Designing a New Dynamic Mechanical Analysis (DMA) System for Testing Viscoelastic Materials at High Frequencies

摘要

The aim of this study is to design a new dynamic mechanical analysis (DMA) measurement system that can operate for shear tests at frequencies as high as 10kHz with strain amplitudes sufficient for viscoelastic materials operating in high-frequency deformation applications, such as tire rubbers. The available DMA systems in market cannot effectively operate for accurate and direct measurement of viscoelastic material properties for applications dealing with high-frequency deformation of materials. Due to this, the available DMA systems are used for indirect measurements at low frequencies and low temperatures, followed by using time-temperature superposition principle to predict the properties at high frequencies. The goal of this study is to make the range of the test broad enough to eliminate the use of the time-temperature superposition principle in the determination of properties of viscoelastic materials. Direct measurement of viscoelastic material properties and increasing the accuracy of results are the main motivations to design a new DMA system. For this purpose, the state-of-the-art technologies to achieve high frequencies and strain amplitudes as well as instrumentation and control of the system are studied. The design process is presented in this paper.