Method for determination of the polarisation nonreciprocity in a fibre ring interferometer

摘要

A method is proposed for observation of the polarisation nonreciprocity of fibre ring interferometers (FRIs) by placing a rotating polariser at the output of an interferometer ahead of a photodetector. It is demonstrated theoretically and experimentaly that the absence of a signal for any position of the transmission axis of the polariser at the FRI output is a criterion of the absence of the polarisation nonreciprocity. It is suggested that the coaxial alignment of the anisotropic FRI components be monitored during assembly to ensure the polarisation nonreciprocity on the basis of the absence of a signal at the output of a rotating polariser. It is also shown that, when the conditions for the polarisation nonreciprocity are fulfilled, the signal from the output of a beam splitter located flush against the fibre loop output carries information about the phase characteristics of the beam splitter.