首页> 外文期刊>Pomiary Automatyka Kontrola >Pomiar zmian topologii obiektów na podstawie wyznaczania parametrów położenia markerów
【24h】

Pomiar zmian topologii obiektów na podstawie wyznaczania parametrów położenia markerów

机译:基于确定标记位置参数的对象拓扑变化测量

获取原文
获取原文并翻译 | 示例

摘要

The concept and a prototype solution of measuring topology changes of industrial infrastructure objects with use of distance and angle measurements arc presented in the paper. A scheme of diagnostic model preparation based on the available documentation material is presented in Section 2. The developed solution allows tracking the displacement of multiple points marked with special markers. The block diagram of the application logic responsible for identifying markers is shown in Fig 3. The Labview environment with implemented IMAQ modules is used for automatic image recognition. The measurement data arc derived from the coupled rangefinder camera, and the markers tracking was carried out using a biaxial motor precision. The system uses a set of mirrors allowing a distance measurement to a point located exactly in the camera optical axis. The schematic arrangement is shown in Fig 2. The measurement results of angles and distances for a sample marker are shown in Figs. 4, 5 and 6. The uncertainty of determining the coordinates obtained from simulations and experimental studies is presented in the paper. Analysis of the identification marker for different lighting conditions was performed In Section 4 there are described the data format and the model graphical visualization. The range of possible applications of the system is discussed. The presented system is relatively cheap and is a mobile solution for diagnosing changes in the installation.%W artykule przedstawiono koncepcję i prototypowe rozwiązanie przeprowadzania pomiaru zmian topologii obiektów infrastruktury przemysłowej z wykorzystaniem pomiaru odległości i pomiarów kątów. Opracowane rozwiązanie pozwala na śledzenie przemieszczenia wielu punktów oznaczonych specjalnymi markerami. Zaprezentowano wyniki niepewności wyznaczenia współrzędnych uzyskane z badań symulacyjnych i eksperymentalnych. Wykonano analizę identyfikacji markera dla różnych warunków oświetleniowych. Przedstawiono model graficznej prezentacji uzyskanych danych oraz spektrum możliwych zastosowań systemu.
机译:本文提出了使用距离和角度测量来测量工业基础设施对象的拓扑变化的概念和原型解决方案。第2部分介绍了基于可用文档材料的诊断模型准备方案。开发的解决方案允许跟踪用特殊标记标记的多个点的位移。负责标识标记的应用程序逻辑的框图如图3所示。带有已实现IMAQ模块的Labview环境用于自动图像识别。测量数据来自耦合的测距仪摄像机,并且使用双轴电机精度进行标记跟踪。该系统使用一组反射镜,可以测量到恰好在相机光轴上的点的距离。示意性布置在图2中示出。样品标记的角度和距离的测量结果在图2和图3中示出。在图4、5和6中进行了介绍。确定了从模拟和实验研究获得的坐标的不确定性。在不同的照明条件下进行了识别标记的分析。在第4节中,描述了数据格式和模型图形化可视化。讨论了该系统可能的应用范围。所展示的系统相对便宜,并且是用于诊断安装中的变化的移动解决方案。 Opracowanerozwiązaniepozwala naśledzenieprzemieszczenia wielupunktówoznaczonych specjalnymi markerami。 Zaprezentowano wynikiniepewnościwyznaczeniawspółrzędnychuzyskane zbadańsymulacyjnych i eksperymentalnych。 Wykonano分析identyfikacji marka dlaróżnychwarunkówoświetleniowych。 Przedstawiono模型graficznej prezentacji uzyskanych danych oraz spektrummożliwychzastosowańsystemu。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号