...
首页> 外文期刊>Optical Materials >Preparation and laser performance of Nd-doped yttrium lanthanum oxide transparent ceramic
【24h】

Preparation and laser performance of Nd-doped yttrium lanthanum oxide transparent ceramic

机译:掺钕钇氧化镧透明陶瓷的制备及激光性能

获取原文
获取原文并翻译 | 示例
           

摘要

1,5 at.% Nd:Y_(1.8)La_0.2)O_3 transparent ceramic was fabricated by a solid-state reaction method and sintered at 1650-1700 °C for 40-50 h under H2 atmosphere. The spectroscopic properties were investigated at room temperature. The transparent ceramic has excellent spectroscopic properties, with the absorption cross section of 1.50 x 10~(20)cm~2 and broad full width at half maximum (FWHM) of about 8 nm at LD wavelength 806 nm, the emission cross section of 2.03 x 10~(20) cm~2 at 1079 nm, and the decay lifetime of 200 μs. Laser performance was carried out using an uncoated Nd:Y_(1.8)La_0.2)O_3 ceramic plate under laser diode end-pumping without any water cooling device. The room temperature thermal conductivity of this ceramic is 6.20 W/mK. For Nd:Y_(1.8)La_0.2)O_3 ceramic laser, a maximum output power of 62 mW was obtained at 1079 nm under a 808 nm diode pump.
机译:通过固相反应法制备了1.5at。%的Nd:Y_(1.8)La_0.2)O_3透明陶瓷,并在1650-1700°C的H2气氛下烧结40-50 h。在室温下研究光谱性质。透明陶瓷具有出色的光谱特性,在LD波长806 nm处的吸收截面为1.50 x 10〜(20)cm〜2,半峰宽(FWHM)约为8 nm,发射截面为2.03在1079 nm处x 10〜(20)cm〜2,衰减寿命为200μs。激光性能是使用未涂覆的Nd:Y_(1.8)La_0.2)O_3陶瓷板在激光二极管端泵下进行的,无需任何水冷装置。该陶瓷的室温热导率为6.20 W / mK。对于Nd:Y_(1.8)La_0.2)O_3陶瓷激光器,在808 nm二极管泵下,在1079 nm处可获得62 mW的最大输出功率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号