首页> 外文期刊>Reactive & Functional Polymers >Inherently fluorescent polyaniline nanoparticles in a dynamic landscape
【24h】

Inherently fluorescent polyaniline nanoparticles in a dynamic landscape

机译:动态景观中固有的荧光聚苯胺纳米颗粒

获取原文
获取原文并翻译 | 示例
           

摘要

In this paper we report for the first time on the emissive behavior of two polyaniline (PANI) nanoparticle systems produced via oxidative chemical polymerization in the presence of either poly(vinyl alcohol) (PVA) or chitosan as polymeric stabilizers in water. The emission from PANI nanoparticles is irreversibly quenched by an increase of pH of the suspending medium from acid to neutral (chitosan-PANI) or alkaline (PVA-PANI). Conversely, PANI nanorods synthesized in the same conditions of the above, but in presence of poly(N-vinyl pyrrolidone), is not emissive at any pH. The role of the polymeric surfactant as a soft template is key in controlling the morphology and the properties of the obtained PANI dispersions. FTIR, UV-Vis absorption and photoluminescence excitation (PLE) spectra studies suggest that the emissive properties are related to the establishment of strong, non-covalent interactions between nanoscalar PANI particles and the polymeric surfactant at the pH of synthesis. Morphology examination of the three systems, by both dynamic light scattering (DLS) and Transmission Electron Microscopy (TEM), reveal that photoluminescence is associated to the presence of a genuinely 3D nanoscalar morphology, together with an ordered disposition of PANI chains into aligned crystal planes. Concomitant to the irreversible quenching of the emission signal with increasing pH, there is an evolution of the morphology leading to particle coalescence, coarsening and ultimately phase-separation, with consequent modification of PANI-poly-meric surfactant interactions, PANI chains supra-molecular organization and optical properties of the PANI nanoparticles dispersion.
机译:在本文中,我们首次报告了在聚乙烯醇(PVA)或壳聚糖作为聚合物稳定剂的情况下,通过氧化化学聚合反应制得的两种聚苯胺(PANI)纳米粒子系统的发射行为。通过将悬浮介质的pH值从酸性提高到中性(壳聚糖-PANI)或碱性(PVA-PANI),不可逆地淬灭了PANI纳米颗粒的发射。相反,在上述相同条件下但在聚(N-乙烯基吡咯烷酮)存在下合成的PANI纳米棒在任何pH下都不发光。聚合物表面活性剂作为软模板的作用是控制所得PANI分散体的形态和性能的关键。 FTIR,UV-Vis吸收和光致发光激发(PLE)光谱研究表明,发射特性与在合成pH值下纳米标量PANI颗粒与聚合物表面活性剂之间建立强的非共价相互作用有关。通过动态光散射(DLS)和透射电子显微镜(TEM)对这三个系统的形态学检查表明,光致发光与真正3D纳米标量形态的存在有关,并且PANI链有序地排列在对齐的晶面中。随着pH值的升高,发射信号不可逆地猝灭,随之而来的是形态的演变,导致颗粒聚结,变粗并最终发生相分离,从而改变了PANI-多聚表面活性剂的相互作用,PANI链的超分子结构和PANI纳米颗粒分散体的光学性质。

著录项

  • 来源
    《Reactive & Functional Polymers》 |2012年第3期|p.185-197|共13页
  • 作者单位

    Dipartimento di Ingegneria Chimica, Cestionale, Informatica, Meccanica, Universita degli Studi di Palermo, Viale delle Scienze, 90128 Palermo, Italy,CNR - Istituto di Biofisica (Palermo Unit), Via U. La Malfa 153, 90146 Palermo, Italy;

    Dipartimento di Ingegneria Chimica, Cestionale, Informatica, Meccanica, Universita degli Studi di Palermo, Viale delle Scienze, 90128 Palermo, Italy;

    Dipartimento di Ingegneria Chimica, Cestionale, Informatica, Meccanica, Universita degli Studi di Palermo, Viale delle Scienze, 90128 Palermo, Italy;

    Dipartimento di Ingegneria Chimica, Cestionale, Informatica, Meccanica, Universita degli Studi di Palermo, Viale delle Scienze, 90128 Palermo, Italy,Institute of Nuclear Chemistry and Technology, Dorodna 16,03-195 Warsaw, Poland;

    Department of Biomedical Science, The University of Sheffield, Firth Court, S10 2TN Sheffield, United Kingdom Merck Serono SpA, Via Einaudi 11, 00012 Guidonia Montecelio,Rome, Italy;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    conjugated polymers; polyaniline; nanoparticles; dispersion polymerization; photoluminescence;

    机译:共轭聚合物;聚苯胺纳米粒子分散聚合;光致发光;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号