首页> 外文期刊>Powder diffraction >Quantitative phase analysis in the Ti-Al-C ternary system by X-ray diffraction
【24h】

Quantitative phase analysis in the Ti-Al-C ternary system by X-ray diffraction

机译:X-射线衍射分析Ti-Al-C三元体系中的定量相

获取原文
获取原文并翻译 | 示例
           

摘要

Materials in the Ti-Al-C ternary system commonly contain three coexisting phases, Ti_3AlC_2, Ti_2AlC, and TiC. Quantitative phase analysis in this ternary system was investigated using X-ray diffraction. First, nonoverlap diffraction peaks were selected: the (002) peak at 2θ=9.5° for Ti_3AlC_2 (I/I_0 = 26.5), the (002) peak at 2θ= 13.0° for Ti_2AlC (I/I_0 = 39), and the (111) peak at 2θ=35.9° for TiC (I/I_0=78), respectively. Then, based on the mixing-sample method without internal standards, a set of equations was derived for determining the amounts of Ti_3AlC_2, Ti_2AlC, and TiC in a sample using the intensities of the selected diffraction peaks. Finally, the applicability and error sources for this method were investigated. The method is simple and straightforward, and is applicable to the entire Ti-Al-C ternary system, since the derivation of this equation group is self-checking.
机译:Ti-Al-C三元体系中的材料通常包含三个共存相,即Ti_3AlC_2,Ti_2AlC和TiC。使用X射线衍射研究了该三元体系中的定量相分析。首先,选择非重叠衍射峰:Ti_3AlC_2(I / I_0 = 26.5)在2θ= 9.5°处的(002)峰,Ti_2AlC(I / I_0 = 39)在2θ= 13.0°处的(002)峰, TiC(I / I_0 = 78)的(111)峰分别在2θ= 35.9°处。然后,基于没有内标物的混合样品方法,使用选定的衍射峰强度推导了一组方程,用于确定样品中Ti_3AlC_2,Ti_2AlC和TiC的量。最后,研究了该方法的适用性和误差来源。该方法简单明了,并且适用于整个Ti-Al-C三元体系,因为该方程组的推导是自检的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号