Dynamic signal driving strategy based high speed and low powered dual edge triggered flip flop design used memory applications

摘要

Power utilization assumes a massive part in any of the integrated circuits, and it's rundown as a stand-out amongst essential difficulties in the universal innovation guide into semiconductors. Generally in integrated circuit, flip-flop and clock distribution system consume a lot of energy since they make and utilize the most extreme number of internal transitions. In the clock distribution system, the clock signal circulates from a typical point to every one of the components that required for the circuit. However this capacity is more important to the synchronous framework, much consideration needs to provide for the attributes of these clock signals. In the sequential circuits, a clock distribution system spends a lot of power given the high operating frequency of high capacitance. An existing approach to reducing the limits of a clock signal is based on the quantity of clocked transistors. In this, an advanced procedure is proposed and evaluated by utilizing Dual-Edge Triggered Flip-Flop (DETFF) depends on the Dynamic Signal Driving (DSD) strategy. This DETFF is executed in sequential circuits that have been ordered using Tanner Electronic Design Automation (EDA) tool which is used to simulate and examine control by using Dynamic Signal Driving (DSD) strategy. The outcomes demonstrate that the total power utilization is decreased in sequential benchmark circuit design. A number of Flip flops have been designed by various technologies such as reducing area, delay, and power, but this proposed dynamic signal driving scheme can be used for any integrated circuit- that can be reduced to all these three parameters to give the best trade-off for a particular ASIC platform. (C) 2019 Elsevier B.V. All rights reserved.