Combined embedded and surface-bonded piezoelectric transducers for monitoring of concrete structures

摘要

Piezoelectric lead zirconate titanate (PZT) transducers are increasingly used for monitoring various engineering structures. PZT transducers are used for monitoring structures based on the electromechanical impedance (EMI) for a single PZT and the wave propagation technique for multiple PZTs. In concrete structures, the EMI sensing region is small due to high damping of the concrete. Using the wave propagation technique with high actuation voltage, a larger area can be monitored. The smart aggregates (embedded PZT transducers) can be employed using the wave transmission technique to monitor very large areas with a reasonably low actuation signal. The combination of smart aggregates (using the wave transmission technique) with surface bonded PZTs (using the wave propagation technique) can provide an effective method to study both the local and overall conditions of the structure. In this work, a concrete beam with the dimensions of 220 × 40 × 20 cm was cast and nine PZT transducers were embedded or attached on the beam. The PZT readings were correlated with the damage on the structure. Combination of smart aggregates (using the wave transmission technique) with surface bonded PZTs (using the wave propagation technique) for SHM was studied. The results show that this combination provides an effective way to assess both the local and overall conditions of the structure.