首页> 外文期刊>IEEE / ASME Transactions on Mechatronics >Design and Fabrication of a Locomotive Mechanism for Capsule-Type Endoscopes Using Shape Memory Alloys (SMAs)
【24h】

Design and Fabrication of a Locomotive Mechanism for Capsule-Type Endoscopes Using Shape Memory Alloys (SMAs)

机译:使用形状记忆合金(SMAs)的胶囊型内窥镜机车机构的设计和制造

获取原文
获取原文并翻译 | 示例
       

摘要

Endoscopes are medical devices to diagnose various kinds of diseases throughout the whole gastrointestinal tracks. Generally, they are divided into conventional push-type endoscopes and more recently developed wireless capsule-type endoscopes. The conventional endoscopes cannot reach the small intestines and generate pain and discomfort to patients due to the stiffness of their body. Such disadvantages do not exist in wireless capsule-type endoscopes. However, commercialized capsule-type endoscopes move passively by peristaltic waves (and the gravity), which makes it impossible for doctors to diagnose the areas of his or her interest more thoroughly and actively. To address this problem of passivity, a locomotive mechanism is proposed for wireless capsule-type endoscopes. Prototypes with micro brushless dc motors, ionic polymer metal composite actuator, and shape memory alloy (SMA) wires are designed and fabricated for preliminary tests. Based on the tests, spring-type SMA actuators are selected to be microactuators for capsule endoscopes. Thus, two-way linear actuators using a pair of SMA springs are developed based on a static analysis on them. Moreover, a simple and effective clamping device is developed based on biomimetic approach. A prototype endoscope with four pairs of SMA springs and four clampers was developed. It has 13 mm in diameter and 33 mm in total length, with a hollow space of 7.6 mm in diameter to house other parts that are needed for endoscopy such as a camera, an RF module, sensors, e.g., for endoscopic ultrasound, and a battery. A sequential control of the four actuators improves the efficiency of locomotion up to four times. To validate the performance of the proposed locomotive mechanism, a series of experiments were carried out including in-vitro tests. The results of the experiments indicate that the proposed locomotion mechanism is effective to be used for micro capsule-type endoscopes.
机译:内窥镜是诊断整个胃肠道中各种疾病的医疗设备。通常,它们分为传统的推入式内窥镜和最近开发的无线胶囊型内窥镜。常规的内窥镜由于其身体的僵硬而不能到达小肠并给患者带来疼痛和不适。在无线胶囊型内窥镜中不存在这样的缺点。但是,商业化的胶囊型内窥镜通过蠕动波(和重力)被动移动,这使得医生无法更彻底,更主动地诊断他或她感兴趣的区域。为了解决这种被动性问题,提出了一种用于无线胶囊型内窥镜的机车机构。设计并制造了带有微型无刷直流电动机,离子聚合物金属复合致动器和形状记忆合金(SMA)导线的原型,用于初步测试。根据测试,选择弹簧型SMA执行器作为胶囊内窥镜的微执行器。因此,基于对它们的静态分析,开发了使用一对SMA弹簧的双向线性执行器。此外,基于仿生方法开发了一种简单有效的夹持装置。开发了具有四对SMA弹簧和四个夹具的内窥镜原型。它的直径为13毫米,总长度为33毫米,具有7.6毫米的中空空间,用于容纳内窥镜检查所需的其他部件,例如相机,RF模块,内窥镜超声传感器等。电池。四个执行器的顺序控制将运动效率提高了四倍。为了验证所提出的机车机制的性能,进行了包括体外测试在内的一系列实验。实验结果表明,所提出的运动机制可有效用于微胶囊型内窥镜。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号