...
【24h】

650 MHz elliptical superconducting RF cavities for CiADS Project

机译:650 MHz椭圆形超导RF空腔,用于CIADS项目

获取原文
获取原文并翻译 | 示例

摘要

650 MHz multicell superconducting radio frequency (SRF) elliptical cavities are proposed for effective acceleration of proton beam in the Chinese initiative Accelerator Driven Subcritical System (CiADS). Two families of such cavities will be used in the driver superconducting linac to accelerate the H~+ beam from 175 MeV to 500 MeV, with the possibility to upgrade the energy to 1 GeV and higher. Detail designs of a six-cell β_(opt) = 0.62 elliptical cavity and a five-cell β_(opt) = 0.82 elliptical cavity will be presented in this paper, including the multi-parameter electromagnetic design and optimization, high order modes analyses, multipacting simulations, mechanical and engineering analyses. Sub-systems of the cavity such as the fundamental power coupler antenna tip design and mechanical design of cavity-helium vessel-tuner system will also be discussed in detail. Three single cell prototype cavities were fabricated and vertical tested to verify the electromagnetic properties, the fabrication and post-processing technologies. Four multi-cell prototype cavities are under manufacturing and expected to be ready in 2021.
机译:提出了650MHz多元电池超导射频(SRF)椭圆形腔,以有效加速中国倡议加速器驱动的亚临界系统(CIAD)中的质子梁。两个家庭的这种蛀牙将用于驾驶员超导LINAC,从175 MEV到500 MEV加速H〜+光束,可以将能量升级为1 GEV和更高。本文将介绍六电池β_(OPT)= 0.62椭圆腔和五单元β_(OPT)= 0.82椭圆形腔的设计,包括多参数电磁设计和优化,高阶模式分析,多分开模拟,机械和工程分析。还将详细讨论诸如腔氦容器调谐器系统的基本功率耦合器天线尖端设计和机械设计的腔的子系统。制造三个单个细胞原型腔并垂直测试,以验证电磁特性,制造和后处理技术。四个多电池原型空腔均在制造中,预计将在2021年准备。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号