首页> 外文期刊>Journal of Microelectromechanical Systems >Incompressible and Compressible Flows Through Rectangular Microorifices Entrenched in Silicon Microchannels
【24h】

Incompressible and Compressible Flows Through Rectangular Microorifices Entrenched in Silicon Microchannels

机译:通过硅微通道中固定的矩形微孔的不可压缩和可压缩流

获取原文
获取原文并翻译 | 示例
           

摘要

Incompressible and compressible flows through indispensable configurations such as rectangular microorifices entrenched in microchannels have been experimentally investi gated. The current endeavor evaluates the effects of microorifice and microchannel size, estimates the discharge coefficients associ ated with both compressible and incompressible flows, examines the contraction coefficients, probes subsonic and supercritical gas flows, and explores the presence of any anomalous effects such as those reported for microchannels. The discharge coeffi cient in incompressible flow, using deionized (DI) water as the working fluid, rises and peaks at a critical Reynolds number, (200 ≤ Re{sub}(Crit) ≤500). The reported range of the transitional Reynolds number compares favorably with the values observed in conventional scale studies and suggests the absence of any irregular scaling effects. Furthermore, nitrogen flows through various microorifices suggests that the constriction element rather than the microchannel area determines the flow rate. Additionally, the critical pressure ratio at choking is close to the isentropic value (0.47 ≤ (P{sub}2/P{sub}1){sub}(crit) ≤ 0.64) and no anomalous scale or slip effects have been observed. Unlike macroscale compressible flows through an orifice, the losses seem minimal and the discharge coefficients are close to unity. The geometry acts as a smooth converging-diverging nozzle and the mass flow rate trends appear similar to the data obtained in micronozzle flows.
机译:已经通过实验研究了通过不可缺少的构造,例如在微通道中根深蒂固的矩形微孔的不可压缩流和可压缩流。当前的努力是评估微孔和微通道尺寸的影响,估算与可压缩和不可压缩流量相关的排放系数,检查收缩系数,探测亚音速和超临界气体流量,并探索是否存在任何异常影响,例如报告的微通道。使用去离子(DI)水作为工作流体的不可压缩流量的排放系数在临界雷诺数(200≤Re {sub(Crit)≤500)”处上升并达到峰值。报道的过渡雷诺数范围与常规比例尺研究中观察到的值相比具有优势,并表明没有任何不规则的比例尺效应。此外,氮气流经各种微孔表明,收缩元件而不是微通道面积决定了流速。另外,窒息时的临界压力比接近等熵值(0.47≤(P {sub} 2 / P {sub} 1){sub}(crit)≤0.64),并且未观察到异常的水垢或滑移效应。与通过孔的宏观可压缩流不同,损失看起来很小,排放系数接近于1。该几何形状充当平滑的收敛-发散喷嘴,并且质量流率趋势看起来类似于在微喷嘴流中获得的数据。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号