首页> 外文期刊>Materials science forum >Supersaturation Behavior of Al Solid Solutions and Its Effect on Tensile Property in AI-7Si-xMg Alloys during Solution Heat Treatment (x: 0.4 and 0.8 mass%)
【24h】

Supersaturation Behavior of Al Solid Solutions and Its Effect on Tensile Property in AI-7Si-xMg Alloys during Solution Heat Treatment (x: 0.4 and 0.8 mass%)

机译:Al固溶体的过饱和行为及其对固溶热处理期间AI-7Si-xMg合金的拉伸性能的影响(x:0.4和0.8质量%)

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Supersaturation behavior of Al solid solutions and its effect on tensile property in Al-7Si-0.4Mg and Al-7Si-0.8Mg alloys during solution heat treatment were investigated in this study. As a result of Mg solubility measurement for Al solid solitions after solution heat treatment for 6 hrs by electron probe micro analyzer (EPMA)-wavelength-dispersive X-ray spectroscopy (WDS), Al-7Si-0.8Mg alloy had the higher Mg solubility, about 0.55 mass%, corresponding to that of Al-Si-Mg ternary phase diagram. From the tensile test, AI-7Si-0.8Mg alloy showed the improved strength and similar elongation to that of Al-7Si-0.4Mg alloy.
机译:研究了固溶热处理过程中Al固溶体的过饱和行为及其对Al-7Si-0.4Mg和Al-7Si-0.8Mg合金拉伸性能的影响。通过电子探针显微分析仪(EPMA)-波长色散X射线光谱法(WDS)测量固溶热处理6小时后的Al固溶体的Mg溶解度,Al-7Si-0.8Mg合金的Mg溶解度更高约为0.55质量%,与Al-Si-Mg三元相图相对应。通过拉伸试验,AI-7Si-0.8Mg合金显示出与Al-7Si-0.4Mg合金相比更高的强度和类似的伸长率。

著录项

  • 来源
    《Materials science forum》 |2017年第2017期|73-77|共5页
  • 作者单位

    Korea Institute of Industrial Technology, 156 Gaetbeol-ro, Yeonsu-gu, Incheon, Korea;

    Korea Institute of Industrial Technology, 156 Gaetbeol-ro, Yeonsu-gu, Incheon, Korea;

    Korea Institute of Industrial Technology, 156 Gaetbeol-ro, Yeonsu-gu, Incheon, Korea;

    Korea Institute of Industrial Technology, 156 Gaetbeol-ro, Yeonsu-gu, Incheon, Korea;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Al-Si-Mg alloy; AI_2Ca; Mg_2Si; solution heat treatment;

    机译:Al-Si-Mg合金;AI_2Ca;Mg_2Si;固溶热处理;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号