System kontrolno-pomiarowo-symulacyjny czasu rzeczywistego do badań metod aktywnej redukcji drgań

摘要

W artykule przedstawiono koncepcję, a następnie wybrane, kluczowe szczegóły budowy systemu kontrolno-pomiarowo-symulacyjnego czasu rzeczywistego. System ten znajduje zastosowanie w badaniach metod aktywnej redukcji drgań. Zamieszczono przykłady rezultatów badań obrazujące możliwości zastosowania systemu. Dzięki systemowi uzyskano również możliwość szybszego prototypowania algorytmów sterowania oraz obniżono koszty badań.%One of the important problems that may be encountered during milling operations are tool-workpiece relative vibrations [1], There are many methods of their reduction, particularly including active ones [1-10]. In the paper, an idea of a real time control, measurement and simulation system utilised for studies on active vibration control is presented and its selected key elements are described. The system is based on the PXI platform and is programmed in Lab View RT environment (Figs. 1, 2).The organisation of the main control loops in control programs is described in detail (Fig. 3). In order to generate a force acting on the plate, one or two pizeoactutators are used (Fig. 4). They allow not only actively reducing but also exciting vibrations, which are used in Hardware-in-the-Loop (HIL) simulations. In this approach some parts of the controlled system (i.e. cutting process) are simulated, while the others are real (i.e. machined plate). This reduces the time of control law prototyping and testing significantly. It also reduces research costs as there is less need for performing experiments on a real milling centre. The presented system allows measuring vibrations, calculating a control signal for actuators and performing HIL simulations with the same hardware and software. The presented examples of the results obtained thanks to the system (Figs. 5-7) show its versatility and effectiveness. This confirms that the initial idea and chosen programming solutions are correct.