首页> 外文期刊>Progress in Palliative Care >Synthesis and characterisation of CoTiO3 powders prepared via sol-gel method
【24h】

Synthesis and characterisation of CoTiO3 powders prepared via sol-gel method

机译:溶胶-凝胶法制备CoTiO3粉体的合成与表征

获取原文
获取原文并翻译 | 示例
       

摘要

Ultrafine ilmenite CoTiO3 powders were prepared with sol-gel method. The effects of preheating treatment on the morphology of powders were studied using X-ray diffraction (XRD) and SEM. The powders were characterised as an antiferromagnetic material in crystallography and as a ceramic pigment in chromaticity. The XRD analysis revealed that single phase ilmenite CoTiO3 powders were obtained by calcining at 700°C for 3 h with and without preheating and were of vivid blue green colour and of average particle sizes of 42˙5, 41˙9 and 45˙2 nm for non-preheated and preheated powders at 300 and 400°C respectively. The calculated c/a ratio increased from 2˙7440 to 2˙7455 and 2˙7474 with increasing preheating temperature. The SEM analysis indicated that the powders were uniform in size and the size and morphology of particles changed with preheating schedules. The powders were of luminance factor of Y=19˙77 and chromaticity coordinate value of x=0˙2765 and y0˙3600.
机译:采用溶胶-凝胶法制备了钛铁矿超细CoTiO3粉末。利用X射线衍射(XRD)和扫描电镜(SEM)研究了预热处理对粉末形貌的影响。该粉末在晶体学中被表征为反铁磁材料,并且在色度中被表征为陶瓷颜料。 X射线衍射分析表明,单相钛铁矿CoTiO3粉末是通过在700°C下预热和不预热3小时而得到的,具有鲜艳的蓝绿色,平均粒径为42˙5、41˙9和45˙2nm。适用于分别在300和400°C下的非预热和预热粉末。随着预热温度的升高,计算出的c / a比值从2×7440增加到2×7455和2×7474。 SEM分析表明,粉末尺寸均匀,并且颗粒的尺寸和形态随预热时间表而变化。粉末的亮度因子为Y =19˙77,色度坐标值为x =0˙2765和y0˙3600。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号