首页> 外文期刊>Oxidation of Metals >A Critique of Internal Oxidation in Alloys During the Post-Wagner Era
【24h】

A Critique of Internal Oxidation in Alloys During the Post-Wagner Era

机译:后瓦格纳时代对合金内部氧化的批评

获取原文
获取原文并翻译 | 示例
       

摘要

Wagner's classical treatment of internal oxidation (generic name allowing for reaction with oxygen, nitrogen, carbon or sulfur) assumed ideal conditions such as uninhibited dissolution of the gas, formation of spherical particles, diffusion of the oxidant in the solvent as the rate-controlling step, equilibrium conditions, etc. However, during the 45 years since his treatment, many observations have been made to complicate the idealized situation suggested by Wagner. This paper examines the most important modifications with respect to Wagner's original analysis. The following items are discussed, (a) The role of solute concentration: The parabolic kinetics are much higher than expected for Ni-Al alloys due to rapid interfacial diffusion of oxygen along the interfaces between cylindrical rods of Al_2O_3 (perpendicular to the surface) and the matrix, (b) Precipitate morphology: Spherical precipitates seem almost to be the exception. A wide variety of forms have been observed, including Widman-stdtten platelets, cylindrical rods, hexagonal plates, dendritic or "fishbone" products, etc. The competition between nucleation and growth is useful to explain the observed structures, (c) Intergranular internal oxidation: Rapid oxygen diffusion in grain boundaries may lead to a wide variety of inter-granular-precipitate structures, (d) Internal-oxide bands: Wavy, approximately parallel bands form at a finite distance beneath the surface in certain alloys having very reactive solutes, e.g., Ag-Mg. It is postulated that high stresses generated by precipitation play a major role, (e) Surface nodules of pure solvent metal: High stresses generated during precipitation cause extrusion of solute through dislocation pipes, leading to extensive nodule formation on either grain boundaries or on the grains (or both), depending on the alloy and oxidizing conditions, (f) Konstoichiometric precipitates: Either hypo- or hyperstoichiometric particles can form as very small clusters in certain alloys (Ag—Al). The nature of precursors and changes in stoichiometry during reaction are discussed, (g) Trapping of oxidant: Diffusion of the oxidant may be slowed appreciably by trapping with the solute, although no precipitates need to form. Lower-than-expected kinetics (based on normal diffusivities of the oxidant) result, (h) High-solubility-product precipitates: Concentration profiles of solute, oxidant and precipitate are quite different than those expected for low-solubility-product precipitates as considered by Wagner. In particular, a variable mole fraction of precipitate exists, and further precipitation occurs in the reaction zone after the front has passed by. Linear kinetics have been observed for some Nb-base alloys at very high temperatures and low oxygen pressures. The rate-controlling step is the arrival of oxygen at the surface and not oxygen diffusion in the metal, (i) Dual oxidants: Two gases may diffuse-simultaneously and each forms its own product with the solute. The thermo-dynamically most-stable compound forms near the surface, and the less-stable compound deeper in the alloy. The less-stable compound is subsequently converted to the more-stable compound with a concomitant release of the second oxidant. Although numerous examples have been reported of systems which do not behave as predicted by Wagner, his theory still remains as the cornerstone of our understanding and is still the starting point for virtually every study in internal oxidation.
机译:瓦格纳(Wagner)对内部氧化的经典处理(可与氧气,氮气,碳或硫反应的通用名称)假定了理想的条件,例如不受抑制的气体溶解,球形颗粒的形成,氧化剂在溶剂中的扩散作为速率控制步骤。 ,平衡条件等。然而,自他接受治疗以来的45年间,已经进行了许多观察,以使瓦格纳提出的理想情况复杂化。本文研究了有关Wagner原始分析的最重要的修改。讨论了以下各项:(a)溶质浓度的作用:由于氧沿着Al_2O_3圆柱棒(垂直于表面)之间的界面快速扩散,Ni-Al合金的抛物线动力学比预期的高得多。 (b)沉淀物形态:球形沉淀物似乎几乎是个例外。已经观察到各种各样的形式,包括Widman-stdtten血小板,圆柱棒,六角形板,树状或“鱼骨”产品等。成核和生长之间的竞争有助于解释观察到的结构,(c)晶间内部氧化:氧在晶界中的快速扩散可能导致多种晶间沉淀结构,(d)内部氧化物带:在某些具有非常活泼的溶质的合金中,波浪形,近似平行的带在表面以下有限距离处形成,例如,Ag-Mg。据推测,由沉淀产生的高应力起主要作用,(e)纯溶剂金属的表面结节:沉淀过程中产生的高应力导致溶质通过位错管挤出,导致在晶界或晶粒上形成大量的结节(或两者),取决于合金和氧化条件,(f)化学计量的沉淀:低化学计量或超化学计量的颗粒可以在某些合金(Ag-Al)中形成非常小的团簇。讨论了前体的性质和反应过程中化学计量的变化。(g)捕集氧化剂:尽管不需要形成沉淀物,但通过捕集溶质可以明显降低氧化剂的扩散。低于预期的动力学(基于氧化剂的正常扩散率),(h)高溶解度产物沉淀:溶质,氧化剂和沉淀物的浓度曲线与所考虑的低溶解度产物沉淀的预期曲线完全不同瓦格纳。特别地,存在可变摩尔分数的沉淀物,并且在前沿经过之后在反应区中进一步沉淀。对于某些Nb基合金,在非常高的温度和低的氧气压力下已经观察到线性动力学。速率控制步骤是氧气到达表面,而不是氧气在金属中扩散。(i)双重氧化剂:两种气体可以同时扩散,并且每种气体都与溶质形成自己的产物。热力学上最稳定的化合物在表面附近形成,而不太稳定的化合物在合金中更深处形成。随后将较不稳定的化合物转化为较稳定的化合物,同时释放出第二种氧化剂。尽管已经报道了许多实例,表明这些系统的行为不像瓦格纳所预测的那样,但他的理论仍然是我们理解的基石,并且实际上仍然是内部氧化研究的起点。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号