首页> 外文期刊>Nuclear Instruments & Methods in Physics Research >Development of a silicon detector monitor for the HIE-ISOLDE superconducting upgrade of the REX-ISOLDE heavy-ion linac
【24h】

Development of a silicon detector monitor for the HIE-ISOLDE superconducting upgrade of the REX-ISOLDE heavy-ion linac

机译:为REX-ISOLDE重离子直线加速器的HIE-ISOLDE超导升级开发硅探测器监控器

获取原文
获取原文并翻译 | 示例

摘要

A silicon detector monitor has been developed and tested in the framework of the beam diagnostics development program for the HIE-ISOLDE superconducting upgrade of the REX-ISOLDE heavy-ion linac at CERN. The monitor is intended for beam energy and timing measurements aimed at the phase tuning of the superconducting cavities. Tests were performed with a stable ion beam, composed of carbon, oxygen and neon ions accelerated to energies from 300 keV/u to 2.82 MeV/u. The energy measurements performed allowed for beam spectroscopy and ion identification with a resolution of 1.4%-0.5% rms in the measured energy range. The achieved resolution is suited for a fast phase tuning of the cavities, which was demonstrated with the third REX 7-gap resonator. The time structure of the beam, characterised by a bunch period of 9.87 ns, was measured with a resolution better than 200 ps rms. This paper describes the results from all these tests and provides details of the detector set-up.
机译:在光束诊断开发程序的框架内开发并测试了硅探测器监控器,以对CERN的REX-ISOLDE重离子直线加速器进行HIE-ISOLDE超导升级。该监视器用于进行光束能量和定时测量,旨在对超导腔进行相位调整。使用稳定的离子束进行测试,该离子束由碳,氧和氖离子组成,这些离子被加速至能量从300 keV / u到2.82 MeV / u。进行的能量测量可用于电子束光谱和离子鉴定,在所测量的能量范围内,分辨率为1.4%-0.5%rms。达到的分辨率适合于腔的快速相位调整,这在第三个REX 7间隙谐振器中得到了证明。光束的时间结构的特征是束周期为9.87 ns,其分辨率优于200 ps rms。本文介绍了所有这些测试的结果,并提供了检测器设置的详细信息。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号