首页> 外文期刊>Quality Control, Transactions >Single-Fed Circularly Polarized Dielectric Resonator Antenna With an Enhanced Axial Ratio Bandwidth and Enhanced Gain
【24h】

Single-Fed Circularly Polarized Dielectric Resonator Antenna With an Enhanced Axial Ratio Bandwidth and Enhanced Gain

机译:单馈圆偏振介质谐振器天线,具有增强的轴向比带宽和增强增益

获取原文
获取原文并翻译 | 示例
           

摘要

A compact single-fed circularly polarized dielectric resonator antenna (DRA) with an enhanced 3-dB axial ratio bandwidth (ARBW) and gain is proposed. The DRA is implemented by joining a smaller dielectric resonator (DR) to one sidewall of a main rectangular DR and is excited by an offset vertical metallic strip. With this configuration, two sets of degenerate orthogonal modes, the TE111 mode and TE113 mode, are simultaneously excited to realize wideband circular polarization operation. Furthermore, by removing a small DR portion from the lower corner of the main DR, the boresight gains at higher frequencies are significantly enhanced. An antenna prototype is fabricated and measured to verify the performance of the proposed design. The experimental results illustrate that the proposed antenna achieves a measured 3-dB ARBW of approximately 44.73% (3.68-5.80 GHz) in conjunction with a broad -10 dB impedance bandwidth of 69.66% (2.9-6.0 GHz). The measured boresight gain is found to be 5.49 +/- 0.85 dBic within the passband with a maximum value of 6.34 dBic at 4.7 GHz. Moreover, reasonable agreement between the simulated and measured results is achieved.
机译:提出了一种具有增强的3-DB轴向比带宽(ARBW)和增益的紧凑的单馈圆极化介质谐振器天线(DRA)。通过将较小的介电谐振器(DR)连接到主矩形DR的一个侧壁来实现DRA,并且由偏移垂直金属条振动。利用这种配置,同时发生两组简并正交模式,TE111模式和TE113模式以实现宽带圆极化操作。此外,通过从主DR的下拐点移除小DR部分,较高频率下的电气增长显着增强。制造并测量天线原型以验证所提出的设计的性能。实验结果表明,该建议的天线能够与大约44.73%(3.68-5.80GHz)的3-DB ARBW结合在于69.66%(2.9-6.0GHz)的广泛-10 dB阻抗带宽。在通带内,测量的噬菌体增益在通带内为5.49 +/- 0.85 dBic,最大值为6.34 dbic,4.7 GHz。此外,实现了模拟和测量结果之间的合理达成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号