Characterization of drying behavior of granular materials using magnetoelastic sensors

摘要

The aim of the present paper is to show that magnetoelastic sensors can furnish important information about the drying behavior of ceramic materials, and are, therefore, possible alternatives to ultrasonic or cantilever techniques. Sensitive measurements of the resonant frequency of coated amorphous ribbons show characteristic structures at different phases of drying. A model relating the resonant frequency of a magnetoelastic sensor to elastic properties of an applied thin film coating is extended to include the magnetic field dependence of the elastic modulus, the ΔE effect. In this manner, the stress developed during the drying process which contributes to the magnetic anisotropy, can be introduced into the problem. The model is applied to hard clay slurries drying on Metglas 2826MB3 ribbons. The long time value of the sensor resonant frequency is found to be consistent with elastic properties of the clay and the sensor appropriately indicates the appearance of stresses when the meniscus of the drying fluid begins to enter the pores of the solid.