Organic photovoltaic devices with enhanced efficiency processed from non-halogenated binary solvent blends

摘要

The development of processing routes to fabricate organic photovoltaic devices (OPVs) using non-halogenated solvents is a necessary step towards their eventual commercialisation. To address this issue, we have used Hansen solubility parameter analysis to identify a non-halogenated solvent blend based on a mixture of carbon disulphide and acetone. This solvent blend was then used to deposit a donor-acceptor polymer-fullerene thin-film that was then used as the active layer of bulk-heterojunction OPV. For the benchmark polymer: fullerene system PCDTBT:PC_(70)BM, a power conversion efficiency of 6.75% was achieved; a 20% relative improvement over reference cells processed using the chlorinated-solvent chlorobenzene. Improvements in device efficiency are attributed to an increase in electron and hole conductivity resulting from enhanced fullerene crystallisation; a property that leads to enhanced device efficiency through improved charge extraction.