...
首页> 外文期刊>Optical and quantum electronics >Laser-induced synthesis of nanostructured metal-carbon clusters and complexes
【24h】

Laser-induced synthesis of nanostructured metal-carbon clusters and complexes

机译:激光诱导的纳米结构金属-碳簇和配合物的合成

获取原文
获取原文并翻译 | 示例

摘要

The synthesis of nanostructured metal-carbon materials by laser irradiation is an actual branch of laser physics and nanotechnology. Laser sources with different pulse duration allow to change the heating rate with realization of different transition scenarios and synthesis materials with various physical properties. We study the process of the formation of nanostructured metal-carbon clusters and complexes using laser irradiation of colloidal systems which have been consisted of carbon micro- nanoparticle and nanopar-ticle of noble metals. For carbon nanoparticle synthesis we use the method of laser ablation in liquid. For the realization of different regimes of laser surface modification of the target (glassycarbon and shungite) and the formation of micro- nanoparticle in a liquid the YAG:Nd laser with a pulse duration 0.5 ms up to 20 ms (pulse energy up to 50 J) was applied. We have used the CW-laser with moderate intensity in liquid (water or ethanol) for nanoparticle of noble metals synthesis. Thus, colloidal systems were obtained by using CW-laser with λ= 1.06 μm, I ~ 10~(5-6) W/cm~2, and t = 10 min. The average size of resulting particles was approximately about 10-100 nm. The nanoparticle obtaining was provided in the colloidal solution with different laser parameters. In this work we investigated the mechanism of the metal-carbon cluster formation during the process of colloidal system irradiation which has been consisted of separate carbon, silver and gold nanoparticles. This system was irradiated by nanosecond laser (100 ns) with average power up to 50 W.
机译:通过激光辐照合成纳米结构的金属碳材料是激光物理学和纳米技术的实际分支。具有不同脉冲持续时间的激光源可通过实现不同的过渡方案和具有各种物理特性的合成材料来改变加热速率。我们研究了使用胶体体系的激光辐照形成纳米结构金属-碳簇和络合物的过程,该胶体体系由碳纳米微粒和贵金属纳米微粒组成。对于碳纳米颗粒的合成,我们使用液体中的激光烧蚀方法。为了实现靶材(玻璃碳和重晶石)的不同激光表面改性方案以及在液体中形成纳米微粒,YAG:Nd激光器的脉冲持续时间为0.5 ms至20 ms(脉冲能量高达50 J )已应用。我们已经在液体(水或乙醇)中使用了中等强度的连续激光,用于合成贵金属的纳米粒子。因此,通过使用CW激光器获得胶体体系,λ= 1.06μm,I〜10〜(5-6)W / cm〜2,t = 10分钟。所得颗粒的平均尺寸为约10-100nm。获得的纳米颗粒以不同的激光参数在胶体溶液中提供。在这项工作中,我们研究了胶体系统辐射过程中金属-碳簇的形成机理,该过程由分离的碳,银和金纳米颗粒组成。该系统由纳秒激光(100 ns)照射,平均功率高达50W。

著录项

  • 来源
    《Optical and quantum electronics 》 |2016年第11期| 505.1-505.8| 共8页
  • 作者单位

    Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia 600000;

    Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia 600000;

    Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia 600000;

    Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia 600000;

    Saint-Petersburg State University, St. Petersburg, Russia 199034;

    Saint-Petersburg State University, St. Petersburg, Russia 199034;

    Saint-Petersburg State University, St. Petersburg, Russia 199034;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Metal-carbon cluster; Carbyne; Colloidal system; Laser action;

    机译:金属碳簇;卡宾;胶体系统;激光动作;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号