Influence of emulsifier content on cement hydration and mechanical performance of bitumen emulsion mortar

摘要

The objective of this research was to investigate the influence of a cationic emulsifier on the kinetics of cement hydration and on the overall mechanical performance of bitumen emulsion mortar, as an essential structural component of cold asphalt mixtures, within a 28-day curing period. This influence was investigated as a function of emulsifier content and bitumen grade, selected to cover the whole range of their applicability. The hydration kinetics was evaluated by heat release of cement pastes and bitumen emulsion mortars. The residual w/c was determined at characteristic points during curing. The emulsifier showed a very powerful effect on the complex relation between hydration kinetics, emulsion rheology, and water binding. The presence of the emulsion initially accelerated the hydration, with no main peaks and dormant period observed, but had almost no effect on the ultimate hydration degree. The rate of hydration during the rest of the curing period was critically dependent on the residual w/c which was decisively influenced by the content of emulsifier. The cement could be expected to reach a very high degree of hydration only in mixtures with the highest emulsifier content, considering the specimens as a whole. Together with emulsion breaking at early stage, cement hydration later on was directly reflected on indirect tensile properties of the mortars, which performed from very ductile to very brittle. In conclusion, the emulsifier was recognised as a key factor for a fundamental understanding of the mechanical performance of cold asphalt mixtures.