首页> 外文期刊>Optical and quantum electronics >Highly Q-factor elliptical absorber with cross slot as refractive index sensor in optical spectrum
【24h】

Highly Q-factor elliptical absorber with cross slot as refractive index sensor in optical spectrum

机译:高度Q因子椭圆吸收器,具有交叉插槽作为光谱中的折射率传感器

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Highly Q-factor plasmonic absorbers are attractive for achieving the higher figure of merit (FOM) and sensitivity in the optical sensors. In this work, an elliptical plasmonic absorber as metal-insulator-metal element is studied analytically with a cross-slot for increasing the Q-factor to concentrate the energy in gaps as a refractive index sensor for the mid-infrared spectrum. The elliptical absorber shows dual-band characteristic in the range of the 100 to 500 THz with sensitivity to incident wave mode and maximum Q-factor of 462 and 227 for TE and TM modes. The final model is selected based on parametric studies for the elliptical absorber for both TE and TM mode and it is simulated with the time-domain method. Finally, the proposed absorber is utilized as an optical sensor with maximum FOM is 88.2 RIU~(-1) (refractive index unit) and sensitivity of 476 nm/RIU where the nanoparti-cle is coated with the material under test with refractive indices of 1 to 1.5. So, this optical sensor can be used for a wide range of applications such as detecting blood groups or chemical material.
机译:高度Q系数的等离子体吸收器对于实现更高的优点(FOM)和光学传感器的灵敏度是有吸引力的。在这项工作中,用横槽分析地研究了作为金属 - 绝缘体 - 金属元件的椭圆形等离子体吸收器,用于增加Q因子以将间隙中的能量集中在中红外光谱中的折射率传感器。椭圆形吸收器在100至500THz的范围内显示出的双带特性,灵敏度与入射波模式和TM和TM模式的最大Q系数为462和227。基于用于TE和TM模式的椭圆吸收器的参数研究选择最终模型,并用时域方法模拟。最后,所提出的吸收器用作最大FOM的光学传感器为88.2 Riu〜(-1)(折射率单元)和476nm / RiU的灵敏度,其中纳米粉粒子涂有折射率的折射率1到1.5。因此,该光学传感器可用于各种应用,例如检测血液组或化学材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号