首页> 外文期刊>Materials and structures >Lateral dilation and limited value of volumetric ratio of stirrups for ultra-high strength concrete confined with spiral stirrups
【24h】

Lateral dilation and limited value of volumetric ratio of stirrups for ultra-high strength concrete confined with spiral stirrups

机译:超高强度混凝土刺毛的横向扩张和体积比的有限值,包括螺旋箍镫

获取原文
获取原文并翻译 | 示例

摘要

Ultra-high strength concrete (UHSC) has high compressive strength and tends to fail in brittle under axial compression. The lateral confinements of spiral stirrups can be significantly enhanced the ductility of UHSC. However, it was a huge challenge to evaluate the lateral dilation and determine the proper ranges of the volumetric ratio of stirrups in confined UHSC. Seventy-five UHSC circular columns confined with high-strength spiral stirrups were tested under axial compression to reveal strain development of stirrups and determine the proper ranges of the volumetric ratio of stirrups. The parameters investigated include the concrete strength in the range of 99.86-176.42 MPa, the tensile strength of stirrups was 873-1215 MPa and the volumetric ratios of stirrups in the range of 0.9-2.0%. The experimental results showed that both the axial stress-lateral strain curves and the axial strain-lateral strain curves of confined UHSC were consisted of three parts, especially, the axial strain-lateral strain curves were consisted of two linear parts connected with a transition part. The prediction models for the lateral strain-axial strain curves of confined UHSC were established. The strain of stirrups at the peak stress of confined UHSC had close relationships with the compressive strength of concrete and the volumetric ratio of stirrups. The prediction models for the strain of stirrups at the peak stress were proposed. Furthermore, the appropriate volumetric ratio of stirrups in confined UHSC was determined, which the confined UHSC can satisfy the requirements of both ductility and efficient lateral confinements.
机译:超高强度混凝土(UHSC)具有高抗压强度,并且在轴向压缩下脆弱地失效。螺旋刺磨的横向约束可以显着提高UHSC的延展性。然而,评估横向扩张并确定限制UHSC中的搅拌型体积比的适当范围是巨大的挑战。在轴向压缩下测试了七十五个UHSC圆柱,局限于高强度螺旋旋转粒子,以揭示搅拌的应变发育,并确定搅拌器的体积比的适当范围。研究的参数包括99.86-176.42MPa范围内的混凝土强度,搅拌的拉伸强度为873-1215MPa,搅拌的体积比率为0.9-2.0%。实验结果表明,轴向应力 - 横向应变曲线和狭窄UHSC的轴向应变曲线曲线包括三个部分,特别是轴向应变 - 横向应变曲线由与过渡部件连接的两个线性部件组成。建立了限制UHSC的横向应变轴向应变曲线的预测模型。密闭UHSC的峰值应力下的搅拌菌株与混凝土的抗压强度和搅拌器的抗压强度密切相关。提出了峰值应力下搅拌菌株的预测模型。此外,确定了限制UHSC中的搅拌器的适当体积比,该孔的UHSC孔可以满足延展性和有效的横向约束的要求。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号