Analytical tool development for coarse break-up of a molten jet in a deep water pool

摘要

A computer code JASMINE-pre was developed for the prediction of premixing conditions of fuel-coolant interactions and debris bed formation behavior relevant to severe accidents of light water reactors. In JASMINE-pre code, a melt model which consists of three components of sub-models for melt jet, melt particles and melt pool, is coupled with a two-phase flow model derived from ACE-3D code developed at JAERI. The melt jet and melt pool models are one-dimensional representations of a molten core stream falling into a water pool and a continuous melt body agglomerated on the bottom, respectively. The melt particles generated by the melt jet break-up are modeled based on a Lagrangian grouped particle concept. Additionally, a simplified model pmjet was developed which considers only steady state break-up of the melt jet, cooling and settlement of particles in a stationary water pool. The FARO corium quenching experiments with a saturation temperature water pool and a subcooled water pool were simulated with JASMINE-pre and pmj et. JASMINE-pre reproduced the pressurization and fragmentation behavior observed in the experiments with a reasonable accuracy. Also, the influences of model parameters on the pressurization and fragmentation were examined. The calculation results showed a quasi-steady state phase of melt jet break-up during which the amount of molten mass contained in the premixture was kept almost constant, and the steady state molten premixed masses evaluated by JASMINE-pre and pmj et agreed well.