首页> 外文期刊>Optical Switching and Networking >Ring Optical Packet switched (OPS) network: Quality of Service (QpS) and traffic model
【24h】

Ring Optical Packet switched (OPS) network: Quality of Service (QpS) and traffic model

机译:环形光分组交换(OPS)网络:服务质量(QpS)和流量模型

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Optical Packet Switched (OPS) technology is under study as a promising solution for addressing the rapid growth of network-intensive applications having different Quality of Service (QoS) requirements. By employing Optical Circuit Switched (OCS) networks, an optimized Packet Loss Ratio (PLR), delay and Packet Delay Variation (PDV) performance can be obtained. It is, however, very demanding to offer a QoS comparable to OCS network through the OPS network in order to support a significant and growing number of applications. Thus, moving from OCS to OPS network, QoS is a critical issue. Hence, this paper analyzes the QoS requirements of network-intensive applications and services. Moreover, the paper derived an expression for performance metrics of a single OPS switch and ring OPS network. It is found that the International Telecommunication Union- Telecommunication (ITU-T) classification is extended with the new requirements of applications and services. For example, the upper bound delay, PDV and PLR of video streaming requires (100 ms, 400 ms), 50 ms and 1E(-05) respectively. In this work, these values are improved as delay within 10 ms, PDV in micro seconds and PLR of 1E(-07) at full load. It is also shown that a Fixed Delay Line (FDL) has to be considered when low PLR is required and when PDV and delay are not critical issues. (C) 2018 Elsevier B.V. All rights reserved.
机译:光分组交换(OPS)技术正在研究中,它是解决具有不同服务质量(QoS)要求的网络密集型应用的快速增长的有希望的解决方案。通过使用光电路交换(OCS)网络,可以获得优化的分组丢失率(PLR),延迟和分组延迟变化(PDV)性能。然而,非常需要通过OPS网络提供与OCS网络相当的QoS,以支持大量且不断增长的应用。因此,从OCS转移到OPS网络,QoS是一个关键问题。因此,本文分析了网络密集型应用程序和服务的QoS要求。此外,本文推导了单个OPS交换机和环形OPS网络的性能指标表达式。可以发现,国际电信联盟-电信(ITU-T)分类随着应用程序和服务的新要求而扩展。例如,视频流的上限延迟,PDV和PLR分别需要(100 ms,400 ms),50 ms和1E(-05)。在这项工作中,这些值得到了改善,例如延迟在10 ms以内,PDV以微秒为单位,满载时的PLR为1E(-07)。还表明,当需要低PLR且PDV和延迟不是关键问题时,必须考虑使用固定延迟线(FDL)。 (C)2018 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号