing the overall earthquake-induced deformation due to their high permeability and restraint effect against sliding displacement at the reinforced region; and (3) the embankments improved by ground anchors with pressure plates were not vulnerable to earthquake-induced damage due to their constraint effects even under high water table conditions. The improvement effects by the above-mentioned three types of reinforcements were presented by evaluating the global safety factors based on the results of a series of triaxial compression tests. (C) 2018 Production and hosting by Elsevier B.V. on behalf of The Japanese Geotechnical Society.