System pomiarowy typu Master-Slave z bezprzewodowymi układami akwizycji danych typu Smart Sensor o wejściu napięciowym

摘要

Artykuł przedstawia bezprzewodowy system pomiarowy, złożony z kart akwizycji danych o wejściu napięciowym, opracowany na potrzeby pracy magisterskiej. Zadaniem systemu jest akwizycja, archiwizacja, monitorowanie oraz przesyłanie danych pomiarowych z urządzenia Slave do Master. Urządzenia akwizycyjne zostały wykonane jako urządzenia typu SMART SENSOR. Opracowany system pomiarowy został zastosowany do akwizycji danych w systemie odzyskiwania energii z otwieranych i zamykanych drzwi.%This paper presents wireless measurement system, consist of a data acquisition cards with voltage inputs, developed as the MSc thesis. The purpose of the system is acquisition, archiving, monitoring and transfer measurement data from the slave device to the master device (Fig. 1). Acquisition cards has been made as a SMART SENSOR device (Fig. 2). Data acquisition card is a slave module in the measurement system. It allows to acquire the measurement data with maximum 8 inputs with adjustable delay time between the measurements. The data can be saved to a SD card, and sent by radio in the ISM band (Fig. 3). DAQ card configuration is done by a terminal application located on PC (Fig. 4). The network gateway consists of a manager, a user interface module (Fig. 5), the power module and converter UART / USB. Developed measurement system has been used as the data acquisition system in recover energy from opening and closing door circuit. The short measurement series were done for acquiring voltage (Fig. 6) and current (Fig. 7) when movement of the door was forced. Long acquisition series were done as well (Fig. 8). The long series took four days during typical office use. The measurement system can be used for monitoring various types of physical quantities by means of appropriate sensors and output voltage. Applied Gateway may be part of the monitoring and control of data acquisition DAQ cards used in the measurements.