首页> 外文期刊>Nuclear Instruments & Methods in Physics Research >Analysis of SMELS and reference materials for validation of the k_0-based internal monostandard NAA method using in-situ detection efficiency
【24h】

Analysis of SMELS and reference materials for validation of the k_0-based internal monostandard NAA method using in-situ detection efficiency

机译:使用现场检测效率对SMELS和参考材料进行分析以验证基于k_0的内部单标准NAA方法

获取原文
获取原文并翻译 | 示例
           

摘要

Three synthetic multielement standards (SMELS I, II and III) and two reference materials (RMs), SL-3 and Soil-7 of IAEA were analyzed for validation of the k_0-based internal monostandard neutron activation analysis (IM-NAA) method utilizing in-situ relative detection efficiency. The internal monostandards used in SMELS and RMs were Au and Sc, respectively. The samples were irradiated in Apsara and Dhruva reactors, BARC and radioactive assay was carried out using a 40% relative efficiency HPGe detector coupled to an 8 k MCA. Concentrations of 23 elements were determined in both SMELS and RMs. In the case of RMs, concentrations of a few elements, whose certified values are not available, could also be determined. The % deviations for the elements determined in SMELS with respect to the assigned values and RMs with respect to certified values were within ± 8%. The Z-score values at 95% confidence level for most of the elements in both the materials were within ± 1.
机译:分析了三种合成的多元素标准品(SMELS I,II和III)和两种参考材料(RM),国际原子能机构的SL-3和土壤7,以验证基于k_0的内部单标准中子活化分析(IM-NAA)方法的有效性原位相对检测效率。 SMELS和RM中使用的内部单一标准分别是Au和Sc。将样品在Apsara和Dhruva反应器中进行辐照,BARC并使用与8 k MCA耦合的40%相对效率HPGe检测器进行放射性分析。确定了SMELS和RM中23种元素的浓度。对于RM,也可以确定一些元素的浓度,这些元素的认证值不可用。 SMELS中确定的元素相对于指定值的偏差百分比,RM相对于认证值的偏差在±8%之内。两种材料中大多数元素在95%置信度下的Z得分值均在±1之内。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号