首页> 外文期刊>Nuclear instruments and methods in physics research >Fast-neutron multiplicity counter for active measurements of uranium oxide certified material
【24h】

Fast-neutron multiplicity counter for active measurements of uranium oxide certified material

机译:快速中子多重计数器,用于主动测量氧化铀认证材料

获取原文
获取原文并翻译 | 示例
           

摘要

We developed a fast-neutron multiplicity counter (FNMC) based on stilbene and EJ-309 organic scintillators. The system can detect and discriminate correlated photon and neutron multiplets emitted by fission reactions. We used the system to estimate the fissile mass of uranium oxide samples in active interrogation mode at the Zero Power Physics Reactor of Idaho National Laboratory (INL). Two sets of certified reference material (CRM) samples were characterized. The U-235 enrichment of the first set is constant at 93.2 wt%, and the UO2mass ranges between 0.5 and 4 kg. The second set includes samples of increasing enrichment (from 20 wt% to 97 wt%) and constant UO2mass of 230 g. We used two AmLi sources to induce fission reactions in the samples. Despite the intense gamma-ray background of the UO2and interrogating sources, the system could measure induced fission neutrons emerging from the interrogated samples without additional shielding surrounding the sample and only relying on pulse shape discrimination to classify neutron and gamma-ray pulses. The overall neutron count rate and time-correlated counts are well correlated with the sample fissile mass. We also proved that CRM samples can be used to build a calibration curve to assay the U-235 mass of unknown samples of different mass, geometry and enrichment, with an average bias error of 8%, for U-235 mass higher than 390 g.
机译:我们开发了基于E和EJ-309有机闪烁体的快速中子多重计数器(FNMC)。该系统可以检测和区分裂变反应发出的相关光子和中子多重峰。我们使用该系统在爱达荷州国家实验室(INL)的零功率物理反应堆中以主动审讯模式估算了铀氧化物样品的易裂变质量。对两组认证的参考材料(CRM)样品进行了表征。第一组中的U-235浓缩恒定为93.2 wt%,UO2质量在0.5到4 kg之间。第二组包括富集度增加(从20 wt%到97 wt%)和230 g恒定UO2质量的样品。我们使用了两个AmLi源来诱发样品中的裂变反应。尽管UO2和询问源具有强烈的伽马射线背景,该系统仍可测量从被询问样品中产生的裂变中子,而无需围绕样品附加屏蔽,仅依靠脉冲形状辨别即可对中子和伽马射线脉冲进行分类。总中子计数率和与时间相关的计数与样品易裂变质量密切相关。我们还证明了CRM样品可用于建立校准曲线,以分析U-235质量高于390 g的未知样品的不同质量,几何形状和富集的U-235质量,平均偏差误差为8% 。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号